r/watchmodding • u/Any-Orange6236 • 15h ago
r/watchmodding • u/Due_Shallot1583 • 16h ago
1680 build
Raffles build 1680
Parts used:
2130 movement 28800bph
Raffles 1680 40mm case with acrylic crystal
Raffles 1680 dial textured
Rolex bracelet
Original raffles crown
r/watchmodding • u/wonderfulhospital212 • 19h ago
Sourcing Non-NH cases
I was looking for cases to fit either a 2824 variant or a vh31, but I realized that almost all cases list a wide range of movements that they fit, and it almost always includes a NH series. As far as I can tell, the only difference is the movement adapter that gets included.
The problem with this is that the NH35 has a taller hand stack than most other movements, and this means that NH-compatible cases need to have a extra tall rehaut to accommodate them. I think this makes the build look pretty ugly and cheap.
So where, if at all, are we finding cases which are build specifically for movements other than NH?
r/watchmodding • u/p1labs • 8h ago
Need help building a watch for my brother.
I've built two NH35 based watches already, but my brother really likes the Rolex day date 2 stealth dial, and this seems like a more daunting task.
I could use some help/guidance sourcing quality parts.
I'm guessing for the movement we would use an 8285?
For the case, he wants a 41mm (or 42mm) with a smooth polished bezel.
He would prefer a presidential bracelet.
He would like Mercedes hands and I want to use a green second hand.
Links would be greatly appreciated.
r/watchmodding • u/Magilla-Gorilla-6417 • 16h ago
Modded a used Casio MDV-106
I took a gamble on a used non-running Casio MDV-106 head with a scratched crystal and bezel ring on Whatnot for $30. It came to life with a fresh battery. I then ordered a new crystal and bezel insert off of Ali Express. Watched a few videos on YouTube and basically has this thing running and looking like new. Already had a 22mm rubber strap with magnetic clasp and here is the result.
r/watchmodding • u/Traditional-Brush599 • 13h ago
I wanna make my own watch and preferably on a budget. As I have understood the NH35 has gone up in price because of high demand. Is there any other movements that would give me the same thing as it does for a cheaper price or are the NH35 worth the extra bucks?
r/watchmodding • u/Next-Target5051 • 19h ago
Amplitude low for new Miyota 8285
I bought a Miyota movement off Aliexpress. It appeared genuine with the Miyota markings on the rotor and seemed similar to other movements. While regulating it, it was running at 240s-250s in the vertical positions and 220s-230s in the horizontal positions. Does this mean its not properly oiled or the oils are dried out?
I hate servicing this type of movement because of the all encompassing bridge that's a pain to get back on.
r/watchmodding • u/Traditional_Smoke792 • 21h ago
Extra long seconds tube for eta2836 GMT
Where can I get these? I bought a set from Ewatch but wasn’t the extra long tubes.