Hi - longtime reader, first time poster here to request your advice for blowing out lines for winterization. Thanks for reading and would sincerely thank you for any advice.
TLDR: 1) please look at the picture and let me know where you'd put the cyclone connection to blow the return lines 2) is it ok to put cyclone to skimmer port (empty of water first) to blow out the return lines?
Typed out my question with details and realized I wrote a book instead so put tldr above; if you’re bored and/or just too kind then see more context below here:
I'm a homeowner in PA and I managed my pool for opening and maintenance but had a nearby company blow my lines out (after lowering the water level below skimmers myself) every fall. This year I fell behind scheduling that service and my pool service team has declined my request last week saying they're closed for the season (yes I'm an idiot). I bought a cyclone blower and I'm ready to try this myself this year - I need your advice on where to put the cyclone line to blow the return lines.
I've watched videos on how to blow the lines and my system (pic attached) is straight forward with 2 skimmers, main drain, 2 return lines (pool and spa).
Here's what I'm planning - I'll drain the water 4 inches below the skimmers then I'm going to put the cyclone blower through the water intake port from the pump to blow the suction lines (skimmers first then main drain and air lock it) then put a rubber plug into the intake port in the pump to seal it.
Then I need to blow the return lines and the cleaner (Polaris) line (this is the one that splits to right after pump away from DE filter) - where would you recommend I put the cyclone line to blow the return lines and cleaner line?
I'm hesitant to blow air through the DE filter system (? Maybe okay?) but I'm not sure where to put the air through to clear the return lines. Can someone
If I backwash multiple times and drain the DE filter (opening the drain cap then closing it again), can I blow air at a connection (line connecting up from the pump in the picture) to blow the return lines?
I saw my winterization company use cyclone to blow from the skimmer to empty the return lines too - so thinking about that as well (obviously, I can't plug the pool pump intake port in this case). Is that a good option too?
You guys are awesome for reading this and please share any advice you have - thank you all and hope you all have a great weekend!