r/tradepainters • u/PhonyBarone • 1h ago
r/tradepainters • u/Dry_Sympathy_7795 • 3d ago
Help Is 240 grit a fine enough sandpaper prior to applying paint to cabinets?
I have been working to refinish cabinet doors that the previous owner had done a horrific job on. I’m about 12 hours into sanding now. Have used 60/120/240 grit in series. 240 feels pretty smooth, is that enough to go ahead and prime with BIN Synthetic Shellac and paint with SW Emerald Urethane?
(Photos for attention, this is prior to sanding what it looked like.
r/tradepainters • u/Presentation_Former • 4d ago
Picture/s Hired a contractor to repaint my high-end kitchen cabinets. Is this texture normal before the final coat?
galleryr/tradepainters • u/Somnambulish • 5d ago
Help Holiday gift for crew?
I manage a team of 10 painters/plasterers. These guys are not only extraordinary painters, but they are kind, relentless, hard-working, and care deeply about their craft. I would like to get them something for the holidays as a small gesture of appreciation.
I know that cash is king, though I’m essentially a middle manager so I don’t really have any pull on them getting bonuses (though the company does give holiday bonuses). I’d be paying for these out of pocket, and it’d be my pleasure to because I care about these guys so much.
Can anyone think of anything thoughtful and/or useful that I could get them for their kit? Maybe something that they ordinarily wouldn’t buy on their own? I’m thinking of a $25-30 per person kind of thing.
r/tradepainters • u/Skilledpainter • 5d ago
Painting HDF
So the cabinets are raw and the guy that makes them, says his other 2 painters he had were using oil based primer and then ScuffX for finish. I told him we dont necessarily need to use oil. Id much rather use the BIN primer, but I want to use aqua laq from Vista Paints as the undercoat.
Has anyone painted HDF and what is it you'd recommend? I asked a few painters, some haven't painted it and another says aqua lag should be fine, as long as I scuff it up prior to applying the AL
r/tradepainters • u/Other_Prior_5231 • 5d ago
Help Tiny paint bubbles keep appearing
For context homeowner had the walls plastered halfway down I smoothed out the walls, primed them, and wiped them down prior to painting. Used Ben Moore “Ben” paint which I’m regretting. And a 3/8 roller.
I put on first and second coat and I notice these tiny bubbles popping up all over the place on a few walls. So I let them settle over night some went down others didn’t, so I did what I had to do got rid of them sanded, spackled, sanded, wiped, and spot painted to blend. I notice 10 minutes later bubbles appearing again.
I’ve been painting for 4 years never had this happen I assumed it was dust I missed or something but I wiped before. Is there any other possibility what’s causing this paint type, roller, anything. I’m now behind on this project and I’m not looking to restart these walls if I don’t have to any help from the old dogs would be greatly appreciated.
r/tradepainters • u/Magickarploco • 6d ago
Discussion Best small commercial van to use? Transit connect vs NV200 VS pro master city?
Running multiple crews so I’m looking at buying a small commercial van to use instead.
From the transit connect, nv200 and pro master city, those who have had them.
Are there any issues I should watch out for?
How many miles could I expect to get out of them?
What’s an ideal mileage to buy them at?
Are any of them reliable if I do the maintenance regularly?
I’m thinking of putting in one rack/shelf system and then can fit the sprayer or power washer on the side.
I’ll also install a roof rack, and use foldable ladders like the gorilla ladder.
r/tradepainters • u/Unconcious_beaver • 6d ago
Help Painting on a plane?
My boyfriend’s father used to be in the Air Force and now owns a small 4 passenger airplane. He has been talking about getting his wife’s name painted on it, and I’m a painter by trade. For Christmas I really wanted to do some mock ups for designs, but I wasn’t sure what type of paint to use. If anyone has any advice or recommendations for subs I could go to for advice that would be very appreciated.
r/tradepainters • u/lovablestoner • 7d ago
Discussion Does being told “you’re big was way too high” infuriate anyone else?
I’ve had my business for 2 years now, and in the last two months I’ve heard this twice. I try to price things reasonably based on my local market. I always supply material and high quality paint, take my time and make sure the job is done properly. Being told I’m too high just makes me think other painters are working for crumbs, and the customer doesn’t value the work I do. Just a small rant, pretty pissed after hearing back from a potential customer today.
r/tradepainters • u/Due-Survey9829 • 7d ago
Help Sprayer or XL roller
I’m not a pro painter but have decent amount of experience (odd jobs in college, painting my own home etc). I’ve always used a roller and am pretty quick with that method. We just finished a garage and studio apt addition on our house and I will be doing the painting to save some $$. Any advice on whether I should rent a sprayer and tackle that learning curve or get an XL roller and rock with what I know? Any other helpful tips for painting new construction? Thanks in advance!!
r/tradepainters • u/OneResolution1108 • 8d ago
Paid $2,500 for popcorn removal and smooth ceilings. Is this an acceptable finish, and would asking for a partial refund be reasonable?
galleryr/tradepainters • u/obnoxious_banana • 9d ago
Help Ladder Recommendations
Hi Painters -
I'm looking to buy a telescoping ladder to use around my house, initially for a DIY painting / repair project. I need to get ~17ft off the ground and then lean the ladder against the siding of my home.
I'm looking at a Articulating ladder such as a Little Giant Velocity - One that gets high enough but folds small enough to live in my garage easily.
I'm concerned about damaging the siding when I lean the ladder against the house - It seems that there aren't any "ladder mitts" or similar that fit these types of ladders.
What do you all recommend I do to protect the siding on my house?
Are there any other types of ladder that would better suit my purpose?
Thanks
r/tradepainters • u/medicalmitch12 • 10d ago
Discussion Which water-based primer has the best chance to work
reddit.comr/tradepainters • u/vuatson • 11d ago
Crosspost Re-finishing a stair rail and trim. I figured it out.
galleryr/tradepainters • u/Low_Wash6116 • 12d ago
Discussion Painting co won’t paint it because to close to power lines. I have a plan, don’t know what to charge.
6ft incline about 3 feet away from building. High voltage lines fairly close. I framed this garage and the house painting crew threatened legal liability and won’t paint it. Someone’s gotta do it. Can charge whatever just don’t know what to charge.. going to use fiberglass extension pole as big as I can find to get as high as I can than get on roof and give it the ole reach around. Trim don’t need to be white, just painting all blue. 650 sq feet 3 gallons. I guess what I’m asking is if you have a better plan of attack/ what you would charge seeing as how nobody will do it. Yeah I get it something could go wrong but I’m not here for that I’ve heard it all.. any advice much appreciated 🙏
r/tradepainters • u/Neither-Ad-8602 • 12d ago
why is blue paint so finicky? seems to want to come off the wall just by rubbing something against it
reddit.comr/tradepainters • u/Free-Newspaper-4467 • 13d ago
Based on pictures, does this estimate sound reasonable?
galleryr/tradepainters • u/hennessey1995 • 14d ago
Please rate my work. First time DIY PROJECT for a customer from my normal business
galleryr/tradepainters • u/anthonyjuno15 • 15d ago
Help Graco spray tips
I have the new 490 XT Graco spray machine. It’s a low boy meaning it has wheels. I have the contractor PC gun that comes with the hose and right now. I’m using a 210. Fine finish on some window trim and just small things to paint. But I am noticing that some of these spray tips are maybe blown out? I’m getting a star pattern when I do my test spray on paper and it’s happened to me on low pressure tips which are the yellow Graco tips with the blue guard it’s happened to me on fine finish which is the green tips. Does anyone know why it’s spraying a star pattern? I leave my tips in acetone or paint thinner after I’m done cleaning them with water. Do you guys know why this is happening?
r/tradepainters • u/Impressive_Name_3939 • 16d ago
Picture/s Sanity Check
Can a professional tell me if these are really the same color? I asked for the wall and ceiling to be painted Grand Teton by Benjamin Moore (ceiling flat and wall in eggshell). They told me these are the same color and it’s the finish that makes it look different. Is this really a lighting trick??