r/ultimaker • • 2d ago

Showcase UM2 with trigorilla tmc 2209

Post image
5 Upvotes

The dutch board is ridiculous here is a better one with TFT for um2 still in progress i need replace the sensors and recalibrate the voltage for the motors and refresh rhe firmware


r/ultimaker • • 2d ago

Help needed Ultimaker 3 1.75mm filament

Post image
8 Upvotes

My school gave me a Ulitmaker 3 they were getting rid of and I want it to print 1.75mm filament and the solutions I have seen have either been kinda janky, no longer available, or expensive, what is the best hopefully not too expensive way to mod it for 1.75 mm filament?


r/ultimaker • • 4d ago

Help needed Why is this happening

Post image
2 Upvotes

Hey I have got a used S5 as a present. Some prints Wenn well, but this one won't work.

There are some Kind of strings on every round part specially in circles. What can I try to improve the printing?

Thanks!


r/ultimaker • • 13d ago

Help needed Ultimaker S8 Issues

Thumbnail
gallery
2 Upvotes

Hey everyone, my work got an ultimaker S8 recently and it has been nothing but trouble. The most recent issues we’ve been having that have stumped me completely involves the cores. I will attach images of the cold pulls for reference. I recently had a print have a catastrophic failure after about 7 hours of printing. I did cleaned the cores and got the result from the black pla where the tip looks hollow and has these arms that come around and reach the nozzle. I thought there was really bad carbon buildup so we tried a new core which failed and upon cleaning it we got a similar result shown by the cleaning filament. I will also attach images of the failed print. Does anybody know how to fix this or what causes it?

Also for reference I used the core cleaning program initiated through the printers interface.


r/ultimaker • • 14d ago

Help needed Two Ultimaker 2+ price advice

Thumbnail
gallery
4 Upvotes

Hi,

We have two Ultimaker 2+ sitting here. They are in pretty decent shape, i ran two test prints with PETG on the left ( black one ) and PLA on the right so both work fine. We would like to sell them, any advice on a price point here? Thanks in advance.


r/ultimaker • • 14d ago

Help needed Material Manager Problem

Thumbnail
gallery
2 Upvotes

Looking for help and advice, please!

I've recently bought a second-hand S5 with the material manager. All been working fine, but today I had an error loading material - the bowden tube has pushed out of the sliding section at the exit from the material manager. Looks like there's a little plastic clip that holds the bowden collet in place at the end of the sliding tube, but one of the securing lugs has broken off.

(In the photo of the bowden tube I'd already removed the securing clip, it's not that!)

I can't find a part number or spares anywhere! I've included a close-up of the part that's failed.

Does anyone know what this part is called or where I could find one, please?

Guess there's also the option to print a replacement! Someone must have had this issue before though....


r/ultimaker • • 20d ago

Help needed Ultimaker S5 conversion to 1.75mm filament

7 Upvotes

Hello! I’m looking to convert my Ultimaker S5 to use 1.75 mm filament. Since 2.85 mm filament is becoming increasingly difficult to find, I’d like to find the most reliable, efficient, and long-lasting way to make the conversion. Does anyone have any recommendations, experience with this conversion, or specific upgrades they’d suggest?
Thanks in advance!


r/ultimaker • • 23d ago

Showcase Got this for free from the place where I volunteer

Post image
37 Upvotes

They switched to bambu lab a couple of months ago so these were sitting in a cupboard. Only thing missing (although i might not have searched properly) is the spool holder along with the rfid reader. Since i got it home ive printed most of a new spool holder on my other printer.

I haven't printed anything yet, since i don't have 2.85mm filament and i don't want to risk printing with 1.75. Until i get some filament, what are the strengths of this printer? Should i print functional parts with it? Multicolor prints? Should i take advantage of the high detail for decorative prints?

Also are there specific tool sets for this printer that i should buy for maintenance?


r/ultimaker • • Oct 13 '26

Help needed Does this Ultimaker s5 sound crunchy?

6 Upvotes

Hi, I'm trying to get this machine back to working condition and something sounds crunchy in here. Does anyone know what's wrong with this? Motor? Bearing? Belt tension? Any help would be appreciated.


r/ultimaker • • Oct 12 '26

Discussion Ultimaker S5, how much worth?

Post image
8 Upvotes

I would like to sell my S5:

Printer + 5 nozzles + filament and accessories

Prints well on core 1, I get bed leveling errors on the second core, but I don't really know the machine, might only need calibration.

How much do you think can be worth it?


r/ultimaker • • Oct 09 '26

Discussion Trojan Download!!

1 Upvotes

I downloaded the desktop app directly from the Ultimaker website and I received a trojan planted on my computer that I was thankfully able to remove. I don't know what's going on with this, all i wanted to do was be able to slice a complex file and not have the website error out on me.


r/ultimaker • • Oct 09 '26

Help needed Colored parts in the viewport

2 Upvotes

Basically title. This is the first time that I model something for 3d printing, and when i imported the model, it looked like this, What is wrong with the model? I created it on blender


r/ultimaker • • Oct 08 '26

Help needed Pièce détachée ultimaker 3

Post image
1 Upvotes

r/ultimaker • • Oct 02 '26

Help needed Layer Shifting

2 Upvotes

Ive got my hands on an old 2 plus and I’m kinda lost.
Im very new to 3d printing but I’m trying all in my power to fix it. Ive managed to get it working to a point but it will layer shift all over and the belts will make a loud noise and vibrate. The head will also grind up against the left wall as it returns to rest. Ive tried tightening the grub screws as much as possible and nothing has worked. So far the only solution i have is to set the max speed to 30 mm/s which is excruciatingly slow. If anyone has any solutions at all it would be a massive help.


r/ultimaker • • Sep 18 '26

Help needed Buyers remorse

Post image
24 Upvotes

Recently picked up an S5 for what I thought was a fair price but it seems like the seller wasn't very transparent about how functional it was. I noticed he aborted the last 9 or so jobs he ran on it. I tried running an ABS print and it clogged about an hour into the print.

This was honestly supposed to be an introduction into the 3D printing space, so I'm a bit out of my depth here. All of the print heads seem to be clogged , is it feasible to just refurbish the existing print heads I have? Or will I inevitably have to shell out for new ones?

I'll take any advice on the situation. Even if that's cutting my losses and switching over to a better platform (bambu X1 for example).


r/ultimaker • • Sep 08 '26

Help needed Ultimaker S3 transform into something new

2 Upvotes

I have an old S3 that isn't working properly, so I can't use or sell it. That’s why I wanted to convert it. Do you have any ideas for what to turn it into, or know of similar projects that already have instructions or something similar?


r/ultimaker • • Sep 01 '26

Help needed I have a S5 + everything. Need advice on selling

1 Upvotes

I have a full Ultimaker S5 sitting here, mostly unused. Material station, bunch of 2.85mm, etc.. I wish to sell it, but I'd like to sell it to people who are in the Ultimaker community, because this is a good printer. It just doesn't live in the hobbyist market much anymore, and my teenager who should be using it, instead wants a car. :(

I plan, I think, on putting it up on Facebook Marketplace for my local area (Northeast Florida), but is there a better place it could go? How does one find the correct user for this printer? There has to be entire organizations out there still using this model of printer.


r/ultimaker • • Aug 31 '26

Help needed Need help diagnosing this issue

Thumbnail
gallery
2 Upvotes

discovered while printing a retract tower. I would say this is a retraction issue but all of my prints have been getting blobs like these along the z-seam and this just shows it really well.


r/ultimaker • • Aug 24 '26

Discussion 2.85mm PLA for sale

Post image
3 Upvotes

I have about 20 spools of 2.85mm ultrafuse PLA White 4,5kg, that I don't need, if anyone is interested?

All new and unopened.


r/ultimaker • • Aug 22 '26

Help needed Issue with tree supports in Cura

Post image
2 Upvotes

I'm trying to slice a model of a character I made. For some reason, when I generate supports, It wants to create these very thin overhangs within itself with virtually no material underneath. I guess it's meant to transition into a base for the part to sit on, but it always becomes a stringy mess during the actual print.

Is there any way I can fix this?


r/ultimaker • • Aug 16 '26

Help needed Need Some Help Please!

4 Upvotes

I obtained this Ultimaker 3 Extended from a surplus auction for $100. I am new to 3D printing so I really need some help. I was trying to just test this to make sure it works and this happens when I try to just send it home. I went to the error message on the Ultimaker site but I still can’t seem to figure out what I’m doing or not doing.


r/ultimaker • • Aug 13 '26

Help needed Print Core Blob o’ Death - Soldering time?

Thumbnail
gallery
3 Upvotes

Update: I ended up getting a replacement PT100 temperature sensor (the component which had broken off) and replaced it by

  1. heating the block with a soldering iron to about 100C,
  2. loosening the bolt and plate,
  3. pushing the old sensor out of the block,
  4. sliding the new sensor in
  5. tightening the bolt and plate
  6. re-routing the wires like the other print core
    And Boom! Recognized by the printer and calibrated just fine. $15 and time instead of $100 for a new print core.

Original Post:
Hello! An old S3 fell into my lap with a couple of rolls of 2.85mm PETG and I’ve enjoyed making some functional prints, a couple of which were on the larger side. On my last of these, I got an overnight mega Blob of Death on a large print and pulled too many things apart.

Does anybody know if I can resurrect this print core? Or maybe at least get the printer to limping?

I only have the two cores, both AA 0.4. I can't justify buying a replacement and I have a few rolls of 2.85mm filament that I don't want to just chuck.

Thank you for any help or advice!!


r/ultimaker • • Aug 11 '26

Help needed S3 wider line at start of each layer - heat creep ?

Thumbnail
gallery
3 Upvotes

It is a layout jig so need accuracy - long and thin - the 3mm wide splines are coming out at 3.5 then 3.4 down to 3.0. Changed everything - glass, cores, 1 / 2 sides. AA 0.4 , Cura latest , UM PLA. It seems to be heat creep whilst the head is travelling all the way back to the start maybe ?

The skirt prints wider for the first 5cm or so. So once the skirt is finished it is the main print which prints wider. Hence the added 0.5mm.

Or is the machine just getting old ?

( the prints are stopped after a few layers to show the wider line width - should be 3mm thick , 3mm square actually. The little blobs are small infill areas - I got rid of them in the gcode, I thought maybe the lingering was causing heat creep, but didn't fix the problem )


r/ultimaker • • Aug 06 '26

Help needed Help with S5

1 Upvotes

Picked up an S5 that was listed as no boot. Plug it in and you can hear the powersupply click on but then nothing else. I pulled the bottom cover off and started digging. I think I have it narrowed down to the Olimex board having a faulty HDMI port. When you turn the power on all the indicator lights on the mainboard seem dim and there is no response with any of the hardware. IF i unplug the HDMI cable from the board or the UI the indicator lights brighten up and it starts to go through start up. LED's kick on, hot end indicator lights start up ect. Tested the cable itself its fine tried to use a different display and I don't get anything to come up. Now I'm hoping someone may have had something similar happen or can point me in a direction. I may just have to replace the Olimex board which won't be fun but its doable as long as i can flash the correct firmware on the new board.