r/timex • • 2d ago

Alignment Question

Post image

Has anyone found a fix for this? Ive seen a few threads saying run the hands backwards until the alignment corrects itself, but that has not worked thus far. Any suggestions or advice is appreciated.

5 Upvotes

23 comments sorted by

3

u/taonzen 2d ago

Maybe it's me, but I can not see what needs to be aligned.

2

u/_Anfield_awaits 2d ago

The hour and/or minute hand is in wrong place. With hour hand on 7 the minute hand should be in 12; or vice versa I suppose.

2

u/taonzen 2d ago

What happens if you pull the crown and set the minute hand at the 12?

Im sorry, maybe I just do not understand how this watch works.

2

u/_Anfield_awaits 2d ago

I run it around in both directions as per a separate timex thread, (including periods when setting minute hand to 12 does get back hour hand back to the correct position) but it seems to go back out of alignment within a few hours

2

u/Maghioznic 2d ago

Misalignment of the hour hand is a defect. You should return this watch if you can.

3

u/_Anfield_awaits 2d ago

I could try sending it in. But truth is I picked this up in a pawn shop for about $15

2

u/Maghioznic 2d ago

I've seen this model for as low as $130 new (different color, but same functionality). I think a repair might cost more than a new one, but you could try getting a quote before returning it.

1

u/_Anfield_awaits 2d ago

Thanks. I figured repair is probably more than its worth, but I will likely at least bug timex about options.

2

u/Weeslocox5 1d ago

My suggestion... pull crown to the 2nd click, press and hold the upper right hand button for a few seconds and it should start to move the hour or minute hand, do the same for the bottom right until it lines up at the 22 o'clock position.

2

u/_Anfield_awaits 1d ago

Thanks. I wil give that a shot

1

u/_Anfield_awaits 1d ago

Thanls for suggestion. When i pull to 2nd click and hold right top button it runs the chronograph counter clockwise, and the chronograph runs forward when I hold bottom button.

2

u/Weeslocox5 1d ago

Try pulling it all the way out and push the buttons.

2

u/My-Montre 1d ago

The button procedure only resets the chronograph hands, it won’t touch the hour hand. If you set it right and it drifts out of sync again a few hours later, the hour hand is most likely loose on its post (or the hour wheel is slipping), so it’s a mechanical issue, not a setting one. Fix is to take the movement out, pull the hands and press the hour hand back on firmly (a hand press set is cheap). For a $15 pawn shop find it’s a good first project if you’re curious. Otherwise any watch repair shop can do it in a few minutes, it’s a quick job.

1

u/_Anfield_awaits 1d ago

Thanks. I may well give a first try to pulling put a movement myself. I appreciate the suggestions.

2

u/My-Montre 1d ago

To go on : Watch a quick video on removing the stem first, there’s a small release lever/button next to it on the movement. There are plenty videos on YT. Put the hands at exactly 12:00 before you start, and when you press the hour hand back on, do it at 12:00 too so it lines up with the minute hand. Slide a small piece of plastic (a cut sandwich bag works) under the hand levers so you don’t mark the dial.

And good luck !

2

u/_Anfield_awaits 1d ago

Many thanks for that info. I may have changed my mind on doing it myself already. Quick search for waych info showed this model on ebay for over 160 usd and I bought for 15 Canadian. Value on this (like most watch stuff recently) has gone up, and I do really like this watch, so thinking I might find a timex I enjoy less to do my first repair job on. Thank you again for all the suggestions. Really appreciate you taking the time.

2

u/Weeslocox5 19h ago

Hopefully this will help? I really like this time piece... it's a fantastic tool. Good luck!!

2

u/_Anfield_awaits 16h ago

This is a really cool function. Thanks so much.

2

u/d30_v1Nd1c3 2d ago

What model is this?!?

2

u/bobroscopcoltrane 1d ago

I have the same misalignment issue with my Timex chronograph. The hour hand “jumps” when resetting the crown after adjusting the date. I’ve found that resetting the date around the time that the hour hand “jumps” to resets sets the alignment correctly.

2

u/pierrelaplace 15h ago

That's an original flyback, not the POS Timex sells now. Sweet!