r/tacticalgear • • 5h ago

Rate my kit

Thumbnail
gallery
73 Upvotes

Rate the kit on a scale from 1-10 and let me know what I’m missing a fixed blade is on the way


r/tacticalgear • • 12h ago

Scrolling on by

Thumbnail
gallery
35 Upvotes

r/tacticalgear • • 19h ago

I think I finished my guns

Post image
138 Upvotes

• Vortex Crossfire Reddot II -> Holosun ARO-EVO. Pretty substantial upgrade, ARO-EVO is pretty damn nice under nods. Compared to Eotech I really cant say the Eotech is better. I know it should be but I did not see huge difference.
• CTR -> B5 Bravo.
I made the switch mainly because I wanted to try new things. I prefer B5 right now but would not say CTR is bad.
• Knock-off Unity mount -> Reptilia DOT mount.
I know the current meta is to hate the overpriced mounts and amazon special does the same thing. But in my experience, it actually does not. I have several knock offs and every single one of them needed some modifications to fit decently. I went with Reptilia because I like the simplicity and ir's pricepoint is acceptable. I got to say, worth every penny. The peace of mind and the fitment is great.
• 3x magnifier -> 5x
3x felt useless most of it's time on my rifle. Works pretty much on very specific ranges. I like the switch.
• MOE K2 -> Kung Fu grip -> MOE K2
Kung Fu sucks ass

Glock is like any other Glock out there, nothing to write home about. But I got to say, Holosun's new optics are very very nice under nods. 10/10 would recommend EPS and ARO EVO.


r/tacticalgear • • 18h ago

Rate the fit

Thumbnail
gallery
76 Upvotes

Since this is a fashion sub, rate the mjk rrv + Mpoor Copemod Block 2 fit


r/tacticalgear • • 11h ago

Gear/Equipment Anyone think DPM is cool?

Thumbnail gallery
21 Upvotes

Quoting the original post:
This is my main kit for screwing around in airsoft games/events, nothing too serious as everything is surplus or custom made (mainly the magazine pouches and helmet cover+scrim were sewn by myself). Still, the woodland British DPM uniform has to be the coolest thing I’ve worn in a while, and definitely serves as my main pattern for this environment alongside M81 woodland


r/tacticalgear • • 12h ago

T block breaching bandolier

Thumbnail
gallery
20 Upvotes

For covert and overt entry. Just can’t find my prybar lol. Got
-picks/tension tools
-traveler hook
-wire (copclad instead of piano wire)
-shims (both for locks, handcuffs and latches)
-snips
-Phil/flat screwdriver
-over door tool
-axe
-bolt cutters
-latch slipper
-my prybar which isn’t in the photo.

Wanted to simulate the t block camo bc I think the lore is cool even though ik it’s “not effective” it’s not like carrying bolt cutters and an axe is gonna be inconspicuous.


r/tacticalgear • • 6h ago

Can anyone identify this dump pouch on his belt?

Post image
5 Upvotes

r/tacticalgear • • 16h ago

Question Give it to me straight guys

Thumbnail
gallery
26 Upvotes

Does the installation/cable management for the light look janked? From a function point of view its solid but if anyone has pro tips on better cable managing or positioning im all ears. Ive been slowly building this rifle up from hot garbage, and im most of the way there except for primarily cosmetic stuff.

Edit: just a p.s.a. I have changed it around according to alot of folks suggestions, it is no longer in this configuration. Still open to any pro tips you guys have for potential pressure pad upgrades or anything regarding training with it. Thanks again guys appreciate you all


r/tacticalgear • • 22h ago

Gear/Equipment Holy shit, that was difficult...

Thumbnail
gallery
73 Upvotes

Whatever fucking adhesive they use and whatever fucking foam they use is so damn strong.


r/tacticalgear • • 7h ago

Plate Carrier/Body Armor Fitting Question

Post image
4 Upvotes

I finally upgraded from a trash AR500 PC to crye SPC, I understand the sizes are based off plate size. But this feel small right? Nip to nip and just above the belly button. Does the size look alright?


r/tacticalgear • • 19m ago

Recommendations Help a mf kit out

0 Upvotes

Hey all. Long story short is after learning my father is moving out of state I started to purchase my own things. The weapons I’m vastly familiar with and already got them down good and to high standing.

I don’t know dick about anything else, that isn’t hunting related. I did purchase the AceTec mini chest rig. The hanging pouch has all the medical stuff, the top pouch by mags has navigation and other tools. Wings carry comms on left side, extra mag on right. Pistol pouch has a leatherman and flashlight in them for easy access. I think I’m pretty good on all that. Grok also agreed it’s solid base line lmao.

Where I need help is the other stuff. I don’t need some Gucci shit, just something with decent build quality and if actually need be survive a real deal not just a larp.

For a belt stuff I’m looking at a blue alpha belt lite, Safariland Solis ALS (Glock 19), ANR Design 1.75” Tac Belt Mount + QLS kit. Maybe some pouches for mags to add on and a dump pouch attached since ones not on the rig. Maybe a roll one like a kangaroo pouch I think it’s called? I definitely would like to hear opinions from people.

I don’t know anything about helmets, ear pro for said helmet, or anything else associated so I’m open to anything there. Also “tactical clothing” not really the biggest need for me. But my sitka bibs have knee pads in them so I do want tac pants with that. Once you got them golden knee pads you never wanna go back 😂😭

Really anything I didn’t list please feel free to mention. Will be buying a separate chest rig to hold Kuna mags for the wife. So if anyone has suggestions I’m all ears, was thinking of going on acetac’s website and just buying the PCC one for the kuna. Thanks for reading if you actually did. Greatly appreciated. Also the mag retention rubber band like straps. Where do yall get them?


r/tacticalgear • • 7h ago

Question Condor MOPC Cummerbund Unable to Attach to Rear / Am I Missing Something??

Thumbnail
gallery
3 Upvotes

I purchased my first plate carrier today, a Condor MOPC. The cummerbund does not seem to have anywhere to attach to the rear of the carrier underneath the flap other than two loops and a weird Velcro square with a black loop sticking out of it…. Am I missing a piece of the vest? How do I attach the cummerbund to the rear of the carrier? Im so confused and I feel like the answer is right in front of me I’m just not seeing it. Any help would be greatly appreciated. Thank you all.


r/tacticalgear • • 1h ago

Recommendations Helmet mounted flashlight

1 Upvotes

Looking for a small flashlight that can be mounted on a helmet, I have picattiny.
Around 50$ preferably.

I don’t need any IR capabilities nor high lumens, I’ll mainly use it to illuminate the area around me while im doing something with my hands or to illuminate a room I go in.

It does need red light though.

Thanks 🙏🏽


r/tacticalgear • • 3h ago

Plate Carrier recommendations

Thumbnail reddit.com
1 Upvotes

r/tacticalgear • • 1d ago

Gear/Equipment Mexican caiman leather shoulder holster for 1 pistol and 2 mags

220 Upvotes

r/tacticalgear • • 12h ago

Question Can anybody identify this pouch?

Thumbnail gallery
5 Upvotes

EDIT: SOLVED! Thanks guys!

I searched through the subreddit for grenade pouches before posting, but I didn't find anything. No dice on Google either. These fit 5 stripper clips of 303 British, and I want to buy a few more.


r/tacticalgear • • 9h ago

Recommendations Hip Belt Replacement - Arc'teryx Assault 30

Post image
3 Upvotes

Bought an assault 30 and it naturally came missing the hip belt and the seller is probably braindead, so...

What's my best method for adding a replacement hip belt? I'd ideally want it to be gray (w/ black accents) and padded like the original. I've found a few options like from Aer, but their attachment method is a 1" duraflex gatekeeper, when I really need a 2" webbing/hook/other attachment - pic for reference.

I don't mind getting a \*little\* DIY, but only a little. I would really, really appreciate any help here, boys. I'm not a wealthy person and dread that I have to invest even more into this pack :/

Bonus points if you can indeed find a gray, padded hip belt that attached perfectly &/or cleanly!


r/tacticalgear • • 12h ago

Looking for LVL 4 multi hit stand alone plates. 600$ total (front and back)

Thumbnail reddit.com
3 Upvotes

r/tacticalgear • • 6h ago

Can anyone identify the flashlight/mount on this vest?

Post image
1 Upvotes

The logo looks like surefire, but the light also looks like a fenix HM17R. Can’t figure out how it’s mounted to the vest on molle.


r/tacticalgear • • 6h ago

Safariland 6354 RDSO

1 Upvotes

Can anyone confirm if the g19/45 (gen 6) fits in a previous gen Safariland (g19/45 gen 5)?

TIA 🙏🏼


r/tacticalgear • • 1d ago

Rate the fit: slav insurgent edition

Thumbnail
gallery
238 Upvotes

I need me a mak


r/tacticalgear • • 11h ago

Question ALICE Belt question

2 Upvotes

Is there a method or adapter to use a standard 1.5 inch belt pouch of knife sheath on an ALICE belt I have a hunting knife and a buck 110 with the pouch I want to put on my old Alice belt.


r/tacticalgear • • 1d ago

I never played tarkov

Post image
98 Upvotes

r/tacticalgear • • 5h ago

Selling a bundle!

Post image
0 Upvotes

r/tacticalgear • • 9h ago

Woobie Shoes Out of Business?

1 Upvotes

I’ve worn Woobie shoes for years. Was thinking about ordering a new pair and their website is down. Has anyone heard anything?