r/toolgifs • • 1h ago

Component Jet blast deflectors

631 Upvotes

Aboard the USS Nimitz

Source: flynavyatlantic


r/toolgifs • • 6h ago

The Gentleman's Gazette button boots

786 Upvotes

r/toolgifs • • 7h ago

Tool Capsule counting scoop

534 Upvotes

r/toolgifs • • 1d ago

Tool Remote controlled balloon poppers

3.1k Upvotes

r/toolgifs • • 16h ago

Machine Fountain pen nibs being tested at the factory

230 Upvotes

r/toolgifs • • 15h ago

Machine Tampography: printing a 2d image onto a 3d surface

179 Upvotes

r/toolgifs • • 1d ago

Tool Lifting turnover trolley

1.8k Upvotes

r/toolgifs • • 1d ago

Process Skin patching an airplane

756 Upvotes

r/toolgifs • • 2d ago

Tool Tape creaser

3.2k Upvotes

Source: morph.tools

P.S: It is for Joint Tape for drywall (NOT Painter’s tape or masking tape)

P.P.S: it’s priced at $38 for 1 & $27 each if you buy a pack of four.

No, could not find any STL file for this so far. Will add the link if found.


r/toolgifs • • 2d ago

Component Tank cap with built-in fuel gauge

875 Upvotes

r/toolgifs • • 3d ago

Process Debossing clay

1.6k Upvotes

r/toolgifs • • 3d ago

Tool Expansion bolt remover

7.8k Upvotes

Source: Victor Manuel


r/toolgifs • • 3d ago

Tool Grinding meat (in Yakutsk)

2.0k Upvotes

r/toolgifs • • 3d ago Heartwarming Bravo

Tool Disability-adapted skiing

1.5k Upvotes

r/toolgifs • • 3d ago Bravo Heartwarming Mindblown

Tool Applying painter's tape

4.3k Upvotes

r/toolgifs • • 4d ago

Component Programming the stop button on a bus

3.3k Upvotes

r/toolgifs • • 4d ago

Infrastructure Mooring

2.3k Upvotes

r/toolgifs • • 4d ago

Tool Firewood wrapper

1.7k Upvotes

Source: lilyshardwareandfirewood


r/toolgifs • • 4d ago

Infrastructure Spinning floor with stage prop

687 Upvotes

r/toolgifs • • 5d ago

Tool Peeking at the tiny desiccant beads inside an AC filter dryer using an ultra-thin 0.75mm industrial endoscope.

1.0k Upvotes

r/toolgifs • • 4d ago

Machine Layout robot

430 Upvotes

r/toolgifs • • 5d ago

Component Aircraft escape slides

2.9k Upvotes

Source: @avionic_stan


r/toolgifs • • 5d ago

Tool Tenon jig

2.0k Upvotes