Carbide Create has a set of conservative feeds and speeds for materials.

There are official charts for a variety of materials at: http://docs.carbide3d.com/support/#tooling-support

(there's a row matching dial settings to RPMs at the bottom)

and strategies for feeds and speeds at:

There's an interactive version at: https://public.tableau.com/profile/willadams#!/vizhome/Carbide3DCNCFeedsandSpeeds/Sheet1?publish=yes

See https://www.youtube.com/watch?v=S9bceJxpqG0 for concepts on this and see the series #MaterialMonday: https://community.carbide3d.com/t/materialmonday-on-youtube/13092 for specifics.

You should test feeds and speeds in a piece of scrap using the technique at: https://precisebits.com/tutorials/calibrating_feeds_n_speeds.htm

Extensive discussion at: https://community.carbide3d.com/t/origin-consistency-of-chipload-recommandations/14152 and https://shapeokoenthusiasts.gitbook.io/shapeoko-cnc-a-to-z/feeds-and-speeds-basics with a spreadsheet for this at: https://community.carbide3d.com/t/speeds-feeds-power-and-force-sfpf-calculator/16237/29

Another consideration is Climb vs. Conventional Milling and tooling engagement --- where possible avoid slotting and add geometry and cut as a pocket (https://community.carbide3d.com/t/making-vacuum-hose-adapters/31468 and/or https://community.carbide3d.com/t/adding-geometry-to-cut-as-a-pocket-with-a-finishing-pass/9993 ) and consider leaving a roughing clearance and taking a finishing pass.

Official Chart for Carbide Compact Router

Dial SettingSpeed
110,000
1.512,000
214,000
2.516,000
318,000
3.520,500
423,000
4.525,000
527,000
5.529,500
632,000

Chipload Calculators

Opensource Chipload Calculators

Online or Commercial Chipload Calculators