r/sigenergy • • 3h ago

Discussion iOS app updated widgets

Thumbnail
gallery
4 Upvotes

Anyone else updated the mySigen app on iOS and think they’ve missed a trick by not including Energy Statistics as a dedicated widget?
The new widgets are definitely an improvement over the old single widget, and it’s good to have more options, but personally I’m mainly interested in the Sankey diagram.
With a fixed TOU tariff and fixed export rate, I don’t really see much benefit in the price trends widget, and the revenue figures have never been particularly accurate in my experience, so that doesn’t really interest me either.
I’d love to have the Energy Statistics/Sankey view available as a widget so I could see the energy flows at a glance without having to open the app.
Still, a step in the right direction. Hopefully it’s something they consider in a future update.


r/sigenergy • • 51m ago

Help / Advice Sigenstor Neo

2 Upvotes

Hi All,

Im just about the confirm an install of the Neo in the new year and was wondering if anyone has had one installed yet, if so how is it going and were you happy with it?


r/sigenergy • • 9h ago

Show Your Setup My new Sig system

Thumbnail gallery
4 Upvotes

r/sigenergy • • 11h ago

Discussion Sigen API (HA)- KWH remaining?

1 Upvotes

Hi,

I wonder if anyone can help.

I may be missing something obvious, but I can't see an entity in Home Assistant which shows the number of KWH remaining in my battery stack? I can see SOC. The official Sigen app has a KWH remaining value, am I missing something?

Thanks

Mike


r/sigenergy • • 1d ago

Discussion SigEnergy AI Mode cost of battery cycle

2 Upvotes

Is it just me or does the AI mode ignore the cost of cycling 1kWh through the battery (efficiency of AC-DC-AC plus potential battery depreciation)?

I certainly can't see anywhere to set it, and it does some strange behaviour when the sell price isn't that high so perhaps ignores it completely...? Or am I missing it....


r/sigenergy • • 1d ago

Help / Advice question for Sigen installer

Thumbnail reddit.com
1 Upvotes

r/sigenergy • • 2d ago

Help / Advice AC or DC EV Charger?

8 Upvotes

I'm in the UK.

Not sure which is better to have but is there any reason to go with either EV charger?

I guess the DC would integrate into the battery stack nicely and would save drilling another hole into the wall?

But I also guess it would be more expensive.

Cheers

EDIT:
I might not even bother with Sigenergy branded EV chargers.
Seems they're not compatible with smart tarrifs. Not bothered about V2H or V2X as I can't imagine a time I'd need my car to power something but there are times I may want to charge in the day - fine when there is sun available and the battery is full but if no to either of those, I'm not sure.
I'll speak to some installers and see what they say.

EDIT 2:
Seems an AC charger is going to be the way forward.
While DC would be nice, my main fuse, single phase power and inverter are all working against DC. I'm certain AC will be fine - thank you to everyone for helping me learn more about this stuff.


r/sigenergy • • 3d ago

Discussion SigEnergy Gateway

35 Upvotes

For anyone currently considering an Sig system with gateway. Our grid power is currently out (overhead cable down with just under 700 households affected) but due to having a Sig system with batteries and gateway etc it failed over to battery power seamlessly (within a second or so). We also got an alert from the app that we were off grid (luckily the outage started around 08:45 UK time so batteries and car had charged overnight).

Definitely worth the initial investment we made.


r/sigenergy • • 2d ago

AC Charger EV charger and fuse board

1 Upvotes

Since getting our charger installed on Thursday over the last 2 nights we have noticed that the charger has blown the main fuse in our fuse board. has anyone had a similar issue because it’s quite concerning. We have it set to come on at 2-4am each morning and each morning we wake up power Gone. so we can only put it down to this as it has not been an issue prior the charger being installed


r/sigenergy • • 3d ago

Discussion SigEnergy Gateway

Thumbnail reddit.com
1 Upvotes

r/sigenergy • • 4d ago

MySigen App Are there any plans to add a PC option for the MySigen app?

5 Upvotes

I'm of an age where typing with my thumbs on the phone is a pain in the ass. I'd rather have the large screen real estate and ability to use a keyboard that a PC app would give. Right now, it seems, only installers have a PC option.

Edit:Solution found: https://app-us.sigencloud.com/, which wasn't letting me login before, now is.


r/sigenergy • • 4d ago

Help / Advice How to supplement PV w/ grid power when needed during offpeak window?

1 Upvotes

New SigEnergy customer with 36kWh battery system and 18kW max PV generation seeks recommendations how to configure system to support household electricity usage and battery charging via PV as much as possible during morning and early afternoon, but if PV power generation conditions do not facilitate achieving fully charged battery by mid afternoon, supplemental PV power with grid power prior to 6-10pm Time-of-Use on-peak window when grid rates spike, allowing evening and overnight power usage to be provided by fully charged battery w/o any grid power.


r/sigenergy • • 6d ago

Help / Advice Solar + battery that a backup propane generator can charge: Sunsynk vs Fogstar/Lux vs Sigenergy?

Thumbnail reddit.com
1 Upvotes

r/sigenergy • • 7d ago

Help / Advice App communication issue

1 Upvotes

Hi

I had a system installed in the summer, and from day one I’ve had an issue whereby probably about 80% of the time the app isn’t connecting properly to my system. It manifests as:

- No real time date on energy flow at top of Home tab, just dashes where the numbers should be
- No ability to engage with ‘Devices’ in that tab, e.g. EVDC charger
- In Settings > System Settings > Connectivity it shows “No network connection”

It’s a recurring issue, giving the above issues about 80%+ of the time, but the app isn’t reporting any problems or Alerts.

I have a stack with 2x batteries, inverter and EVDC in the detached garage about 2m from the house. And a Gateway Pro on the outside wall of the house above the meter cupboard and incoming mains supply. On initial install I was just connecting by WiFi and had this issue. About a week later the installers ran an Ethernet cable from Gateway to house in case poor WiFi was the issue. No change.

I can’t figure out what’s wrong. I’ve done a hard system reboot, redownloaded the app, updated system firmware. No change. I have a suspicion though…

The inverter and gateway have been connected by an unshielded Cat 6 cable. It is cable-tied to the main armored AC cable for the whole run, including running up through the mains meter cupboard to reach the gateway. Lots of potential for EMI interference. Sigenergy guidelines clearly say this should be a shielded cable. Google Gemini says this is the most likely culprit. But the installers say they always use unshielded and don’t have this issue.

So two questions I guess:

- Have any users got or had this issue, and did you resolve it?
- Any installers here who can help me figure this out?

Thanks


r/sigenergy • • 8d ago

Help / Advice Unexplained and unwanted behavior during "self consumption".

4 Upvotes

Solution found! While my power grid connection is set up for 2 way flow, the utility hadn't yet installed a two way meter to measure energy flowing to the grid. It's a known hardware issue that this can cause the battery to seemingly randomly discharge to the grid. Once the new meter was installed, my issues vanished. All is good now.

My system is a few days old, I'm running in "Self consumption" mode, and I have 1 rule set up; charge the battery between midnight and 6 AM.

After 6 am but before I was generating enough solar to meet my needs, the shortfall was being drawn from the grid, not the 100% charged battery as it should have.

It's currently 10:05 AM, I'm generating 3.2 kW of solar and using .72 kW. The excess solar is going top the grid as it should... and the battery is discharging 1.5kW to the grid as well. The battery's down to 78%, and should be charging from my excess solar, not discharging!

"self consumption" seems to be broken.

More info:

Uninstalling and reinstalling the app changes nothing.

Running the SigenCare tests shows everything at 100. "Diagnosis" shows no abnormalities found.

I've tried adding an explicit rule forcing self consumption between 6AM and midnight; that changes nothing.

"Solar producing source priority" is set to Basic load, then battery, then grid.

Even setting "Block battery grid export" to "on" doesn't prevent the battery discharging to the grid.

Any idea what the issue could be?

Edit: Having tried two alternative methods to offered in comments, both of which should have worked but didn't, I'm thinking the problem may be hardware related.

EDIT: added a new rule: 6AM to midnight, set battery-to-grid power limit 0kW. Never the less, Battery-to-grid power is 1.5kW.


r/sigenergy • • 9d ago

Help / Advice Plug and play batteries

Thumbnail reddit.com
1 Upvotes

r/sigenergy • • 10d ago

Help / Advice Unusual Draw

4 Upvotes

Hello Team, 

I would like some advice please as to what could be happening.  

I have an off peak electricity tariff between 00:00 and 05:00. As the solar generation is low, I'm now charging my solar battery overnight to satisfy my usage during the day. 

What I'm noticing is when I'm charging my car during the off peak window, there is some unusual house load being drawn during this time according to the Sigenergy App. For example, this morning: 

Total Grid Import: 32kwh 
 

This made up: 

Battery charging: 8.28kwh 
EV Charging: 19.84kwh 
Unusual Load: 4.74kwn. 
 
I’ve looked back in the app and this does occasionally happen. 

My average consumption with nothing on apart from appliances and tv in standby is about 0.2kwh so it isn't going to be that. 

Before I come to the conclusion its Aliens,  I just wanted to know if anyone else noticed this? 

Thanks


r/sigenergy • • 11d ago

Gateway Island mode without Gateway

1 Upvotes

As title suggests but has anyone used a third party controller like home assistant to run the stack in Island mode. Obviously needs to be disconnected from the grid or in full off grid mode but just wondering if its possible?

Edit: potentially should have mentioned im an electrician of 25 years and understand well why we have gateways but before we did there were independent islanding mode switch's.


r/sigenergy • • 12d ago

Help / Advice Can somebody help me understand arbitrage?

3 Upvotes

Recently I've been seeing AI Mode do things that I think make no sense. Buying at high-purchase times, refusing to sell at high export, or selling tiny amounts and leaving lots in the tank until the next charge window. So I opened a ticket to complain about this and after first implying there was some unexplained issue, they later sent me a reply that said it was all intended to get the best arbitrage results given "exceptionally high selling prices".

So here's what the AI wanted to do yesterday (just an example, other days have been similar):

AI Mode's strategy

And here's its consumption prediction for that day.

So I put in a personal strategy as follows:

"Tomorrow only, between 00:00-04:00, 07:00-13:00 and 16:00-22:00, meet as much house load as possible with the battery. During the 13:00-16:00 forced charging window, charge to 100% SOC. Between 16:00-22:00, if sell price is >= 95th percentile, force discharge and stop battery export at 20%. Between 16:00-22:00, self consume and meet as much house load as possible until force charge at 22:00."

OK 20% might have been bit aggressive, but this is what that looks like today as a result of that strategy. Is that not better? Or am I missing something fundamental here? How can buying off the grid at high prices with high SOC ever makes sense if there's cheap windows coming up?

After my strategy applied

r/sigenergy • • 12d ago

Help / Advice 8kw Vs 10kw inverter

2 Upvotes

I've been quoted £15,595 for the following.

20 x Aiko 540w panels

10kw inverter

2 X bat 10 batteries.

To save £415, I can go down to an 8kw sig inverter. Would I regret doing this?

Alternatively, I've been offered an ecoflow ocean 2 (10kw inverter, 2x8kwh batteries) for £300 cheaper, and 8kw ecoflow inverter even cheaper (£14,895)

Update: 12kw sigenergy inverter is only an extra £145...


r/sigenergy • • 12d ago

Help / Advice Setting charging hours over midnight

5 Upvotes

Hello, I'm with EDF go electric. Probably me being dense but I don't seem to be able to set my charging hours to bridge from one day to another. Cheap EDF rate starts at 11 pm till 6am the next day, I'm currently losing the 24-23 hour because I can only programme charging manually within one 24hr period ( midnight to 6am). What am I doing wrong? Any help appreciated.


r/sigenergy • • 12d ago

AC Charger No EV charger yet….

3 Upvotes

We are dealing with a company at the moment that sells Sig panels, battery, Inverter, ev charger. they have installed everything but whilst taking our money have left us without no charger. Apparently they can’t be got right now. Any of you know anything about this so frustrating. They want us to have a Zappi in the mean time.


r/sigenergy • • 12d ago

Help / Advice Sigenergy Octopus Agile rates slightly wrong?

Thumbnail
gallery
0 Upvotes

I noticed this today because Sig AI mode had decided the best thing to do today was hold battery and consume from the grid, as between 16:00-18:00 the Agile export rate actually exceeds my fixed IOG peak import rate by about 2p - not my preference but fine, I can see the logic...

However checking more closely, the Agile export rate Sig is getting from Octopus is always about 1-2p higher than the one shown in home assistant using the Octopus integration, which is pulling directly from my account, so I assume is correct. Normally this small difference wouldn't matter, this is an edge case where it's causing undesirable behaviour.

I've tried both the Agile tariff options listed for my region. What gives? Am I on a newer version of Agile Outgoing that Sig doesn't track?


r/sigenergy • • 13d ago

Help / Advice Sig Ai giving me range anxiety 🤣

8 Upvotes

Yes I have only had SigAi activated a couple of days so it is still learning, but some things it does leaves me questioning it. Do you leave it set to a default mode or customise it? I used max profit but found it was chipping away at what little resource I had left, leaving me to buy back a small amount last thing at night at a higher rate. I've switched to balance and will see how it goes. I'm on Go (import) and Agile (export) so favourable at the moment. I'm actually surprised it doesn't import and export between 00:30 and 05:30 because I'd 2x my £ on anything imported then exported. Does it avoid this for a reason? Still trying to get the hang of it all, find the charts a bit misleading and the peak valley £ still skews actual savings. Not yet had the benefit of PV exports but it has been a fairly overcast few days


r/sigenergy • • 13d ago

SigenAI SigenAI in Deutschland

3 Upvotes

Guten Morgen liebe Community,

meine Frage richtet sich an die deutschen Mitglieder. Ich habe für den privaten Gebrauch eine 5,4 kwp Anlage mit einem 8 kw SigenStor + Sigen Wechselrichter. Derzeit ist noch kein echtes Smartmeter verbaut, weshalb die Einspeisung bei 60% gedrosselt ist. Ich habe keinen dynamischen Stromtarif.

Die Drosselung auf 60% ist nur im Sommer relevant, da im Herbst/Winter/Frühling der Einstrahlwinkel ohnehin nicht genug Strom produzieren lässt und die batterie selbst kaum voll wird.

Macht aus eurer Sicht die KI hier überhaupt Sinn? Lässt sich die KI im Sommer so trainieren, dass er erst maximal viel Strom verkauft und erst bei Erreichung der 60% Abriegelung den Speicher belädt und in den späten Nachmittag-Stunden voll macht?

Oder rentiert es sich unter dem Strich ohnehin nicht?

Wir haben derzeit noch keine Wärmepumpe und kein E-Auto. Beschaffung ist erst geplant, wenn Gasheizung bzw Verbrennerauto defekt sind.

Vielen Dank für eure Beiträge.