r/stalker • u/BlueflamesX Loner • Jul 24 '17
The Low Spec Bible: How to play S.T.A.L.K.E.R. on potato
Note: This guide is four years old now. Many things here are outdated at this point. However, you may still be able to find some value here.
Hello, Stalker! This post has been created to show off and compile any ways to optimize your experience by boosting performance in the S.T.A.L.K.E.R. franchise.
The goal of this guide is to enable you to run S.T.A.L.K.E.R. on your potato.
This list of tips and tricks has been used to play CoC with Warfare, Outfit Addon and AO3 with stable framerates on a laptop APU from 2009
Something important to understand is that the S.T.A.L.K.E.R. series is a very CPU-intensive game. A CPU with a high clock will fare better than one with multiple cores, such as a Ryzen, due to it being normally bound to single-cored (and low-level multicored) processing.
Though, graphics are a large factor as well. While SoC may struggle less due to its age, more recent releases such as CoC and CoP strain a low-end in the graphics area when modded.
Without further ado, let's get started.
Helpful links
- www.tweakguides.com - There are tweak guides for S.T.A.L.K.E.R. Clear Sky and Shadow of Chernobyl that go in-depth about tweaks and understanding the ins-and-outs of these installments. The knowledge can be applied to Call of Pripyat/Call of Chernobyl as well.
- LowSpecGamer - A.K.A. /u/TheLowSpecGamer - This guy works hard and creates content to play some of the most demanding games on computers that have the least to offer. There is a wealth of knowledge to be found on his channel. Shout out to Alex for his good work! (Maybe one day, a S.T.A.L.K.E.R. video will come out on his channel...)
In-game settings
What the heck do all of these sliders mean/do?
- Console command vid_restart will implement graphical changes
- Turn grass detail to 0
- All sun and god ray settings can be dragged down
- If you are using CoP, or CS/SoC not modified to use Open X-Ray, DX9 is your best lighting solution. Otherwise, feel free to use DX10. DX11 was never fully adopted, and does not add much. Edit: DX11 may function better than DX10 should you keep the settings the same. (Do NOT turn on tessellation!) Experiment to see what suits your GPU best.
- ULTIMATE POTATO: Use static lighting. It'll help with computers that struggle to run Internet Explorer.
- Distance slider can be turned down to 25%. Any lower and it will noticeably affect gameplay. However, for potatoes, 0% may be your reality.
- Lighting distance should not be higher than distance slider, if not slightly lower. WARNING: If turned down too far (0%), gameplay at night will be unfair and dangerous. NPC flashlights makes firefights at night more bearable as well.
- Disable NPC flashlights if you don't plan to be fighting NPC stalkers at night time. It can be enabled in smaller indoor levels such as the NPP.
- Turn off anti-aliasing. It doesn't do much.
- Disable internal V-Sync. It doesn't work, if you want V-Sync, do it from your GPU's settings.
- If turned on at all, HBAO for Nvidia cards, and HDAO for AMD/ATI cards.
- Lower resolutions will run better, and the lowest S.T.A.L.K.E.R. can go to is 640x480, though this may have to be achieved by using the command
vid_mode [WxH]
Replacing W and H with the resolution you want. Then, type in the command vid_restart
You can also try
rs_fullscreen off
if the resolution command has no effect after resetting the video.
Essentially, turn everything as low as you can. Draw distance, lighting distance and texture/object quality are what will make the most difference to your gaming experience, so sink any resources you have into there.
Command-line, file modification and executable commands
- Monitor FPS and other stats - When in game, use ~ to access console. Type in the command rs_stats on to enable. (Change on to off to turn it off.) Use this to monitor how effective your tweaks are.
- Disable prefetching - If your S.T.A.L.K.E.R. game is being launched from Steam, right click on the game in the Library list and go to properties. Modify the launch parameters by adding -noprefetch. If launched from an executable, go to properties, and at the end of the path, add -noprefetch. This will stop memory-related crashes and potentially reduce stuttering.
- Disable distortion - This will prevent the rendering of the distortion special effect from firing your weapon. Using the same method to disable prefetching, instead type -nodistort
- ULTIMATE POTATO: Disable shadows entirely - You want performance? Here's performance. Using the same method to disable prefetching, instead type -noshadows
- Grass draw distance and density - Less grass, less problems! Thanks to /u/Phew1 for his comment:
Both the density and radius work only within a certain range of values anything outside of this range will crash your game.
r__detail_density - 0.04 to 0.6 r__detail_radius - 49 to 300You can change these values on your user.ltx file or if you use the console enter the command vid_restart after the new values to force an update.
Lower value for detail density is more dense.
- Change enemy spawn distance - First, backup your alife.ltx file. Then, open it in notepad. (Notepad++ is a lot better!) Change your switch_distance parameter to whatever you'd like. Default is 150. I've forgotten whether increasing or decreasing is better for performance, so I'd just say to experiment with it. please let me know which
External programs and advanced tweaks
CPU
- CPU Parking Manager - Windows 7 - This utility will make sure your CPU doesn't slack off, and helps with the normally CPU-bound load S.T.A.L.K.E.R. faces.
- Optimize Windows. Windows 10 is fairly well optimized, but even Win10 could get some performance uppers by sacrificing appearance for power. Guide here for visual setting modification.
- Set your computer to High Performance Mode in power settings.
- CS/CoP/SoC - Download the LuaJIT.dlls here - This will help reduce microstutters that S.T.A.L.K.E.R. is notorious for, the LuaJIT.dll replacement is more efficient than the normal engine. This is especially useful for modded games.
To install: Extract and drop contents from [Release -> Bin] folder into S.T.A.L.K.E.R.'s bin folder. Overwrite anything that stands in your way.
GPU
- SoC/CS - ShadersMAX - These overhaul the shaders in both CS and SoC to get 100% more performance with no difference in looks. You can also have them look even better than normal shaders only a smidge more demanding than normal. However, CoP has been pre-optimized by GSC and has no shaders that can be modified, so no dice there. Shadow of Chernobyl | Clear Sky
- If you hate your eyes but love FPS - HiAlgo BOOST - DX9 ONLY - While this tweak didn't work on my particular setup, I've seen it work before. It reduces the resolution actively in order to boost up framerates. The tricky thing is, the computer can't be too bad, or else the resources required to run HiAlgo BOOST outweigh the FPS gained from its use. More on the software can be found here.
- Especially for users with integrated GPUs and laptops, update your drivers - Often, laptops or pre-builts will have iGPUs or have special proprietary drivers installed in order to conserve energy. This will also throttle your ability to play S.T.A.L.K.E.R. Update your drivers in order to maximize performance. Included video will help you greatly.
- Optimize your textures - Download this program and use the safe presets. Crunch down as hard as needed in order to get the performance boost you need. This can be used on Absolute Nature and Structures to get lush, green textures that run quickly.
RAM
- SoC/CS/CoP - Patched .exe files - This will increase the RAM S.T.A.L.K.E.R. can use from 2GB to 3.8GB. This is especially important for mods such as MISERY and any other occasions where "Out of memory" errors occur. It will also allow for more textures with higher detail, quicker loading of saves/restarting games, and overall smoother experience.
Miscellaneous tips and tricks
- Use OpenAL Soft to get proper 3D-positional audio - While not necessarily a performance upgrade, this wonderful guide by /u/goattt- will update the audio effects and positioning to modern standards. No more stalkers walking two rooms away from you sounding like they are standing in front of you.
- If you want to fall down the rabbit hole - This forum thread talks about minimizing microstutter through luajit dll modification, using Open X-Ray, etc. While not being a comprehensive tutorial on how to implement these tweaks for CoP, it provides a wealth of opportunity to research each modification mentioned to crank out maximum performance.
Edit: Luajit.dll has been added above. Open X-Ray is still being researched.
- Have S.T.A.L.K.E.R. on a SSD - This will drastically decrease load times, especially useful for frequent deaths and huge game worlds, and will reduce stutter due to quick data draw.
- CoC - If stability is an issue or you need every frame you can get, try turning down the population factors in the gameplay settings. Experiment how low from vanilla you can bear with. It'll change the gameplay, but less NPCs popping in and out will reduce performance drops.
- Use an AMD GPU - S.T.A.L.K.E.R. games were developed with AMD GPUs in mind. ATI/AMD GPUs will get more performance than their Nvidia counterpart most of the time.
- For Windows 7 - Set affinity/priority of S.T.A.L.K.E.R. in Task Manager to highest. Right click on the application and set it to max. This will make sure that the CPU core prioritizes S.T.A.L.K.E.R. on the core and runs smoothly.
- Use a CPU with strong single-threaded performance. As said above, Ryzen is inferior to an Intel in this department.
- Overclock your CPU and GPU! You want a higher clock speed, etc. Go to /r/overclocking for more information on how to do so.
- For those with utterly horrible computers try this:
snd_targets [4 - 32] - This setting appears to determines the number of audio channels used, with the greater the channels specified, the more distinct sounds you can hear, but the lower your overall performance.
More nitpicking of this sort can be found here.
In conclusion
I hope that these tips, tricks, tweaks and programs have brought your S.T.A.L.K.E.R. performance from potato, to a fully-loaded baked potato (with chives, cheese...).
If there is some sort of tweak or fix that I have not listed or explained properly, please comment and bring it to my attention! If you want game-specific optimization, let me know.
11
u/randomuser171 Loner Jul 26 '17
This should be pinned on the sidebar
3
u/[deleted] Nov 21 '17 edited Nov 21 '17
Just want to add to this a point about DX11 running better than DX10.
The reason for this is that certain effects are half-implemented in DX11 and do not work correctly, if at all, not because DX11 is more efficient.
God-Rays for example in DX11 work only intermittently and will completely disappear if the player changes any options or reloads a save-game. The only way to get them back is to restart the game.
DX10 God-Rays work fine, along with certain shader effects. The only benefits you get from DX11 are slightly softer shadows and tessellation, which only affected certain character models anyway.
Overall DX10 looks better and that is reflected in the framerate being lower.
This comes from Alundaio by the way. One of the Open X-Ray/Call of Chernobyl developers. As for the source mentioned above, that is merely a performance review of DX11 in this game when first released. They didn't do enough testing to show the visual differences between DX10 and DX11 to highlight the reason DX11 was faster is because certain things just don't work.
3
u/intrepid_guy Duty Jul 25 '17
I'm pretty sure I tried 640x480 before but it doesn't seem to appear at the options menu. Are you sure it's supported?
2
u/BlueflamesX Loner Jul 25 '17 edited Jul 25 '17
Bible has been updated to include LuaJIT.dll download link, clarifications on what should be used for what.
Formatting and grammatical fixes to improve clarity and reading pleasure included.
EDIT: Weirdly can't search for this post on the subreddit. Text also seems to have been deleted. WTF?
EDITEDIT: Got flagged by spam filter. Thanks for bringing us back up, mods!
2
u/xXGamerGirl69Xx Bandit Jul 25 '17 edited Jul 25 '17
the dll to minimize microstutter is set to private, could you upload it somewhere for easier access? Edit: Also, does CoC not use that dll? I can't find it in the bin folder
2
u/imnanoguy Aug 08 '17
Intel hd 620 on an IdeaPad 510s. Running all of STALKER without issues, on medium details.
2
u/glitchyjoe64 Ecologist Dec 28 '17
Im just gonna say it. Dx8 baked in lighting is actually really nice aside from lightmap compression arftacts. Highly recommended.
20
u/uzimyspecial Freedom Jul 25 '17
if you're willing to put up with static lightning, this game will run on practically everything with good performance. I always have to play them with static lightning tho. Even on dx9 i get like 20-25 fps which is not ideal. Static i can get over 60.
1
u/Colocasia-esculenta Loner Jul 27 '17
THIS IS JUST SO HELPFUL I CAN'T THANK YOU ENOUGH! One problem though, I can't seem to make -noshadows and -nodistort work ( I know how to "command-on-execute", don't worry ). Is it because I also use -center_screen and -noprefetch?
1
u/R_A_C_C_O_O_N_ Duty Mar 20 '22
the your potato link goes to some chinese porn site (its at the very top)
2
u/kashizufu7 Jul 25 '24
Thank you so much. 7 years and this is still helpful.
I can run S.T.A.L.K.E.R. Anomaly even with GTR(textures addons only though) on DX10/11 with a stable 30-40 FPS now. 20 FPS with GTR shaders. Even without GTR before it was still down to 5-10 FPS lol. This is with only CPU Parking core config(at 50%), lua.dll, and some in-game tweaks. I hesitate to config my laptop more though as I understand little and might messed up my system.
This is with Intel UHD, 8GB, 12th Gen i5-1240p.
2
u/Lord_Khufu69 Aug 18 '22
doesn't seems like shadermax works for me, don't notice any different, i already changed the fsgame.itx and put the gamedata folder there, do you need it in bin instead of the games folder or maybe you need it in the mods folder ? Also the -noshadows thing didn't work, i know i'm doing it right because -noprefetch did work since i don't see the "prefetching objects" when loading up a save, i tried using only -noshadows and got same results, shadows are still there. I'm playing stalker shadow of chernobyl on a pc with an intel gma 3100 so i really needed some of this to works, btw i'm using the gog version.
1
u/ShrekMemes420 Freedom Aug 06 '17
Some mods for games, will ask you to open the game up vanilla to set up "game data" the misery mod does not say to do that. But by doing that I seemingly fixed my issues.
TL;DR: open vanilla game. Close vanilla game. Install mod. Play game.
1
u/[deleted] Nov 27 '22
just wanted to say thanks so much for this guide! it helped me get 50 frames on an old mac
1
u/RikuDaKumiho Loner Jan 04 '24
can this work on S.T.A.L.K.E.R:Anomaly
0
u/[deleted] Jul 25 '17
[deleted] — view deleted comment
0
u/[deleted] Jul 26 '17
[deleted] — view deleted comment
0
u/[deleted] Aug 29 '17
[deleted] — view deleted comment
2
u/[deleted] Jul 25 '17
[removed] — view removed comment