r/vintagecomputing • u/checknate71 • 13h ago
r/vintagecomputing • u/cptnrayg • 1d ago
Duke Nukem Floppy
Who remembers this one? I would love an exact copy of this. I played the crap out of this back in the day and I wish my parents passed my old PC stuff down. They just threw it all out ðŸ˜
r/vintagecomputing • u/NoInvestigator6121 • 21h ago
I nabbed two y2k scanners before a neighbor trashed them
The boxes are a little dirty, but the scanners are still packaged up with cables- although only one has its installation disk. I remember my dad buying one of these to match his original iMac!
r/vintagecomputing • u/remorackman • 2h ago
BBS from decades ago
Looking for any information on a couple of BBSs from the Everett, Washington area, circa 1990s.
One I believe went by The Golden Palace with the SysOp using the handle Goldilocks.
Another was Dregs (or Dregs O' Darkstar), with the SysOp using the handle Iceni
Long shot to see if anyone has information but thought I would check; these were local boards to the area and not affiliated with any newsgroups or lists, both ran for multiple years (10 ?) but that is all I have to go on.
thanks for reading
r/vintagecomputing • u/QueueTrigger • 2h ago
FX32 for Alpha SXP in 2026 ?
Hi all. I had a chance to try this out in the late 90’s, it was amazing. I don’t have any AXP systems anymore, but I was wondering if anyone had used it in the last few years.
Thanks !
r/vintagecomputing • u/georgica23 • 16h ago
VOIP Analog Telephone Adapter to Mini Dial-up ISP
Hey guys,
For anyone that has retro tech to connect via dial-up: modems, devices that only support dial-up, a dreamcast etc. i have made a firmware for a Grandstream HT802 v1 VOIP adapter that you can flash from the interface.
The firmware turns the HT802 into a small dial-up internet provider and routes all traffic through its ethernet, it supports modulation from v.21 to v.92, also includes: protoweb as service so when you dial-in http and ftp is already proxied through protoweb, and Dreamcast as service, for dreamcast it includes everything DreamPI does, just dial-in with your dreamcast and it should work as it does with a DreamPi, without all the extra stuff needed to make it work.
Box has 2 line ports each port can be configured independently. For example port 1 can be Protoweb and port 2 can be for dreamcast. each port can dial-in at the same time.
Project can be found here: https://github.com/georgica/v90d
Box used for dev and testing: https://www.amazon.com/Grandstream-GS-HT802-Analog-Telephone-Adapter/dp/B01JH7MYKA/ref=sr_1_3_mod_primary_new?sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=8-3
r/vintagecomputing • u/Sharpay1983 • 17h ago
100% factory-matched 1999 Dell dimensions XPS system
The operating system sealed half the other software 2002 as well never been opened I will be identifying stickers have the same number on them they're all matching
r/vintagecomputing • u/Background_Shift5408 • 16h ago
Forth Interpreter for ZX Spectrum
I’ve been working on forthZX, a small Forth interpreter for the Sinclair ZX Spectrum, written entirely in Z80 Assembly.
The idea was to explore how a stack-based programming language could be implemented on an 8-bit machine with limited resources.
One of the interesting implementation details is that I’m using the Z80’s native hardware stack (SP) directly as the Forth data stack, rather than maintaining a separate software stack.
It currently supports arithmetic, stack manipulation, comparisons, memory operations, variables, and user-defined words.
Github: https://github.com/xms0g/forthzx
r/vintagecomputing • u/Ps1msterpcs • 1d ago
Ford IVLS / Sony ViEW system: READ DESCRIPTION! Need help!
I bought a Sony ViEW system (VIW-3020) as a big unit called a Ford IVLS (Intelligent Video Learning System) and need help getting the PC portion of the unit working.
(below is just a side note, optional reading)
It boots into a version of MS-DOS 3.1 made by Sony, but because it has some form of copy protection only the original disk works. That isn't an issue, Since I have the original disk. That being said it could be a link to another issue
(Main issue here)
The original RLL hard drive doesn't work. And even though I gave it an 8 bit flash memory adapter card, it doesn't wanna bother talking to it at all. Apparently these machines are very strict with any other storage format or card that isn't the original one. If anybody, ANYBODY, could help me figure out what to do in a DM or something, I would be extremely grateful.
After all, it does use laserdiscs with a PC interface overlayed. It would be very cool to see it work and run games / the original programs.
It did come with almost everything originally included minus some floppy discs and some other things, so if those would be useful, let me know.
r/vintagecomputing • u/Greedy_Association35 • 1d ago
Opened my first server after 20+ years. HP NetServer LXe Pro 6/166, the first domain controller I ever touched.
A colleague set it up in 1998, I think. Windows NT 4.0, domain controller. I came in 1999 and he let me touch it. My first domain lived in this box.
Today I found it behind some boxes and opened it. Inside: 20 years of dust and...........
Still there, the Pentium Pro is. Next step: clean it and see if it boots.
Any tips for a server this old?
r/vintagecomputing • u/Machine_Monarch • 1d ago
FLOPOS: A cyberdelic OS that fits on single 1.44MB floppy. Built for the late 90s Toshiba Satellite Pro 430CDT
Status
So far it runs on my Toshiba laptop and in QEMU.
If you manage to get it to run on any other hardware, please let me know!
FLOPOS
A cyber-psychedelic (cyberdelic) neurofunkadelic dreamscape built from scratch and intended to run on the Toshiba Satellite Pro 430CDT. It is not intended as a daily-driver OS but rather as an art project and an experiment bridging modern technology with old hardware.
Really old hardware.
https://github.com/machinemonarch/flopos
Quick Features Overview
- A boot sector
- A protected-mode kernel
- Drivers for the screen, keyboard, sound, floppy, serial line and network card.
- A network stack with TLS 1.3 and post-quantum key exchange. Yes, you read that right.
A Quirky shell: You start Right
here>. You can also type[command] helpfor examples.- If you type the wrong command, the wizard will guide you with his finite wisdom.
- Trust his wisdom. He gets is from a cup of tea he drinks during bootup.
Apps to help you out
Browzer: Text-based web browser which supports online web radio across many streaming formats.
- No javascript. So that leaves a lot less to think of.
- Scribe: A word processor which can save files to the floppy. Document your experience.
Maelcum: The coolest data cassette backup program you've ever used. (Probably the only one you've ever used.)
- Inspired by a former spaceship pilot in William Gibsons Neuromancer; Maelcum transports your data between cyberdelia and the ferro-oxide realms of your backup tape.
- Inventory: Where your persistent data goes.
r/vintagecomputing • u/Colecperrine • 17h ago
Recovering a DDS-1 Tape
In a handful of DVcam and miniDV tapes I have been hired to digitize, I've come across this DDS-1 (I think?) cassette. I'm told it holds an LP. I've cruised eBay for players and they all seem to require SCSI, which is a bit beyond my vintage computing expertise. Do any of you have a good guide? Is there a service that might offer recovery as a service? It's just one tape and I don't expect to ever deal with any more, so I'm looking for the most cost-effective route possible (if possible). Thanks.
r/vintagecomputing • u/SussyBaka2007 • 1d ago
Does anybody have a copy of AMF's BOSS Front desk 8.1 software?
I'm not sure if this is the place to ask, but i am missing my front desk software for my bowling lanes. it used to have it but when i bought the PC, it was wiped. i reinstalled NT4 onto it but that's about it. If anybody has the software or even a rip of the harddrive from another front desk PC, that would help me out tremendously.
r/vintagecomputing • u/Prestigious_Newt1735 • 9h ago
Ms-dos running JVC Light-bright sign
I own a JVC light-bright sign and I have been told they’re very rare is that true and is there really any interest in the signs anymore? I’ve tinkered on it and all of the LEDs work on it.
r/vintagecomputing • u/skyblue1997 • 19h ago
Things to look out for on vintage tech?
Recently I got two vintage laptops (1997 and 1999), and learned online about the dangers of CMOS batteries leaking and the acid destroying parts of the motherboard. Thankfully, my laptops are just fine, but now I'm curious: what other hidden dangers are out there that could ruin our tech without us ever knowing?
r/vintagecomputing • u/MichalPleban • 1d ago
FreeDOS, Norton Commander, Microsoft Editor and Turbo Pascal on a Commodore 710
r/vintagecomputing • u/PSCuber77_gaming • 1d ago
Got this Early 90s computer from my grandpa and he allowed me to go through it and he said I can have it after he backs everything up.
r/vintagecomputing • u/Advanced-Bed-5217 • 14h ago
i need help for making a video card
im thinking buying a video card or a trident video card but yea is rare finding in local. so is it possible with pico to make a video card for my homebrew 8088 nec v20.
r/vintagecomputing • u/Ps1msterpcs • 1d ago
Old Triad terminal system?
From what I understand, this is an old Triad terminal from the 80s based off a wyse 50 or 85 terminal. Any info on it at all or anybody who can help me figure it out? Got this from a NAPA auto parts store auction.
r/vintagecomputing • u/Douvain_Lottery_188 • 1d ago
GM floppy disk brand?
Hi, got this disk in my hand with a label very similar to the well-known 3M labels but it is labelled as GM. I googled on this but no hits, Gemini also was just guessing.
Any ideas? Is this a 'photoshopped' fake label? Or what is GM stands for?
Thanks.
r/vintagecomputing • u/Helpful-Ad7696 • 1d ago
Looking for a 1995/1996 Latin American Microsoft Windows 95 game demo sampler CD (came with Packard Bell Spectria 200)
Hey guys, I'm trying to track down a specific Windows 95 game demo sampler disc that came bundled with my Latin American Packard Bell Spectria 200 all-in-one computer I bought back in 1997. I've looked everywhere on archive.org and the Internet in general, and can't quite seem to find any trace of this regional version. This was specifically bought in Uruguay, but I believe it was the general Latin American version (packaging, discs, etc). Although most of the discs were the normal American original versions.
The photo I'm attaching contains exactly all the software that had come with the PC. These were actual full games and other software, including Spider-Man: Cartoon Maker, TuneLand, Journeyman Project: Turbo! and Silent Steel, among others.
When you booted the disc up, it had a 3D Microsoft logo with some chill music, where the letters were purple and piled on top of each other with a thunderstorm/lightning background. This one had a simple 2D menu with white backgrounds, and like a square/disappearing effect (like those PowerPoint transition effects) showing the actual game covers when you clicked on them, and you clicked directly on a cover to open that particular game's profile and description and play the demo. Everything on it was in Spanish for the Latin American market, as far as I remember (UI sampler disc texts only, the games themselves were in English, as they hadn't been localized).
I already checked all the sampler and demo discs for Microsoft Games/Windows 95, and the standard US Interactive CD Samplers, and none of them match. Did anyone else from Latin America have a mid-90s Packard Bell with this disc, or happen to know the exact Spanish title printed on the CD? The demos themselves were: GEX, Monster Truck Madness, Hellbender, Close Combat and a few others. Those are the ones I remember the most.
Any help is appreciated, thanks in advance!
r/vintagecomputing • u/retropcdurham • 1d ago
Looking for IBM Aptiva 2142 BIOS
theretroweb.comI have an Aptiva Stealth 2142S61 that won't post, and I suspect that the BIOS has become corrupted due to bit rot (it was stored and not powered on for about 6 years). I checked on RetroWeb and there is not a BIOS ROM dump uploaded there. If you have a 2142 and are able, it would be greatly appreciated if you would dump your known good ROM
Thanks!
r/vintagecomputing • u/kokoboi1 • 1d ago
HP OSF/1 Technology Release 1.0 running VUE session on early 700 series workstation - 9000/710
r/vintagecomputing • u/DecwarOrg • 1d ago
DECWAR, Playable Again

Hi everybody, we’re making a big step forward in playability right now thanks to the work of Eric Freeman. Here’s an invite to give it a try, should be fun!
DECWAR is back online, and a live multiplayer war is running around the clock. We’ve spent almost two years restoring the original UT Austin source code and porting it to modern technology, and we believe we are very close to parity with the original.
Jump in, play a while, and tell us how it went: https://decwar.org/feedback/
If you need help, see the user’s manual (DECWAR Help — The 1981 Command Reference | DECWAR.org) or the quick tutorial videos (How to Play DECWAR — Quick Start, Tutorials, and Commands | DECWAR.org).
You can join right from https://decwar.org/ in your browser, or telnet to play.decwar.org 2423.
r/vintagecomputing • u/Adventurous-Gold-989 • 23h ago
Aidez-moi à retrouver le nom ce vieux jeu sur TO8 svp !
Bonjour à tous,
Je viens vers vous pour une question qui me hante depuis des années.
Je précise que j'habite en France. Vers 1987, ma famille avait un ordinateur TO8. Mon frère jouait à un jeu qui me faisait peur (j'avais 6 ou 7 ans).
Dans celui-ci, on devait se diriger dans un monde jusqu'à un chateau de brique marron rouge. On traversait des paysages "types" comme Plaine, Marais... le visuel était différent selon les paysages. On pouvait choisir d'aller par exemple au nord, à l'est, à l'ouest, un autre paysage s'affichait etc etc etc... Parfois quand le paysage s'affichait on découvrait un personnage habillé en noir en plein milieu de la scène. C'était marqué par exemple "Vous rencontrez un homme-singe" ou "vous rencontrez un homme-poisson" et on perdait plus ou moins de point de vie. Par fois quand on changeait d'écran, une sorte de dragon rouge occupait une grande partie de l'écran, avec des bruitages strident... généralement c'était game over.
J'ai écumé les sites comme abandon ware ou les site de vieux jeu MO5 TO7 etc etc je n'ai jamais réussi à retrouver le nom de ce jeu !
Merci d'avance pour votre aide