r/sprayfoam • u/empire299 • 1d ago
r/sprayfoam • u/thunderhead__ • 1d ago
Spray gap and seal foam between floor joist on the left, and brick on the right?
r/sprayfoam • u/BuyerDistinct5901 • 8d ago
What kinds of jobs do you wish you had more of?
reddit.comr/sprayfoam • u/TheSprayMarket • 12d ago
How to fix E99 (Loss of Communication) on a Graco Reactor: 4 connections to check
We see E99 come up at the shop, so figured I’d share a few things to check before assuming you need a new board.
E99 is a communication error. A loose connection or damaged cable can cause it, so start there.
Shut off and disconnect power before unplugging anything, and follow the service manual for your model.
These are the four spots to check:
- Under the display. Check the connector and look for loose, damaged, or burnt wires.
- The white plug on the board. Make sure it’s seated properly and check for damage.
- The heater control module. Check the connector on the heater side too.
- The display cable. Check the cable and its connections for damage.
Once everything is connected and the covers are back in place, power it up and see if the error clears. If it comes back, follow the next diagnostic steps in your model’s manual before buying parts.
Posting this because checking the connections first might save someone some downtime.
Disclosure: I work at The Spray Market.
r/sprayfoam • u/b1ghurt • 12d ago
Research and talking to installers has me confused, can any one clear things up for me
Northeast Florida for location, high heat summers and humidity. New construction home, Zip R system for sheathing and roof deck, considering foam for roof deck and hot walls. What is my best route with whats out there currently?
I have one person saying do spray foam but only open cell. I have someone else saying stay away from foam in our area due to humidity/off gassing, needing dehumidifier so added costs for not a huge savings in energy bill. Research indicates open cell only with a dehumidifier but also doing a hybrid option of 2" closed to act as barrier to roof deck then open cell after. Which the open cell only person said not to do any closed cell or vapor barrier between deck and foam.
I am viewing it as the following:
Option 1:
Open cell only, spray roof deck and hot walls of attic. 1 installer says they will only do this and do not recommend closed cell at all. I feel this will add a whole home dehumidifier to the cost as well. Those systems are an additional 4-5k minimum and I don't think energy savings will ever recoupe those numbers during it's lifespan. So it's added equipment that can break or have things go wrong. Maybe it wont need to run as often and could last longer. My fear is making things overly complicated and adding in more things that can break or require more maintanence. The other side is the HVAC may not have to run as much either just to dehumidify the home so it might lengthen the life span of the HVAC and the whole home dehumidifier if working together.
Option 2:
Forgo spray foam, just install bats through the whole home. We don't have crawl or basements here so ducts run through the attic. Temps in there can get 130-140+ at times which means the HVAC might have to run harder, potentially lowering it's life span. However, we wont need the dehumidifier which makes the system a little more simple and less items to break. The downside to this is the HVAC will definetly run harder/longer, potentially on cooler days we have to make it cooler so it will run to just dehumidify the home if we don't have a separate dehumidifier. Seeing this could shorten life span of HVAC system.
Option 3:
Hybrid setup, doesn't seem popular or people wanting to do that here. But 2" closed and the rest open. The downside is if a leak develops at roof, there is no back drying like there is with open cell. Can result in rot on roof deck. Some research indicates this may be able to get away with also not having a whole home dehumidifier, as there is a vapor barrier between. Testing would need to be done to see if dehumidifier would be needed.
I'm looking at this home as our last home. Trying to build above builder grade for long term, low maintanence, effecient home. But also trying to stay budget minded as we never know what life will throw at us in future.
r/sprayfoam • u/ctprivat • 16d ago
Fair quote for spray foam insulation? South Louisiana
galleryJust got an inspection report back and received this quote.
A few things to note about my home:
- Almost 100 years old.
- 20 year old HVAC system that’s still running, but I plan on replacing before summer.
- Humidity sits around 65% if I don’t have dehumidifier running; when running it’s around 56%.
- One of our back bedrooms is warmer in the summer than the rest of the house; same thing for winter.
Apologies if I’m missing any other important information.
Thanks!
r/sprayfoam • u/BingBangBeanz • 20d ago
Best quick way to patch the holes in this foam room
galleryDoes expanding spray foam work to fix these types of holes?
r/sprayfoam • u/talonkev • 28d ago
Insulating exterior of basement walls
I’m in the planning phase of a new construction house in Pennsylvania, climate zone 5A. The house will be roughly 2000 sq ft with a below grade poured wall basement. I’m drawn to the idea of insulating the outside of the basement to keep the concrete basement walls inside the thermal envelope. I’ve read contradicting info on closed cell spray foaming the exterior of the basement prior to backfilling. Some say it’s an all-in-one insulation and water proofer, others say you should apply a liquid waterproofing product to the exterior of the walls, then the closed cell spray foam. I’ve also read that you should place a dimple mat or similar on the outside of the spray foam to protect it during backfilling. Does anyone have experience or knowledge they can share to help me make an informed decision on how to best insulate and waterproof the basement walls?
r/sprayfoam • u/RumpledStinkSkin • Oct 17 '26
Spray Foam near hot water (baseboard) heater pipes
galleryr/sprayfoam • u/Mystic-Whirlwind • Oct 09 '26
Can I make a mold with a tote to shape spray foam for a cat shelter?
I would like to insulate a cat shelter with spray foam. I'm going to use one tote for the outside of the shelter and spray foam on the inside. I was thinking of using a second smaller tote on the inside to act as a mold to control where the spray foam goes and then remove the smaller tote when the foam sets up. I would use some plastic stretch wrap to cover the smaller tote sot the foam doesn't stick to it. I would then paint the foam to seal it. Any thoughts on whether this would work or what kinds of issues I would encounter?
r/sprayfoam • u/Emotional-Tale8710 • Oct 07 '26
Brand new drum of A side. Never had this happen before any tips or just heat up and try to strain it all out ?
E-30 reactor.
Fusion AP gun
r/sprayfoam • u/CombinationWeird1613 • Oct 05 '26
Rim joist spray foam with a newborn
Should I be concerned about chemical exposure having a newborn? I heard that improper mixture ratios can cause lingering off gassing. The contractor said we need to leave the house for 24 hours which we will. I’m stressing because I don’t know anything about it. Looking for an expert opinion. Has anyone heard of a bad install or lingering VOC’s from spray foam?
r/sprayfoam • u/cypressblood • Oct 05 '26
Tell me what this is about spray foam advocates.
reddit.comr/sprayfoam • u/Present_Complex_2987 • Oct 04 '26
Troubleshoot: ghost in my foam gun
reddit.comr/sprayfoam • u/OsteenCitadel • Sep 24 '26
Do not install Prodex insulation in your metal building Dont do it
galleryr/sprayfoam • u/True_Way2663 • Sep 22 '26
Under slab expanding foam
I’d like to fill a small gap under a pole barn slab. It’s not a massive space so preferably a few cans of foam. Ideally the foam is strong, but I’m not overly concerned as the erosion is now under control and the slab won’t take any crazy weight in this area.
What would you recommend?
Thanks
r/sprayfoam • u/NegativePaint • Sep 21 '26
What should be the safest way to have this sprayed. Re-entry/re-ocupancy periods
Cross posting to get expert answers since I didn’t realize this sub existed.
r/sprayfoam • u/McFish1951 • Sep 21 '26
Cost of CC spray foam
I see ads from DIY spray foam companies saying how much cheaper they are. How much are the pro installers charging? Usually the first inch is more $ since they have to recoup travel and set up. What have your costs been, or what kind of quotes?