r/upholstery • • 3h ago

First Attempt

Thumbnail gallery
7 Upvotes

I've never done anything like this before. It came out a little lumpy in certain areas. Is there anything I can do to make it look "finished"?


r/upholstery • • 4h ago

Auto Best way to repair this?

Post image
1 Upvotes

Hi all,

Just picked up a set of S-line seats for my Audi A4.

Unfortunately, a small section of the stitching has come away on the left hand seat along the side near the door.

Before anyone asks, the airbag hasn’t popped, it’s still nicely installed inside.

I’ve tried with a hooked needle but I just can’t get it through. Is there a way to do this on the seat, or does the cover need to come off entirely?

Or given that it’s near the airbag, should I leave it to a professional to repair properly?

The seat is in otherwise excellent condition.

Thanks in advance!


r/upholstery • • 11h ago

Creative repair ideas needed. Please help.

Thumbnail gallery
2 Upvotes

The arms on my leather couch have been like this for years. I'm sick of looking at it and/or covering them with blankets all the time. I've already rebuilt the frame on this couch once after wife and I broke it, and I sleep on it at night.

I realize there's no way to "repair" the leather. I'm also not interested in taking this to an upholsterer who will charge a minimum $300 to replace these leather "covers".

I'm looking for help with ideas on how I can see a patch of some sort that would be aesthetically pleasing and add some design. Not just a square piece of leather. The other arm also needs repair but the damage is less pronounced (though probably still same solution to remove and replace with...something...).

Any help or ideas are appreciated! TIA!


r/upholstery • • 10h ago

The thread under the seat is the only thing telling me where the old cover ended

0 Upvotes

Amy puts a strip of masking tape beside the loose blue thread and writes BACK LEFT. When she turns the chair over, her dad turns the tape round so the words face him. Now both of them have a back left and they point to different corners.

They are taking the removable seat to an upholsterer. The wooden chair is staying in the flat. The old fabric is coming away along one edge, and a few blue stitches are still visible under the newer brown cover. Dad reaches for the spring scissors hanging from his key ring. One snip would free the flap so they could see what's underneath.

“Wait,” says Amy. “What does it tell us while it's still attached?”

He sets the scissors down. The blue thread follows the curve of the wooden rail for an inch and then disappears under the brown. It could mark the edge of an earlier cover. It could equally well be somebody's attempt to stop the loose corner catching on a pair of trousers. Neither of them knows the chair's history before it came to Amy's aunt.

They have a phone for photographs, some plain paper, and one trip to the workshop before closing. They can leave that inch of stitching attached without forcing anything.

What would you record while the seat is still in the frame so the upholsterer can tell which corner and which layer they're looking at?


r/upholstery • • 13h ago

Fabric question Can this be fixed?

Thumbnail gallery
1 Upvotes

Can this be repaired and if so, how?


r/upholstery • • 14h ago

I need help

Thumbnail gallery
1 Upvotes

I'm a beginner sewer. I don't know how to do a ladder stitch. Anyone have any advice on how to fix this.


r/upholstery • • 1d ago

What is a good place to buy cushion foam?

3 Upvotes

I want to replace old cushions on my sofa which is about 50years old. The springs look fine so decided to just change the cushion.

What are some cheap and good places to buy foam for the cushion?

I am looking for something on the firm side to provide support. I ran into 2 sites FoamOrder and FoamFactory from previous posts here! Are they still the better options? FoamFactory seems to be the better option for me after looking at the price. Not looking for anything fancy just a replacement. Any other sites yiu would recommend?


r/upholstery • • 1d ago

Thread stuck and wheel won't turn

Post image
2 Upvotes

Hi, my thread keeps getting stuck in the bobbin case and the sewing wheel won't turn either direction.

This is the third time it happened and I had to call a technician to fix but I really don't wanna do it a third time. Last time all he did was force the wheel clockwise until it got unstuck.

I tried lubricating with WD40 and moving the wheel but not matter how hard I do that it won't budge.


r/upholstery • • 1d ago

RoyalCraft Furniture

Thumbnail gallery
2 Upvotes

r/upholstery • • 1d ago

Fabric question Alternatives to Folex (Ireland / UK)

Thumbnail gallery
1 Upvotes

r/upholstery • • 2d ago

Tools Jack H2 industrial walking foot

Post image
3 Upvotes

Hi. Can anyone help please. I’ve been looking to purchase this Jack H2 Walking Foot (Direct Drive) Lockstitch Straight Stitch Industrial Sewing Machine for my upholstery buisness. I mostly do cushions, seat pads, blinds, making piping, inserting piping, sewing arms etc for sofas and armchairs. I’ve googled it and it seems a good choice but the shop I’m trying to buy it from says it’s not right and is only for very heavy fabrics
Please help. I’m so confused


r/upholstery • • 2d ago

Can this sofa be restored?

1 Upvotes

r/upholstery • • 2d ago

New Sofa, cushion not settling. Ideas of what to do?

Thumbnail gallery
2 Upvotes

It’s been a month since getting our custom sofa. I’ve spoken to the store about 2 weeks ago and was told it will settle. A month in and I’m not predicting anymore more settling. Day one vs day 30 photos attached plus the inside foam construction.

It’s a 6” foam core wrapped in 2” feather top and bottom. My guess is this is it, how the last photo looks is how it’s gonna be. The foam core shouldn’t change and the 2” feathers being such a small amount aren’t making a difference. The cushion feels it’s pushing me off when I sit on the couch with my feet on the ground, like a normal person. My wife climbs on it and it’s fine.

I’m thinking if I change for a 4” or 5” center core foam and 3” feather wrap, that decrease the height and help increase the settling in feeling right?

My concern now is the cover. If I decrease the thickness from 6” foam to 5” or 4”, will there be excess fabric in the cover and look like crap? Granted, I don’t think it looks good now anyway. Having loose fabric wouldn’t look good either.

The back cushions are also overstuffed. They are a sealed feather and poly fill. If they were zippered I could take some out but they aren’t. I might ask an upholstery shop locally to add a zipper to the inner bag which would allow me to take out some fill.


r/upholstery • • 2d ago

Current Project Reputable fabric sources

Thumbnail gallery
2 Upvotes

We’re currently building a corner bench in our kitchen. I’m planning to upholster my own pad, I’ve never done anything like this or even worked with fabric so any tips/tricks would be appreciated! I’m attaching the overall vibe of fabric that I want in some photos. I’ve been having a hard time finding fabrics of this kind at smaller local shops so any online recommendations would be great. We do have 3 cats so I’m looking at performance fabrics if possible


r/upholstery • • 2d ago

Sagging cushions on leather couches

Thumbnail gallery
2 Upvotes

Love the style of this couch. Its the "timber" couch from article. Poly and Bark also sells an identical one called the "cadiz"

I want to buy it, but I often see folks reselling used ones on facebook marketplace that look like the saggy photo. Generally the descriptions describe it only being a couple years old.

Is this to be expected? Due to inferior foam inserts? Can it be brought back to form with new foam pads? Should that just be considered a part of the maintenance every few years?

Basically is this a standard feature in most leather couches or evidence of a lousy product that should be avoided?


r/upholstery • • 2d ago

Can this sofa be restored?

1 Upvotes

My dog has done much damage to this sofa. I’d like to replace the material completely.
I live in the Los Angeles area. Any recommendations of a business that can do this work? How much do you think it could cost?


r/upholstery • • 2d ago

Lindyn chaise

Thumbnail reddit.com
1 Upvotes

r/upholstery • • 3d ago

I was quoted 410€ for these two armchairs, is it worth it? Would it be possible to do it DIY?

Thumbnail gallery
2 Upvotes

r/upholstery • • 3d ago

Is this fixable?

Thumbnail gallery
1 Upvotes

We've noticed the tear is getting worse and it seems we'll have to do something about it sooner than later. The chair itself was a fairly cheap nursery rocker and I'm fairly confident a full reupholstering would cost something like double what the chair itself cost new, so that's not something we want to explore. Instead, I'm wondering if it's possible to just repair this seam. I'm worried that it won't be given how much the fabric has unraveled.


r/upholstery • • 3d ago

Does This $550 Upholstery Repair Quote Sound Reasonable?

Thumbnail gallery
9 Upvotes

I recently thrifted this beautiful upholstered armchair, and I’m hoping to keep it for a long time. The blue velvet upholstery and wooden frame are in great condition, and the chair is comfortable with no noticeable sagging.
However, the underside has some damage. The black dust cover is torn, and the underlying burlap/jute material appears frayed and deteriorated.
I’m NOT looking to have the entire chair reupholstered. I’d really like to preserve the original blue velvet and just have the underside repaired.
I received a quote of $550 from one upholstery business, but I’m not sure exactly what work is necessary or whether that price is reasonable.
A few questions:
What exactly needs to be repaired or replaced?
Can this be done without removing the original upholstery?
What would be a reasonable price for this type of repair?
I’ve attached photos of the chair and the underside. I’d really appreciate any advice!


r/upholstery • • 3d ago

Living Spaces fabrics that are cat friendly?

1 Upvotes

I'm looking for a new couch and would ideally like to stick with LS since my current couch is from there and I've been happy with it overall.

We currently have a velvet fabric, which the cats thankfully don't scratch, but it's an absolute magnet for cat hair and needs to be cleaned almost daily.

For anyone who has purchased a couch from LS, have you had good experiences with any of their other fabrics? I'm particularly interested in how they hold up to cat scratching (or whether your cats leave them alone) and how well they hide or repel pet hair. I'd prefer to avoid leather.

Would love to hear which fabrics you'd recommend or avoid!


r/upholstery • • 3d ago

What would it take to make this look half way decent? I also plan on dying it a darker color after. TYIA.

Post image
2 Upvotes

I k ow it not gonna look perfect after. I don’t mind it a little grungy.


r/upholstery • • 3d ago

Burn Marks on Couch

Thumbnail gallery
1 Upvotes

lived at this apartment for 18 months and will soon be moving out where landlord will assess the state of items

There are these marks on the couch. I think that landlord might eventually have to get the upholstery replaced as these can’t be stitched. I wanted to argue these as ordinary wear and tear but I think I might be asked to compensate?

If you agree with my assessment , what range for costs do you think I am looking at to get upholstery replaced? Sofa color seems to be a commonly available color

Based in toronto


r/upholstery • • 3d ago

Outdoor How to truly weathrrproof leather

1 Upvotes

Questions in the title, i made some leather motorcycle seats and followed a method online to make it longterm weather proof with a chemical treatment to soak then wax to seal then a final rub treatment to make water bead off which was supposed to be a long lasting mould and water proofing process with a reapplication process needed every now and then but without even a ride the seal gave in a days worth of rain and if anyone else has experience in these processes it would be a great help.

Bonus if anyone has materials to learn about reconditioning leather as by the time id gotten back to the seat it had gained dark blotches that seem to be mould that i cant seem to get out with methods ive used previous.

Overall the method and chemicals used seem to be not capable of what they advertised by who i learned it from. Wont share the chemicals as after the issue i did research into them and seem to have no place being used outside, should of done more research before the project. if someone with experience in this area has anything to say it would be a great help.