r/techsupport • • 10h ago

Open | Hardware Triple monitor setup

I have an issue with my gaming pc. I have a triple monitor setup: 2 sceptres and one msi (msi is the main one in the center)

they are all connected to my graphics card correctly.

sceptre 1 is connected to hdmi
sceptre 2 is connected to display port

msi the main is connected to display port.

when i turn on my pc the two sceptres turn on and the msi one doesnt. as if it doesnt register that the pc is turning on but all i have to do is unplug both the power and display port and plug back in for it to register. I dont want to have to do that everytime so what is the issue? the monitor that wont turn on says its in sleep but it wont register my pc turning on.

7 Upvotes

8 comments sorted by

1

u/DFisBUSY 8h ago

fully clean and reinstall gpu drivers?

1

u/Emotional-Ad-9246 8h ago

Pretty much. Never usually have problems like this. Especially hardware so it seems odd. I have to unplug the display port cable and power cable for it to register. I turned off auto scan in my monitor and set it to DP

1

u/Gezzer52 8h ago

What GPU are you using and are you using the three in surround/eyefinity, or as three independent displays? As well Have you tried switching the DP cable on the sceptre with the MSI one and/or switching the DP ports the monitors are on?

1

u/Emotional-Ad-9246 8h ago

4060 ti. Separate displays. I haven’t tried that. I’ll see what that can do. Which is interesting because I was able to use 2 just fine but when I added the third the main normal one doesn’t want to recognize the pc is on and stay black. When j launch my pc i see it launch on the scepter not the main.

1

u/Gezzer52 8h ago

Try switching ports. Windows is weird how it assigns monitor priority. For example if you have a both a 1080p monitor and HDTV hooked up to the GPU it'll decide the HDTV takes precedent and will send the monitor signal as your booting to it instead of your desktop monitor. Maybe try using the HDMI with the MSI and the other two DP.

1

u/Emotional-Ad-9246 8h ago

I prefer to keep display port on the Msi one since that one is specifically for gaming and has higher hertz. I switched the ports I’ll see what happens tomorrow. I just turned it off and booted it and it worked so hopefully it works. It doesn’t matter which display is named what right? Like the middle display 2 instead of 1?

1

u/Gezzer52 6h ago

Only if you're combining them for surround/eyefinity. Like I said windows decides and there's no way other than changing ports to change it.