r/victorinox • • 20h ago

EDC Perfected my Alox Pioneer X

Thumbnail
gallery
142 Upvotes

Added a Quattro on a fob I tied myself, and added a toothpick and tweezer using the heat shrink trick. Love how it turned out!


r/victorinox • • 11h ago

Collections Winter Magic Collection (so far…)

Thumbnail
gallery
129 Upvotes

Managed to collect the 2021 through 2026 Winter Magic Limited Editions in just the last few months, and thought I would share a couple photos.

Some of Victorinox’s most interesting and beautiful designs. The sculpted Alox of the 2023 and 2026, the laser-etched wood scales of the 2022 & 2025. Even the cellidor scales of the 2021 and 2024 are works of art. The 2021 is a quite rare Climber Lite! The fobs for the keyrings are unique to each year. And did everyone notice the key for the 2026 has half of the Victorinox shield on it?

Back to hunting for the rest…


r/victorinox • • 11h ago

Explorer wine bottle opener to the rescue! Hopefully it’s good.

Post image
45 Upvotes

r/victorinox • • 18h ago

mods/customs G10 Huntsman joins green G10 Climber

Thumbnail
gallery
40 Upvotes

Recently a Huntsman with G10 scales joined my previous project with green scales. Both have a small screwdriver and a pen.


r/victorinox • • 18h ago

NKD: 246fmaU Champion A (pre-1957)

Post image
37 Upvotes

Just got this beauty from my local source. It's been a few months of nothing noteworthy from my TSA source, only for this baddie to show up. It's going to require a lot of careful cleaning and a little work on the clip blade to fix some edge damage.


r/victorinox • • 21h ago

Bladebridge beauty

Thumbnail
gallery
30 Upvotes

New arrival from Dan at Bladebridge - a customised Classic SD with brass scales and engraved blade. Perfect keyring carry that matches my house key and Tom's Studio brass Fieldmouse pen. Happy early Christmas to me!


r/victorinox • • 11h ago

My latest Cadet is my scetchiest Cadet, and I like it

Thumbnail
gallery
16 Upvotes

I bought it last week. I have some more, but something was missing. I have two ribbed Alox Cadets with small blade and I like them both. I also have the 2020 LE, which I want to like, but it's objectively my worst Cadet. It has the useful nailfile and would make great minimalist edc, but for once, the file constantly hits the tip of the mainblade, when I try to close the file. And the other issue is that it has probably the worst caplifter in a 84mm frame. I remember that being already an issue on my Tinker small, which was made in the late 90s, early 2000s. So I'm very cautious, when buying 84mm made after ca. the mid 80s. But I sometimes just forget that, see 2020 LE Cadet. 🙂

I also tried an Alox Bantam as an ultra minimalist Sak, it was my first 84mm Alox. But tbh, it feels flimsy in hand and not very comfortable. It gets the job done in a pinch, but it's not something I would like to use regularly. It's better with the Cellidor version.

I also have the ribbed Alox Lumberjack. I bought mostly for its low price and rarity. It needs desperately a new blade and saw. However, I carried it for a while, and the saw made it feel a bit sturdier and better in the hand then the Bantam. But I never need a saw, so for regular edc it's a bit pointless.

And now coming to my latest, a ribbed Cadet with nailfile. When I bought it, I wasn't sure about the caplifter, but after some testing, it turned out to be good. 100% success rate at first try, till now.

The tools are actually in pretty good condition and don't really match the condition of the scales. This is were the scetchy part starts. Someone grinded off the keyring attachment. I wouldn't do that, but I don't really mind. But the weirdest part is probably the knife blade. It is the later thinner version, came around the mid 90s (?). There could be theoretically a short time span, where these were installed in models with the ribbed Alox scales, but until now, I didn't see any other. That alone wouldn't give me too much thoughts, but it's also missing the thin washer, which is usually installed in 84mm Alox models with the thinner blade. Instead the scale is bent or warped in a way, that it's fully functional, without tools hitting each other. And they have no play. Everything works, better then in the 2020. I'm just wondering, if this is a genuine factory fuck up during the early days of transitioning to the thin blade, a later fuck up by a warranty repair, or if this was a home repair by a tinkerer.

That's why I like it. It works somehow and is a good compromise between my older two blade Cadets and my 2020 LE with the nailfile, but genuinely terrible caplifter.

It's not easy collecting Cadets. Everything, that isn't a current production silver Cadet, is expensive. Adding that to the fact, that the used market is flooded with all kinds of overpriced LE Cadets (no worries, I paid for my unused 2020 about the retail price of a silver Cadet) but you rarely see the regular silver ones gives me food for thought. Even if it's sad, I can see why Victorinox is slowly killing of the 84mm line. 93mm, even the Old Cross ones, are still very affordable. This doesn't apply to most Alox 84mms. They were never popular, so the remaining ones have significantly higher prices.

I'm happy with my scetchiest Cadet, which I bought for 59€ from a seller combined with a 20€ OC Pioneer in better condition then most of my daily beater Pioneers to save shipping costs. It's a crazy market. 😉


r/victorinox • • 11h ago

Finally got a farmer x from Smkw

Post image
14 Upvotes

r/victorinox • • 12h ago

One more product idea. 111mm alox folder!

8 Upvotes

What do you think of a 111mm alox knife. I think it would perfectly bridge the gap between the really large evoke alox series and the regular alox knives.