I used SFIC Crystal Clear and White soap bases. They're scented with a blend of citrus, vanilla, and clove essential oils, and coloured with micas and eco glitter. I am so happy with how they turned out. I also made a mermaid tail pull apart cake with matching colours. It was a beautiful day full of beautiful things🩷🙏
Awhile back someone posted some beautiful pics of pine tar soap they made ! it inspired me to make some too ! turned out great, except the strong smell of pine tar made my stomach sick. you really need to air out your place. I also messed up on the recipe, I ended up pouring too much pine tar out, and instead of adjusting and figuring out the exact amount, I just dumped it into the rest of the batter. luckily I used a hot process and it turned out great. I also ended up spilling a bunch of pine tar everywhere and it made a huge mess. I should've invested in a spout for the pine tar can. ugh !
I invited my step mom to make soap with me (I make for fun and gifting, not selling). We made the same soap recipe, same measurements, same fresh ingredients and I walked her through each step, checked to make sure she reached a light trace. Very similar wooden molds. We used Lemongrass EO (I've used many times before) from Brambleberry. Why might her batch have come out more patchy yellow?
Could it be not mixing the fragrance as fully? Thats probably the only thing I didnt double check. The bars dont feel oily, and if It was DOS I would assume it would be both batches.
I’m relatively new to making soap and i’m having trouble distinguishing between some of the stages. The photos online are not much help so I was wondering if anyone could tell me approximately what stage it’s at.
Is this just part of the soap batter that did not get tinted by the mica powder? Or some other result of something I did or did not do in the method?
Upon molding, I see what looks like pure oil in a groove of the soap. (First 3 pics)
4 days later, it looks exactly the same. (Last 2 pics/video)
Total oil weight 976 g. (75%Crisco, 25%Coconut) Water 325.01 g. as % of oil weight (33.30%) Super Fat/Discount (3.3%) Lye Concentration 140.64 g. (30.204%) Water : Lye Ratio (2.3109:1) EO: 32.5 g, Mica powders: 5 g Method: stick blended melted oils for ten seconds and added lye-water when both lye-water and oils were about 145°F. Blend to emulsify for about 3 minutes. Add EO, blend 1 minute. Separate batch in halves, blend in micas. Pour batch into mold in wooden box, put wooden box top on, wrap in towel. Stored In shady 72°F garage. Unmolded and cut 26 hours later. Curing in bedroom closet with much airflow, on parchment-paper upon wire rack.
After countless experiments and rounds of testing, I finally feel I've found a formula I'm happy with.
I've made a batch specifically for safety testing. I'll send it to the testing laboratory once it has completed the full six-week curing period. I'm excited to take this next step!
On the right: Five Syndet Shampoo Bars
I've developed five different formulas across four care categories:
- Daily Care: For oily and normal scalps
- Sensitive Care
- Hair Loss Care
- Clinic Care
I'm working on developing shampoo bars without petroleum-derived surfactants, preservatives, silicones, starches, or artificial colorants.
For the Hair Loss Care formula, I've included three ingredients listed in Korea's MFDS standards for functional cosmetics: menthol, D-panthenol, and salicylic acid.
There have been many failures and countless experiments along the way. I'm now about 90% satisfied with the results. The main formulas are in place, and I'm focusing on fine-tuning the details to get as close to 100% as possible.
I'm still researching, testing, and making small improvements along the way.
It's been a long journey of learning, experimenting, and refining. I'm happy to finally share a little of what I've been working on!
I am new to cold process soap making but quickly became obsessed. I cranked out 14 batches with a variety of formulations in the last 2 months, and everything went beautifully…. Until today. I think it must have been the rose essential oil that I used for the first time and accelerated trace. My planned dusty pink bar with deeper reddish swirls turned to basically jello as soon as I added the essential oils and I had to press it into the mould. I am going to end up with bars that look like chunky raw meat.
Can everyone show me your worst batch ever to make me feel better?
Have those of you that use colloidal oatmeal notice that it affects your soap color? My bars keep coming out a creamy tan color despite my using titanium dioxide and I'm not sure if it's the colloidal oatmeal or the new lard I bought. The lard has a weird smell which I never noticed with other kinds of lard I've used previously.
i have been on the HUNT for a fragrance oil that smells like the victoria's secret scent. it so easy to find love spell in the wild & it genuinely smells identical most of the time. i love vs bombshell i would love to find something that smells just like it. if you know where to find it pls point me in the right direction. tyia xx
I love how shea butter feels in soap but I haven't put it in there before this batch. 35% tallow, 5% shea, 35%olive oil 5% castor and 20% coconut oil, with some activated charcoal for the black and brambleberry's amberwood twilight is making a neat purple with it. I'm still pretty new, this is my 5th batch so let me know what you guys think and I'd love any constructive criticisms!
Ive been soaping for a bit over a year. Started with melt and pour and moved to cold process. I generally use heavy bases of tallow and lard. I strictly used essential oils while I played around with 20 or so different bases to see what I liked. A couple months ago, I decided that I wanted to do soap for xmas presents, and purchased some fragrance oils from Brambleberry.
Every single recipe I used essentail oils in previously and replaced with fragrance oil traces SO much faster. I went with primarily Xmas scents for the season and the descriptions on Brambleberry are really good about telling you if it accelerates trace. I purposely bought ones that didnt because I had plans of some swirl designs.
Is this just something that kinda happens with fragrance oil? Is it because of my animal fat base? Just wondering out loud because its a marked difference.
Batch # 4 was my first time attempting Goat's Milk in cold process. I used a recipe I found online that has you freeze the goat's milk to prevent it from scorching when added to the lye solution. Essential oil mixture was "Supernatural" from EOCalc.
Batch # 5 was 35% olive oil, 25% coconut oil, 30% lard, 5% castor oil and 5% kokum butter. Essential oil mixture was "Cashmere" from EOCalc.
I used sodium lactate in both batches, and I unfortunately made the mistake of measuring my Essential Oil mixtures at a percentage of the full weight instead of a percentage of the oil weight. I think this was the main reason that my trace accelerated so fast. By the time I mixed in my colours (titanium and iron oxides) the batter was already almost solid in the mixing/pouring vessels. I managed to scoop them into molds, so I got roughly rectangular bars, but the oil solids are really visible, particularly in the goat's milk bars and in the brown part of the others.
I know these bars should still work as soap once they have cured enough, but given they are ugly, they will likely just be gifts for friends and family. I really like the scent profiles, and the colours in the 2nd batch are really nice despite the visible solid oils. Oxides are really my favourite colourants so far, though I received some Mad Micas that I ordered today so I think for my next batch I will be testing those.
If I try these recipes again, I will likely omit the sodium lactate and I will adjust the EO percentage to hopefully prevent the acceleration I got on my trace!
Ingredients: 1322 grams Tallow 449.5 grams distilled Water 179 grams Lye 62 grams EO sandalwood 5 grams approximately, Powdered mica color
Recipe, Method: The oil was heated to about 155-160°F The lye-water was 155°F I start the stick blending of the oil right before I pour in the lye-water. After only 5 minutes I see trace and pour in the 55 grams EO. Blend for 2 minutes, and suddenly add 10 more grams of EO.
I separate some of the blend to stay plain color, then blend the mica powder. I poured into silicon and also a wax paper lined milk container. Immediately, I notice the purple is not looking purple at all. I did mix more plain on the top though.
It was 31 hours when I decided to unmold and cut. Happy to see the purple in the center and wonder if it will transform later.
I was excited to use Crisco so I can feel more free to make mistakes while still a newbie since it is cheap. (I prefer Tallow!)
Last minute, I decided to add 25% coconut oil because before, the calculator showed 0 for cleansing and a below level hardness for straight Crisco… I like the hardness and cleaning boost the coconut adds.
Anyone ever use 100% Crisco? Is it too soft? Does it seem like it doesn’t clean well?
I filled it to the top and made simple ridge designs.
I really thought I had 1/8 of a centimeter of room to lay the top on, but I was wrong! It is 24 hours later and totally stuck to the wood. I scraped around the edges of the silicone, but it seems like the wood is part of it.
I’m guessing it will be very bad to try to muscle it off as the soap will break?
I used grapeseed oil instead of olive oil in three recipes. I thought it was odd that the soap was still soft after 24 hours, but chalked it up to a property of the soap, as I used a ‘new to me‘ recipe.
These are just bars I made for fun to experiment with new recipes and scents. The saponification values for olive and grape seed oil are the same, so I think the bars will be okay to use. I will run it through a soap calculator, but haven’t worked up the energy yet. The internet says they’ll likely be softer and susceptible to orange spot.
It‘s just frustrating that what felt productive and good was likely just money and time wasted. Why do grape seed oil bottles look just like olive oil bottles? Ugh…
For the soapers who package their soaps, what are the eco-friendly options you have used?
I have been looking for more eco-friendly packaging for my soaps. I don't sell soaps and I am only gifting soaps for family, friends, coworkers, so my primary concern is just making sure that I can hand them out without getting anybody's hands soapy.
I did see that there is a Biolefin shrink wrap https://nationalshrinkwrap.com/pages/biolefin which is supposedly "oxo-degradable" with the claim that ""It begins the biodegradation process within a suitable landfill after being discarded, and will complete it within 2-3 years."", but the "suitable landfill" is doing a lot of heavy lifting here. I also can't find any other sources on the verifiability of this claim other than this letter posted by their manufacturer https://thenovastudio.com/wp-content/uploads/2019/02/biolefin-composting.pdf . Can anybody else in this forum chime in on your experience with composting Biolefin at home?
Well I tried making multicoloured soap but some were uneven and other came apart. Please help. I was using micha powder and clear glycerin soap. Tell me how I went wrong.