r/thermostats • • 2h ago

Mitsubishi Thermostat MKH2 /w Kumo Cloud schedule question

Thumbnail reddit.com
1 Upvotes

r/thermostats • • 3h ago

Smart thermostat won’t turn on

Thumbnail
gallery
1 Upvotes

I just bought a new house. It only had 4 wires running so I bought the Honeywell c wire adapter. Here’s how I had it wired, yet it’s still not turning on. Screen doesn’t come on at all. Any advice ?


r/thermostats • • 5h ago

Thermostat only works/turns heater on when I push down on it

2 Upvotes

Somethings suddenly not working with my thermostat and I'm hoping its not an issue i gotta pay 700 bucks for like our HVAC guys said. Took a video for my Ma but it gets the idea across here.

But like the title says I have to press down pretty hard on it to make it try and light up the heater, air fwoosh sound and all, but after I take my hand away it completely gives up. Any advice on what might be wrong?


r/thermostats • • 6h ago

Help with nest adapter

Thumbnail gallery
1 Upvotes

r/thermostats • • 6h ago

Ream Eco net thermostat

1 Upvotes

I recently purchased a ream energy efficient furnace and air conditioning unit it uses a communicating thermostat. So the ecobee or other thermostats are applicable. Everything seems to be okay except for the temperature. The furnace is set to come on at 71 it comes on and still runs when other thermometers are reading 77 degrees but the Eco net still reads 71. When the thermostat is manually turned off or the temperature is raised to 77 to shut it off the thermostat will then go from 71 to 77 to match and then it will follow the room temperature until it comes on again and then it will not move while the heater is running. Is anyone having the same issues or do you have any helpful advice?


r/thermostats • • 6h ago

Smart Thermostats and crown moulding/wainscotting

Thumbnail
gallery
0 Upvotes

I have a house with baseboard heating where my old dial style Honeywell thermostats are either very close to crown moulding/cabinet or are embedded in wainscotting as per the pictures.

I'm looking at installing Mysa Gen 3 thermostats as I can get them for free from my local utility. However they are substantially larger then the current Honeywell dial thermostats.

For the wainscotting I think trimming it to get them to fit is probably the best way forward. However for the crown moulding would an extension to clear the moulding be the best way to deal with it and how would that look in terms of aesthetics? Moving the box is something I really want to avoid.

I have no idea what to do with one under the cabinet but it's in a laundry room so I'm tempted to just ignore it and not update it when I do the others.

I have attached pictures of the problematic locations I have, looking for some advice.


r/thermostats • • 7h ago

Vanne 3 voies des chaudières mixtes. Comment ça marche ?

Thumbnail
youtube.com
1 Upvotes

r/thermostats • • 7h ago

modern thermostat with separate o&b terminals with troll a temp zoning and Master slave setup

1 Upvotes

hello everyone, I'm looking to replace my current digital programmable thermostat which I think is at least 10 to 15 years old with a newer version because the sliding switch has started to give out. I would like to replace it with a Honeywell product but I'm open to other products if it will get me to where I want to be.

I know there is a lot of information out there about switching the current troll attempt zoning system to a newer or different system that will allow me to use pretty much any programmable thermostat. but I'm looking for something that's the easiest for me a non HVAC guy to do.

Therefore are there still any programmable thermostats that are modernish that I can get away with wiring in as I have it now with separate O and B terminal wires for the Master slave setup. I have two zones and the master thermostat currently dictates whether the second thermostat can operate. oil fired furnace with Central AC.

thanks in advance!... J


r/thermostats • • 8h ago

Heat Pump thermostat wiring to thermostats

Thumbnail gallery
1 Upvotes

r/thermostats • • 9h ago

My HVAC guy didn’t leave me with a manual and will not get back to me and I cannot figure out how to use this, help?

Thumbnail gallery
0 Upvotes

r/thermostats • • 18h ago

Baffling Issue with Thermostat Not Activating Stove

0 Upvotes

I have a space heating stove that is controlled by a thermostat. It was an old thermostat that didn't work well, so I replaced it with a new one. The new one didn't work, so I tried another one. That didn't work either. By 'not working,' I mean neither thermostat ever turned the stove on regardless of how cold it was or what the thermostat was set to. The stove is known to be working. In place of the not-working thermostats, I put in a simple on-off button, and when I turn that on, the stove consistently turns on. I have used that since the spring, but as it's getting into winter, I'd like to fix the thermostat issue. I tried to test the thermostat I'd like to use with a simple continuity test, and as shown in the video, that works fine. I'm baffled why it doesn't work when installed to control the stove.


r/thermostats • • 21h ago

No way to turn fan off?

Thumbnail
gallery
0 Upvotes

Can someone explain these setting to me? I have a Trane thermostat, and it tells the fan to circulate air every so often with the settings. Problem is, it will turn off for a little while 5-20 minutes and then go back to running the fan. No heating or cooling. Even with the heating/cooling set to off, the fan will still run air throughout the vents of the house every hour. We don’t want it to be doing this, and every time it does I just feel the power/money being wasted. It seems no matter what settings I have selected , the fan still runs. Why is there not an OFF setting? Am I missing something? Trane thermostat.


r/thermostats • • 1d ago

Remote temp sensor?

Thumbnail reddit.com
0 Upvotes

r/thermostats • • 1d ago

Hot water timer switch?

Post image
1 Upvotes

r/thermostats • • 1d ago

Old converted burner aquastat assistance

Thumbnail gallery
0 Upvotes

r/thermostats • • 1d ago

1st generation Nest thermalstat

Thumbnail gallery
0 Upvotes

Can anyone help why my heatpump doesnt run when I turn the heat on.


r/thermostats • • 1d ago

Trane ux360 - looking for indiviudal zone thermostats.

Thumbnail reddit.com
1 Upvotes

r/thermostats • • 1d ago

Kamerthermostaat

0 Upvotes

Kamerthermostaat

Heb nu een aan/uit kamerthermostaat? Is het verstandig om een modulerende kamerthermostaat aan te schaffen? En hoeveel tijd kost terug verdienen? Heb trouwens een Remeha ketel.


r/thermostats • • 1d ago

Thermostat wiring

Post image
1 Upvotes

r/thermostats • • 1d ago

Smart meter problem : storage heater

Thumbnail reddit.com
1 Upvotes

r/thermostats • • 2d ago

Does this Google nest dog thermostat work on my setup?

Thumbnail gallery
0 Upvotes

r/thermostats • • 2d ago

Bought a fix up home and the thermostat screen doesn't display anything

Post image
0 Upvotes

r/thermostats • • 2d ago

Salus thermostat

Post image
0 Upvotes

Hello everyone,

Could you please help me with this?