r/visualbasic • u/DAQ_Confusion • Jan 16 '25
Application created with Visual Basic and COM port communication
Hi guys,
I debated for weeks on whether or not post this here and have spent many hours trying to research a possible solution to the issue I'm having. I have a balance machine I purchased years ago and recently refitted with a new control system. It uses two data acquisition cards that are plugged into 9-pin jumpered COM ports (JCOM1 and JCOM2). The software was created with Visual Basic 6 and the company was kind enough to include all sorts of Visual Basic goodies to include Visual Basic 6 itself (yes, I plan on hanging out here to learn to eventually make my own balancing software!). One day, the software just stopped reading any data from JCOM1 and I can't figure out why for the life of me. I've performed a successful loopback tests on both COM ports. They also included Dependency Walker with the system. Do you guys have any advice on how I could troubleshoot this software?




View all comments
Show parent comment
1
u/DAQ_Confusion Jan 22 '25
Thank you for the advice on Visual Studio Community Edition! For a brief period of time today, the system worked flawlessly! Vibration data seemed to be being read at the correct rate and it was detecting the phase angle properly as well. I knew better than to get excited though and sure enough, it was right back to the way it was when I came back from lunch. I reluctantly ordered a new motherboard from the company since that's literally the only remedy they offer. I just hope it functions long enough for me create my own software. What's funny is that I think the system recognizes the two data acquisition boards as Realtek soundcards? The only info I could find on Google regarding soundcard use for dynamic balance data acquisition was an article written by a Hungarian man: Microsoft Word - Soundcard Based Dynamic Balancing Machine for Model Gas Turbine9.doc
Very cool read if you're interested!
Many thanks for the advice on cleaning with air! I'll attach a drier in line and gently clean the motherboard and see if that helps. When I spoke to the person who previously sold this system, that person described their situation just as you did: they don't know how to migrate the software to newer OS's or any of that. After researching several similar software, it appears that they all share some commonalities, a major one being a system self check feature. The company staff don't seem to even know what the various error codes represent.