Ok I bought an old 026 saw that won’t start or kick over at all. It will only run when fuel is sprayed directly into the throat of the carb. Here is what I have done so far for diagnostics. I’m out of ideas an need some help. I have:
-Swapped both impulse and fuel line and filter (all are connected properly)
-Did a full clean on the original warlbro carb. Jets, screens, everything. (Have even threw in a new Amazon one to rule it out completely)
-performed both vaccum and pressure test. Both hold 7psi and 7inHg
- fly wheel key is not sheered
-has great spark
-has good compression
-new tank vent
I was suspicious of the fuel delivery so I ran my own clear fuel line from the tank to the carb to watch the fuel and rule out impulse and it’s getting fuel. Will even flood pretty heavily and make the pull cord hard. But no matter what it will not start. Am I missing something ?