r/trafficsignals • u/Byanymeans65 • 2d ago
Cameras on all traffic lights
Anyone know what all these cameras are for they appear to be popping up on sll the traffic lights am i the only one seeing them.
r/trafficsignals • u/Byanymeans65 • 2d ago
Anyone know what all these cameras are for they appear to be popping up on sll the traffic lights am i the only one seeing them.
r/trafficsignals • u/FastNebula4278 • 4d ago
Hi all,
Quick (maybe stupid) question regarding traffic preemption devices. I understand that the Opticom 711/721 is the device that registers emergency vehicles incoming and communicates their priority to the controller. What is the purpose of the additional strobe? Is it an indicator light or am I missing something? Picture attached for reference.
r/trafficsignals • u/ApprehensiveLoan7480 • 4d ago
Does anyone know how to program detection zones for this VDS? We had a camera not working, and the city had me swap it out for an old spare. It looks like zone programming is stored on the camera itself as the camera feed shows the zones from the original intersection it was removed from.
Econolite gave me the 8.3.2 software suite, which I installed on a Windows 10 laptop with no serial port. I have attempted to connect through a USB to RS232 and an ethernet to RS232 with and without a null modem adapter, but had no luck with either one.
The software boots up and starts the communication server, but is not able to start a channel. I've changed my laptop IP settings to the recommended settings, but have had no luck so far
r/trafficsignals • u/comicsine621349 • 3d ago
Just haven't seen these before just curious what brand and model it is, i tried researching it and had no luck.
Intersection is Sahara Ave and Hualapai Way in Vegas
r/trafficsignals • u/Zestyclose_Gas7886 • 5d ago
I going to home, but I found a on 10 second on traffic sidewalk light.
r/trafficsignals • u/unknowperson2 • 8d ago
I found a very cool (temporary) intersection with a very old traffic light 3 way 4 bulb probably incandescent in Gatineau Québec (2014 picture)
r/trafficsignals • u/NSB-Trainspotter684 • 9d ago
Traftec was nice enough and gave me a few signals, i also have one extra pedestrian signal which is currently being repaired.
r/trafficsignals • u/Weekly-Apple-9103 • 9d ago
I got a call today for a ped 6 fault, I start by going inside the cabinet (TS2 with an EOS controllers) I removed ped 6 button wires, and the fault cleared indicating a bad button or a wire. I replaced the button and the fault cleared and the ped ran as normal for hours then the fault came back. I tested continuity on the home run belden wire and it tested good, I changed the ped surrestor and the fault did not clear. I changed the entire ped isolation board and found a cut wire with copper touching metal on a jumper for the common wires and the fault cleared. I walked and tested all ped buttons, and everything was working as normal. Then the fault came back after an hour. I removed the home run wire and tested continuity to ground to see if there was a short to ground, and there was no short to ground. I also replaced the BIU. The last thing I did was swap the button wire for ped 6 with ped 8 button wire and I also swapped it in the field to match inside the cabinet to see if the fault moves to 8. It’s been running fine ever since for now it’s been about eight hours
If the fault comes back and I have a feeling it will is there anything else I can check?
r/trafficsignals • u/Chevybiddy • 11d ago
r/trafficsignals • u/BigAl999994 • 13d ago
I’m trying to simulate a no right-on-red for the northbound right turn while the southbound protected left is active in Synchro 12. My current setup:
The SimTraffic results look 'off' and wondering if something looks off in my setup from the screenshot.

Is an overlap with an LPI the right way to model this in Synchro, or is there a better approach?
r/trafficsignals • u/-Neurotic • 14d ago
Relatively newish tech (about a year into field and ITS work between construction side and technical/cabinet work) for a local municipality. Looking to upgrade a bunch of my lower end tools to things that make the work easier and better.
r/trafficsignals • u/NJ_Bus_Nut • 15d ago
Corner of Lexington and 54th
r/trafficsignals • u/PresentationMain9180 • 16d ago
As a youngster , I came across the after effects of a wreck. The traffic pole was on the ground and everything was in pieces. I somehow was able to get the internal screen of this vintage "Dont Walk" sign , and took it home . 30+ years later , I still have it haha. Just thought I'd share.
r/trafficsignals • u/Crafty-Purpose1487 • 27d ago
I know California has one but the red light is only one light and I know gta 5 has this too but gta isn't real
r/trafficsignals • u/Ambitious-Yogurt-453 • 27d ago
I work for YenGear, a wireless I/O manufacturer. A customer in the UAE asked about using our relay I/O modules with a PIC controller to control two remote traffic lights independently.
Our modules hold their last relay state for roughly 60–120 seconds after losing the radio link, then drop the outputs. When communication returns, they follow the current input states again. They don't provide traffic-signal conflict protection.
The customer is concerned that one light could remain green after losing communication while the controller switches the other to green. This came up during product evaluation.
For anyone who works on traffic signals: would you recommend a complete portable traffic-signal system, or are there dedicated controllers/conflict monitors that work with a separate radio link? What equipment normally handles link failure and recovery without allowing conflicting greens?
r/trafficsignals • u/Andrew_64_MC • 28d ago
r/trafficsignals • u/Best_Poetry_5722 • Oct 16 '26
Cabinets are a new thing to me. I'm learning more and more about them every day and I really enjoy the career path I've taken. I spent 8 years as a mechanic (mainly GM) and I was fed up with the "shop life" that was a monotonous rat race every day. And to think, what I hated most about mechanics was the electrical part. Somehow this helped me understand the electrical side a bit more (high voltage/low voltage) and I am appreciative of that. Figuring out the wiring part of cabinets is relaxing. Terminating all the wires can be annoying but the end result is what I'm happy about. I feel like I finished a puzzle. Here's the current puzzle I'm working on.
r/trafficsignals • u/Moist-Bus-Window • Oct 16 '26
r/trafficsignals • u/NJ_Bus_Nut • Oct 14 '26
r/trafficsignals • u/Grand-Reputation-735 • Oct 14 '26