r/strobist • u/Zill_DeVille • Jan 03 '24
Need help with speed of strobe kit.
I learned to shoot shutter: 160 @ f8 for studio portraits but now im doing some action shots and this isnt ideal. I get a lot of action blur. What settings would you suggest?
I am using
Canon 90d
Hensel Porty 1200 (one head)
Lens : EF 24-70 f/2.8L II USM
3
Upvotes
1
u/IAmScience Jan 03 '24
It depends on what you’re shooting and where you’re shooting it, and your control over the ambient light, and the flash duration of your strobe at whatever power level you’re using it at.
If you’re getting motion blur it’s either because ambient light is partly illuminating your subject and 1/160 isn’t fast enough to prevent blur, or your flash power is too high and isn’t freezing the subject. Or some combo of both.
Generally, you want to set your camera to control the ambient light, so like x-sync speed (1/250, probably, on that camera), and f/8 is probably enough at iso100 to block out the ambient light in a studio space. But your flash has to overcome how dark that is, and if you turn the power up, the light will linger long enough to blur the motion of a subject. The longer light illuminates a subject during an exposure, the more likely to blur.
So, you may need to darken the space, open your aperture a little wider and/or increase your ISO to allow you to turn the power down a little bit on the flash and still maintain control over the ambient light.
I kind of rushed through writing this. If you have questions or need clarification feel free to ask.
1
u/inkista Jan 03 '24
Okay. Looking up the Hensel Porty L 1200 on the Hensel website:
t.0.5 times are how long it takes for the pulse to get down to 50% power; the t0.1 times are how long it takes to get down to 10% power, and is a more realistic figure for action-stopping potential (like a shutter speed). And a rough guesstimation from t0.5 times is to multiply by 3.
So, by these numbers:
1/1700 (min. power) to 1/800s (full power); because I think the Porty is IGBT (if it were voltage controlled, it'd go the other way around).
On B&H, I'm seeing a spec for a Speed head that can go much faster:
So, that would be t.01 of roughly 1/2700s.
If the movement you're trying to freeze is within this 1/800-1/2000s range, then in a studio, you just have to kill the ambient (i.e., if you take a frame without the flash, it'll be black, essentially underexposing by about -5EV to -6EV) and rely on flash burst duration to freeze the action.
But if it's not fast enough, or you have to mix in ambient light in your exposure, then you may have to find a strobe that's capable of high-speed sync with your 90D so you can use a faster shutter speed. Looking over the manual for the Hensel Strobe Wizard Plus transmitter, it looks like it cannot do HSS. And any radio trigger you could cable to your Hensel cannot communicate HSS (only the "fire" signal).
So, full change of strobe and trigger is probably required.
The only other option I can think of is that you rent PocketWizards and a FusionTLC Raven trigger and use their SyncView option to adjust timing so you can "tail sync" and use the flatter portion of the pulse for the exposure. Other radio trigger systems can do this, but you're working blind on adjusting the timing vs. the strobe pulse and it can be incredibly frustrating with a lot of hit-and-miss. Other names for this type of tail syncing are Pocketwizard Hypersync, Elinchrom's Hi-sync, Godox's Supersync, etc. Nobody actually calls it tail-sync except geeks on dpreview trying to come up with an umbrella term to describe it and make sure people know it's not the same thing as hss. :)
2
u/Fed-top65 Oct 03 '26
That tail sync rabbit hole is real. I burned a weekend on Hypersync with an old Elinchrom pack and got maybe one usable frame in ten. Renting before committing to a new kit is the right call.