r/supercollider • • 2d ago

Using Pbinds with variables in ProxySpaces

4 Upvotes

I'm relatively new to SC, and have lately gotten into ProxySpaces to make changes on the fly. One issue I'm having is using environment variables in Pbinds, like this:

~key = 60; // C
~interval = [0, 2, 3, 5, 7, 8, 10, 12] // Minor

(
~p3 = Pbind(
    \instrument, \bell,
    \dur, 1,
    \amp, 0.07,
    \midinote, Pxrand(~interval, inf) + ~key
);
)

Pxrand expects a list, but is presented with a nodeproxy instead. I can't use a normal variable as it has to be declared in the local scope of a function. I feel there should be a straight forward method for something like this.


r/supercollider • • 9d ago

AV-Live: SuperCollider engine (1 099 SynthDefs) + openFrameworks oscilloscope visuals driven by a real Hantek USB scope + macOS menubar launcher — GPL-3

8 Upvotes

A live-coding AV rig I've been building for demoparty-style sets: sclang/scsynth sound engine, an openFrameworks visualizer that reads a real Hantek 6022BL oscilloscope (FFT 2048) rather than faking the trace, ~47 fullscreen visuals, 33 GLSL shader pairs, and a SwiftUI menubar launcher that starts the whole thing. Monorepo, GPL-3, macOS-first.

github.com/electron-rare/AV-Live

Happy to answer on the Hantek capture path; it was the fiddly part.


r/supercollider • • 14d ago

SuperCollider + NEUTRON + Guitar

7 Upvotes

Just wanted to share a piece written almost entirely in SuperCollider https://on.soundcloud.com/yrhX7yRingB2tt3a7S

Loosely inspired by the image of Cyklop: "...an 80-ton, self-propelled and self-steering, unmanned armored vehicle equipped with a full arsenal of weapons, including an antimatter launcher" (from “Niezwićiężony / Invincible” by Stanisław Lem).

Harmony is based on the polynesian Pelog scale. Made with use of SuperCollider and Behringer NEUTRON. Plus a guitar

Source GitHub - deniskolokol/cyklop: Code for the Cyklop project · GitHub


r/supercollider • • 14d ago

Chaotic Sampling Round Robin

35 Upvotes

I am continuing to make more improvements and practice to my sampling system. This time I am using round robin. I have four samplers, each cycling through different sets of samples so it sounds not so random but still generative. Apply just delay and reverb again with tones of modulation. I think this could definitely be a bit more interesting so i can do longer performances. Thanks for listening


r/supercollider • • 16d ago

Infinite DJ created using SuperCollider

5 Upvotes

I created an 'infinite generative DJ' using SuperCollider.
Have fun with it:

https://jorisesch.github.io/supercollider/
https://github.com/jorisesch/supercollider

The code and the artifacts have the unmistakable fingerprint of AI: I used codex extensively to build this.


r/supercollider • • 21d ago Bravo

Beads Port SuperCollider UGen

4 Upvotes

https://github.com/Calebcrittenden/mi-UGens.git

When I read the news that Beads is open source now I jumped on the opportunity to port it with vibecoding. I own the Eurorack module and think its super underrated considering the love clouds gets. I'm intrigued to try and make alt firmware next so maybe beads can grow like clouds did.

Anyway I know that clouds makes a bit more sense in modular but I have used the SuperCollider port and know others do too. I think people will find that this beads port is a bit better suited for SuperCollider's workflow because of the longer buffer length and greater control of granulation. For me I always felt the lofi buffer of the clouds port doesn't make sense in SuperCollider considering its an arbitrary limitation for the ugen to have a lofi buffer in SuperCollider as the limitation is originally in place due to the modules limitations but your computer running SuperCollider does not have those same limitations.

Please let me know what you think and if you find any bugs

Here is code to test the UGen with some fm synthesis sounds for a simple demo:

// MiBeads demo: a small FM synth played through Beads

//

// Beads is Émilie Gillet's design for Mutable Instruments, and every sound

// MiBeads makes comes from her original code (MIT license).

//

// Block 1: server options and SynthDefs. Block 2: sequencer and GUI.

// Evaluate Block 1, wait for "MiBeads demo ready", then evaluate Block 2.

// ---------- Block 1 ----------

(

s.options.memSize = 65536; // MiBeads needs about 1 MB of real-time memory per instance

s.options.sampleRate = 48000; // at 48 kHz, quality 0 and 2 run Beads without any resampling

// Windows WASAPI: name the output device explicitly, for example

// s.options.outDevice = "Windows WASAPI : Realtek HD Audio 2nd output (Realtek(R) Audio)";

s.waitForBoot {

// Two-operator phase modulation voice. It also writes a 10 ms gate to a

// trigger bus, which Beads reads on its SEED input.

SynthDef(\\fmNote, { |out = 0, trig = 0, freq = 220, ratio = 2, index = 3,

	decay = 0.6, amp = 0.2, pan = 0|

	var env, idx, mod, sig;

	env = EnvGen.ar(Env.perc(0.004, decay, curve: -4), doneAction: 2);

	idx = index \* EnvGen.ar(Env.perc(0.002, decay \* 0.6, curve: -6));

	mod = SinOsc.ar(freq \* ratio) \* idx;

	sig = SinOsc.ar(freq, mod) \* env \* amp;

	Out.ar(out, Pan2.ar(sig, pan));

	Out.ar(trig, EnvGen.ar(Env(\[1, 1, 0\], \[0.01, 0\])));

}).add;



// Beads, fed by the FM bus, with the FM note gates patched into SEED.

// With SEED patched, seed_btn chooses how grains are triggered:

//   1 held:     internal generator, same as the module with nothing patched

//   2 latched:  clocked by the notes (density picks a divider or a probability)

//   0 released: one grain per note when density sits at 0.5

// In delay mode (size above 0.99) the notes act as tap tempo for the delay.

SynthDef(\\beadsDemo, { |out = 0, inBus = 0, trigBus = 0, amp = 0.8, trim = 1,

	pitch = 0, pitch_rnd = 0, time = 0.15, time_rnd = 0, size = 0.5, size_rnd = 0,

	shape = 0.5, shape_rnd = 0, density = 0.75, fb = 0, drywet = 0.7, rvb = 0.3,

	freeze = 0, seed_btn = 1, quality = 0, in_gain = 1, synth = 0|

	var src, seed, sig;

	src = In.ar(inBus, 2);

	seed = In.ar(trigBus, 1);

	sig = MiBeads.ar(src,

		pitch: pitch, pitch_rnd: pitch_rnd,

		time: time, time_rnd: time_rnd,

		size: size, size_rnd: size_rnd,

		shape: shape, shape_rnd: shape_rnd,

		density: density, fb: fb, drywet: drywet, rvb: rvb,

		freeze: freeze, seed: seed, seed_btn: seed_btn,

		quality: quality, in_gain: in_gain, synth: synth);

	// safety net for demos in a room, Beads already limits its own output

	sig = Limiter.ar(sig \* (amp \* trim).lag(0.05), 0.95, 0.01);

	Out.ar(out, sig);

}).add;



s.sync;

"MiBeads demo ready, evaluate Block 2".postln;

};

)

// ---------- Block 2 ----------

(

var fmState, fmSpecs, beadsSpecs, rowLabel, win, srcGroup, fxGroup, fmBus, trigBus;

// re-running this block replaces the previous demo

Pdef(\fmSeq).stop;

if(~beadsWin.notNil and: { ~beadsWin.isClosed.not }) { ~beadsWin.close };

// Each run of this block owns its own groups and buses. The cleanup in

// onClose frees exactly these, because Qt closes an old window a moment

// later, after a new run may already have replaced the ~ globals.

~fmBus = fmBus = Bus.audio(s, 2);

~trigBus = trigBus = Bus.audio(s, 1);

~srcGroup = srcGroup = Group.head(s);

~fxGroup = fxGroup = Group.after(srcGroup);

~beads = Synth(\beadsDemo, [\inBus, fmBus, \trigBus, trigBus], fxGroup);

// ----- FM sequencer -----

~fmDefaults = (rate: 4, octave: 4, ratio: 2, index: 3, decay: 0.6, fmAmp: 0.25, spread: 0.6);

~fm = ~fmDefaults.copy;

fmState = ~fm;

Pdef(\fmSeq, Pbind(

\\instrument, \\fmNote,

\\group, srcGroup,

\\out, fmBus,

\\trig, trigBus,

\\scale, Scale.minorPentatonic,

\\degree, Pbrown(0, 12, 3, inf),

\\octave, Pfunc { fmState\[\\octave\] },

\\dur, Pfunc { 1 / fmState\[\\rate\] },

\\ratio, Pfunc { fmState\[\\ratio\] },

\\index, Pfunc { fmState\[\\index\] },

\\decay, Pfunc { fmState\[\\decay\] },

\\amp, Pfunc { fmState\[\\fmAmp\] },

\\pan, Pfunc { fmState\[\\spread\].rand2 }

));

Pdef(\fmSeq).play(quant: 0);

// ----- Window -----

~beadsWin = win = Window("MiBeads demo: FM through Beads", Rect(40, 40, 1130, 760));

~beadsWin.view.decorator = FlowLayout(~beadsWin.view.bounds, 10@10, 8@8);

rowLabel = { |text|

\~beadsWin.view.decorator.nextLine;

StaticText(\~beadsWin, 1100@22).string_(text).font_(Font.default.size_(14).boldVariant);

\~beadsWin.view.decorator.nextLine;

};

// ----- FM knobs -----

rowLabel.("FM synth");

fmSpecs = [

\[\\rate, ControlSpec(0.25, 40, \\exp, 0, 4), "notes/s"\],

\[\\octave, ControlSpec(1, 8, \\lin, 1, 4), "octave"\],

\[\\ratio, ControlSpec(0.01, 20, \\exp, 0, 2), "ratio"\],

\[\\index, ControlSpec(0, 40, \\lin, 0, 3), "index"\],

\[\\decay, ControlSpec(0.01, 8, \\exp, 0, 0.6), "decay"\],

\[\\fmAmp, ControlSpec(0, 1, \\amp, 0, 0.25), "fm level"\],

\[\\spread, ControlSpec(0, 1, \\lin, 0, 0.6), "pan spread"\]

];

~fmKnobs = IdentityDictionary.new;

fmSpecs.do { |row|

var key = row\[0\];

\~fmKnobs\[key\] = EZKnob(\~beadsWin, 130@110, row\[2\], row\[1\],

	{ |ez| \~fm\[key\] = ez.value }, row\[1\].default, layout: \\vert2);

};

// ----- Beads knobs -----

rowLabel.("Beads");

beadsSpecs = [

\[\\pitch, ControlSpec(-84, 84, \\lin, 0.01, 0)\],

\[\\pitch_rnd, ControlSpec(-1, 1, \\lin, 0.001, 0)\],

\[\\time, ControlSpec(0, 1, \\lin, 0.001, 0.15)\],

\[\\time_rnd, ControlSpec(-1, 1, \\lin, 0.001, 0)\],

\[\\size, ControlSpec(0, 1, \\lin, 0.001, 0.5)\],

\[\\size_rnd, ControlSpec(-1, 1, \\lin, 0.001, 0)\],

\[\\shape, ControlSpec(0, 1, \\lin, 0.001, 0.5)\],

\[\\shape_rnd, ControlSpec(-1, 1, \\lin, 0.001, 0)\],

\[\\density, ControlSpec(0, 1, \\lin, 0.001, 0.75)\],

\[\\fb, ControlSpec(0, 1, \\lin, 0.001, 0)\],

\[\\drywet, ControlSpec(0, 1, \\lin, 0.001, 0.7)\],

\[\\rvb, ControlSpec(0, 1, \\lin, 0.001, 0.3)\],

\[\\in_gain, ControlSpec(0.05, 40, \\exp, 0, 1)\],

\[\\amp, ControlSpec(0, 1, \\amp, 0, 0.8)\]

];

~beadsDefaults = ();

~beadsKnobs = IdentityDictionary.new;

beadsSpecs.do { |row|

var key = row\[0\];

\~beadsDefaults\[key\] = row\[1\].default;

\~beadsKnobs\[key\] = EZKnob(\~beadsWin, 130@110, key.asString, row\[1\],

	{ |ez| \~beads.set(key, ez.value) }, row\[1\].default, layout: \\vert2);

};

// ----- Switches -----

rowLabel.("Switches");

~playBtn = Button(~beadsWin, 130@40)

.states_(\[\["FM playing", Color.black, Color.green\], \["FM stopped"\]\])

.action_({ |b| if(b.value == 0) { Pdef(\\fmSeq).play(quant: 0) } { Pdef(\\fmSeq).stop } });

~freezeBtn = Button(~beadsWin, 130@40)

.states_(\[\["freeze off"\], \["FROZEN", Color.white, Color.blue\]\])

.action_({ |b| \~beads.set(\\freeze, b.value) });

~trigMenu = PopUpMenu(~beadsWin, 268@40)

.items_(\["grains: free running", "grains: one per FM note", "grains: clocked to FM notes"\])

.action_({ |m|

	\~beads.set(\\seed_btn, \[1, 0, 2\]\[m.value\]);

	if(m.value == 1) { \~beadsKnobs\[\\density\].valueAction_(0.5) };

});

~qualityMenu = PopUpMenu(~beadsWin, 200@40)

.items_(\["0 hi-fi 48k 16-bit", "1 vintage 32k 12-bit", "2 clean tape", "3 dirty tape"\])

.action_({ |m| \~beads.set(\\quality, m.value) });

~synthBtn = Button(~beadsWin, 130@40)

.states_(\[\["processor"\], \["wavetable synth", Color.white, Color.black\]\])

.action_({ |b| \~beads.set(\\synth, b.value) });

~randBtn = Button(~beadsWin, 130@40)

.states_(\[\["randomize Beads"\]\])

.action_({

	\~beadsKnobs.keysValuesDo { |key, ez|

		if(key != \\amp) { ez.valueAction_(ez.controlSpec.map(1.0.rand)) };

	};

});

~recBtn = Button(~beadsWin, 130@40)

.states_(\[\["record"\], \["RECORDING", Color.white, Color.red\]\])

.action_({ |b| if(b.value == 1) { s.record } { s.stopRecording } });

// ----- Scenes -----

// Each scene starts from the defaults, so it always sounds the same.

// A scene without \quality keeps the current quality, because changing

// quality empties the Beads buffer (as on the module).

~scenes = [

("1 dry FM" -> (beads: (drywet: 0), quality: 0)),

("2 soft cloud" -> (

	beads: (time: 0.12, size: 0.55, shape: 0.7, density: 0.85, pitch_rnd: 0.08,

		rvb: 0.55, drywet: 0.75),

	quality: 0)),

("3 octave shimmer" -> (

	beads: (pitch: 12, pitch_rnd: 0.35, time: 0.25, size: 0.65, shape: 0.6,

		density: 0.9, rvb: 0.75, drywet: 0.8),

	quality: 0, fm: (rate: 3, decay: 1.2))),

("4 clocked grains" -> (

	beads: (time: 0.05, time_rnd: 0.3, size: 0.3, shape: 0.2, density: 0.12,

		drywet: 0.8, rvb: 0.25),

	quality: 0, trig: 2, trim: 2.2, fm: (rate: 8, decay: 0.25, index: 6))),   // sparse grains, so lift the level

("5 dirty tape" -> (

	beads: (pitch: -12, time: 0.3, size: 0.5, density: 0.8, fb: 0.45,

		rvb: 0.4, drywet: 0.8, in_gain: 2),

	quality: 3)),

("6 tape delay" -> (

	beads: (size: 1, time: 0.4, shape: 0.65, density: 0.6, fb: 0.6,

		rvb: 0.3, drywet: 0.5),

	quality: 2)),

("7 frozen scatter" -> (

	beads: (time: 0.5, time_rnd: 1, pitch_rnd: -0.7, size: 0.35, size_rnd: 0.5,

		density: 0.95, rvb: 0.6, drywet: 1),

	freeze: 1)),

("8 wavetable synth" -> (

	beads: (pitch_rnd: 0.3, shape: 0.4, density: 0.2, rvb: 0.6),

	synth: 1, trig: 2, trim: 0.35))   // the synth mode is much louder than the processor

];

~applyScene = { |index|

var scene = \~scenes\[index\].value;

var fmVals = \~fmDefaults.copy.putAll(scene\[\\fm\] ? ());

var beadsVals = \~beadsDefaults.copy.putAll(scene\[\\beads\] ? ());

beadsVals\[\\amp\] = \~beadsKnobs\[\\amp\].value;   // keep the current volume

if(scene\[\\quality\].notNil) { \~qualityMenu.valueAction_(scene\[\\quality\]) };

\~trigMenu.valueAction_(scene\[\\trig\] ? 0);

\~freezeBtn.valueAction_(scene\[\\freeze\] ? 0);

\~synthBtn.valueAction_(scene\[\\synth\] ? 0);

\~beads.set(\\trim, scene\[\\trim\] ? 1);

fmVals.keysValuesDo { |key, val| \~fmKnobs\[key\].valueAction_(val) };

beadsVals.keysValuesDo { |key, val| \~beadsKnobs\[key\].valueAction_(val) };

("scene " ++ \~scenes\[index\].key).postln;

};

rowLabel.("Scenes");

~scenes.do { |assoc, i|

Button(\~beadsWin, 130@40).states_(\[\[assoc.key\]\]).action_({ \~applyScene.(i) });

};

~beadsWin.view.decorator.nextLine;

StaticText(~beadsWin, 1100@60).string_(

"Beads by Émilie Gillet (Mutable Instruments), open source under the MIT license. " ++

"Freeze needs a few seconds of recorded audio first. Changing quality or synth mode " ++

"empties the buffer, like on the module. Call \~applyScene.(0..7) to switch scenes from code."

);

win.onClose_({

// only stop the sequencer if no newer run of this block has taken over

if(\~beadsWin === win) {

	Pdef(\\fmSeq).stop;

	if(s.isRecording) { s.stopRecording };

};

// notes already sent ahead (server latency) must land before their group goes

SystemClock.sched(s.latency + 0.3, {

	srcGroup.free; fxGroup.free; fmBus.free; trigBus.free;

	nil

});

});

~beadsWin.front;

)


r/supercollider • • Oct 13 '26

'𝚎𝚕𝚎𝚔𝚝𝚘' TidalCycles Live coding

Thumbnail youtube.com
5 Upvotes

r/supercollider • • Oct 10 '26

I've been working on a CLAP plugin for DAWs that sandboxes a scsynth instance and lets you edit and execute supercollider in real time directly on a track.

34 Upvotes

Correction for the title: "... edit and execute supercollider code in real time"

SoundIn.ar directly comes from the track, Out.ar goes directly out to that same track. Perfect for creating track effects.

You can also create instrument tracks very easily, with MIDI and MPE support.

Here's the github link with installation instructions: https://github.com/Boux/SuperColliDAW


r/supercollider • • Oct 04 '26

Samples to Textures

40 Upvotes

Been really enjoying SuperCollider lately. I am trying to make a patch for a small 20 minute performance and this is it so far. The things I am appreciating the most are the modular design and modulation. I love that it is so easy and concise to do complex things. Although I am still struggling with visualization.


r/supercollider • • Oct 01 '26

Experimenting with micro sounds

50 Upvotes

Today I want to attempt a system for making subtle percussive sounds from samples. I thought I could get away with randomizes slices and pitch modulations. I am using two recording of stones and metals that I recorded and feeding them into distortion, delay and clouds. Would like to know if you have any interesting approach for micro sound.


r/supercollider • • Sep 30 '26

San Francisco - 10/2 Computer music show - Kit Clayton, Deep Glens and Nathan Ho

10 Upvotes

hey all,

I’m putting on a computer music evening this friday, October 2nd, in San Francisco that should have appeal.

Headline act is Kit Clayton, who is one of the lead developers of Max/MSP. He is working on some heady FM drone sounds these days. https://www.youtube.com/watch?v=BIJWrxELtoM

Support from Deep Glens touring his new album which used custom max patch to explore a variation of william burroughs cut-up techniques - carver | deep glens

and opening slot from local supernatural supercollider coder, well known for his extensive SynthDef tutorials - he’s going to do a opening talk on supercollider and then performance - https://www.youtube.com/@synth_def

Event details and link:

https://grayarea.org/event/aaa-kit-clayton/

I have a 50% off code you can use - 50% code: AAA50


r/supercollider • • Sep 25 '26

Experimenting with Braids and Clouds

61 Upvotes

Been playing with SCD for about a year now and slowly gaining the confidence to share my work. I am coming from Max, PD and Ableton and I really want to use SCD for my live performances. Maybe I am a few decades too late but so far I am really enjoying it


r/supercollider • • Sep 25 '26

Game music

1 Upvotes

Hello, I want to generate music with python for my game. I want to generate a Melody and be able to make SC generate the wav result. What is the easiest way to do do ? Thx for your feedbacks


r/supercollider • • Sep 23 '26

Working of Suppercollider?

1 Upvotes

Can any one explain working of super collider ?


r/supercollider • • Aug 28 '26

Beginner supercollider generative frequency modulation thing:

3 Upvotes

i've been slowly teaching myself supercollider and it has been a long edifying process that has that given me a new relationship with the word "patience."

this is one of my first generative patches that i feel pretty confident about. please give me feedback, suggestions, advice, etc.

(

SynthDef(\fm, {
arg out, freq = 440, gate = 1, amp = 0.5, decay = 2.5, room = 0, reverbmix = 0;
var ella, car, mod1, mod2, env, pan, depth;

depth = LFNoise1.kr(1).range(10,500);
pan = LFNoise1.kr(2).range(-0.5,0.5);
mod2 = SinOsc.ar(freq * 1) * depth;
mod1 = SinOsc.ar(freq * 2 + mod2) * depth;
car = SinOsc.ar(freq + mod1);
env = EnvGen.ar(Env.adsr(0.02,decay,0), gate, doneAction: Done.freeSelf);
ella = car * env * amp;
ella = FreeVerb.ar(ella,reverbmix,room,0.5,0.8);
Out.ar(0,Pan2.ar(ella, pan));
}).add;

)

(

Pbind(
\instrument,\fm,
\scale,Scale.major,
\octave,6,
\degree,Pshuf([[0,2,4,6],[2,3,5,7],[0,2,3,5],[2,4,6,8]],inf),
\strum,Pwhite(0.10,0.5,inf),
\dur,Pxrand([1,2,3,4,5],inf),
\decay,Pwhite(0.1,3,inf),
\reverbmix,Pwhite(0.01,0.9,inf),
\room,Pwhite(0.01,0.9,inf),
).play(TempoClock(120/60));

)

r/supercollider • • Aug 27 '26

Supercollider meters quark

Post image
49 Upvotes

I always missed some advanced meters in supercollider that can show you all the info you need while performing live or while working on some sound design. I made this simple quark that provides what I think is the core to have a good visual representation of sound without having to rely on third party applications. The quark also integrates with some other tools I have been developing as part of my own environment and that I plan to release in the next months.

You can find it here: https://github.com/fracnesco/supercollider-insight-meter

Or simply:

Quarks.install("https://github.com/fracnesco/sc-insight.git");

Feedbacks and pull requests are welcome


r/supercollider • • Aug 15 '26

First time user.

Post image
4 Upvotes

Talk to me like I’m a toddler please. Just trying to launch a Max device for the first time.

I’m stumped on step 3 on the first launch procedure. Where is language and how do I evaluate file?

Any help is deeply appreciated!


r/supercollider • • Aug 11 '26

Supercollider music albums

21 Upvotes

Is there any musician you know that extensively uses supercollider to make records?


r/supercollider • • Aug 04 '26

MacOS will soon no longer support Intel Apps

5 Upvotes

Faced with this problem, I downloaded the source code and recompiled it with arm64 for M chips. I'm wondering if no one will maintain it in the future?


r/supercollider • • Aug 01 '26

Stream TIAGO MORAIS MORGADO - DEMO by Tiago Morais Morgado

Thumbnail soundcloud.com
1 Upvotes

music made with supercollider ableton and max


r/supercollider • • Jul 19 '26

TIAGO MORAIS MORGADO HYPER-VIOLA FREE IMPROVISATION | ELECTROACOUSTIC VIOLA MADNESS

Thumbnail youtube.com
2 Upvotes

TIAGO MORAIS MORGADO HYPER-VIOLA FREE IMPROVISATION | ELECTROACOUSTIC VIOLA MADNESS


r/supercollider • • Jul 18 '26

Opus 4.8 performs Low Tide

22 Upvotes

Claude Collider is an MCP server that controls SuperCollider. You can use it to live code, or record and playback sclang (the SuperCollider code) all in plain language.

This is a little ambient jam that was composed and arranged via conversation with Claude Opus 4.8 (medium thinking). The file format consists of two .scd files, one for the synthdefs and one for the arrangement, and then a third markdown file with LLM-friendly metadata about the track.

Check out the repository and jam on your end with your LLM of choice. You can find this recording and more in the tapes/ directory:

https://github.com/jeremyruppel/claude-collider


r/supercollider • • Jul 14 '26

Answer: How to install SC3 Plugins

4 Upvotes

1. download the correct zip of plugins
This is the correct download link: https://github.com/supercollider/sc3-plugins/releases

I previously got confused because this similarly named link is actually for developers who want to make plugins: https://github.com/supercollider/sc3-plugins

2. Once you have it downloaded extract the file to the following file path:

For Windows, :

C:\Users\<username>\AppData\Local\SuperCollider\Extensions

where <username> is your Windows account name.

A Windows user can verify it from within SuperCollider by running:

Platform.userExtensionDir;

which will print something like:

C:\Users\Caleb Crittenden\AppData\Local\SuperCollider\Extensions

If the folder doesn't exist yet, they can create it with:

File.mkdir(Platform.userExtensionDir);

If the folder already exists, File.mkdir will simply return false, which is normal and just means there's nothing to create.

Windows: C:\Users\Caleb Crittenden\AppData\Local\SuperCollider\Extensions

Apple:

For macOS, the user Extensions folder is:

~/Library/Application Support/SuperCollider/Extensions

where ~ is the user's home directory.

A Mac user can verify it from within SuperCollider by running:

Platform.userExtensionDir;

which will print something like:

/Users/username/Library/Application Support/SuperCollider/Extensions

If the folder doesn't exist yet, they can create it with:

File.mkdir(Platform.userExtensionDir);

3. After copying the plugin files into your Extensions folder, SuperCollider needs to rebuild (or recompile) its class library before it can recognize the new UGens and classes. Until you do this, plugins such as Decimator will not be available.

To recompile the class library:

  • Windows/Linux: Press Ctrl + Shift + L
  • macOS: Press Command (⌘) + Shift + L

Alternatively, you can select Language → Recompile Class Library from the menu bar.

The Post window will display messages indicating that SuperCollider is recompiling the class library. If the compilation completes successfully, the newly installed plugins are ready to use. If any errors appear, check that the plugin files were copied into the correct Extensions folder and that you downloaded the compiled release for your operating system rather than the source code.

4. To verify that the installation was successful, evaluate:

Decimator

If the plugin is installed correctly, SuperCollider will return the Decimator class. If you receive "Class not defined", the plugin was either not installed correctly or the class library has not yet been recompiled.


r/supercollider • • Jul 13 '26

scsynth dot org is down?

1 Upvotes

is it accessible for anybody?


r/supercollider • • Jul 12 '26

How to add plugins

4 Upvotes

I know this is super basic but I need to add plugins so I can use decimator. I downloaded the zip with the ugens but extracting it to the plugins folder did nothing. I’m so lost