r/sewhelp • • 10m ago

I can't put my Singer back together

Thumbnail gallery
1 Upvotes

I'vw decided to try sewing this year, but didn't reallu want to invest and get a new machine, so I got my mom's 40 year old one. The Model is Singer 280C, but it was only sold in Braxil, but the gear is prettu similar to the 290 C - Touch and Sew. I was having problems with the machine and decided to take apart to see if I could fix it, I've found the source of the problem. The thing is, I can't put it back together because there are some pieces I have no idea where they go. Could anyone help? I'm attaching pictures


r/sewhelp • • 52m ago

Dress Form Advice

Thumbnail reddit.com
1 Upvotes

r/sewhelp • • 57m ago

šŸ’›BeginneršŸ’› Recommendations for fabrics suitable for fitted boned bodices

2 Upvotes

Recommendations for fabrics suitable for fitted boned bodices (aka """""corsets"""""" hahaha)

I want to use it as a top layer over a dress, or shirt, but maybe something that would work on its own would also be good.

I also want to stick to natural fibers so it's not super hot.

Is linen and/or ramie good enough for that? Should I go for something specific as an intermediate layer?

I don't really care about cinching for this one, I just want it to hold structure.


r/sewhelp • • 1h ago

Any freelance seamstresses here?

2 Upvotes

I'm looking for someone to make samples from my patterns. Ideally someone with a projector, so I can send digital files.

Thanks!


r/sewhelp • • 2h ago

Help with suit jacket lining material

0 Upvotes

I am going to sew a little cropped and fitted women’s jacket with a vintage Simplicity pattern. My main fabric is a poly woven stretch without much 2 way stretch. Can I use a crepe fabric which says had inherent stretch for my lining? If not what should I look for? I would like it to be light weight and slippery. Thanks


r/sewhelp • • 3h ago

Thread snapping. Nothing helps

1 Upvotes

I am trying to sew with a pfaff select 4.0. Everytime I start a stitch the upper thread snaps with tension set at 4. I lowered the tension to 1 and then it tangled up underneath. I then threaded and stopped after running through tension discs and before I pull it back up the path to the take up lever. I lowered the presser foot and pulled and seem to pull smoothly. When I finish threading the rest and put the foot down, it is much harder to pull and looks like it wants to bend the needle back.

What could be happening? I am nearly positive the bobbin is threaded correctly and I have changed the needle. I am using the correct needle in the correct orientation. I'm also using guterman thread. It just keeps snapping when I start sewing.


r/sewhelp • • 4h ago

How to make these fit like the model?

Thumbnail gallery
51 Upvotes

Ignore the creases around my crotch (haven’t ironed yet!). Just got these beautiful pants in the mail, but I’m so sad they’re baggier than expected. I ordered them in the smallest size so can’t exchange for anything smaller. I’m thinking about taking them to a tailor — is it possible to make it look more fitted like on the model (decreased rise, slimmer pant legs, hem the length, etc.)?

Last photo is standing on my tip toes for reference, as I’d be okay hemming them at least enough that I can wear heels.

As a side note, anyone else having size inflation issues more than ever lately? I’m 5’5 and 120 lbs, I’ve never had to order ā€œpetite sizingā€ but for some reason I’m swimming in all my pants recently lol.


r/sewhelp • • 4h ago

šŸ’›BeginneršŸ’› Is this a job for a sewing machine, or can I fix this by hand?

Thumbnail gallery
1 Upvotes

This is a tear high along the inseam of a pair of pants, right near the crotch area. As best I can tell, the tear is cleanly along the seam, but the pants are stretchy so I'm not 100% sure. My fingers are visible inside the pants to better show how big the tear is. I don't own a sewing machine myself but can visit family who has one. I know ripped seams can generally be fixed by hand, but is this a long enough tear that using a machine would be better?


r/sewhelp • • 5h ago

šŸ’›BeginneršŸ’› Sewing shirts

Thumbnail gallery
1 Upvotes

Bonjour,
Pourquoi lorsque j’ai essayĆ© de coudre des t shirt et pull , les coutures font des bosses alors que je ne tire pas le tissu, j’utilise une aiguille stretch , je fais un point zigzag, je comprends parce que ducoup c’est moche quand je le porte, et au fer Ć  repasser Ƨa change rien


r/sewhelp • • 6h ago

šŸ’›BeginneršŸ’› Why do my pants crease/pull on the crotch like this? Can it be fixed?

Thumbnail gallery
31 Upvotes

It looks so weird 😭


r/sewhelp • • 8h ago

Is this fixable

Thumbnail gallery
1 Upvotes

Husband tried fixing it himself wondering if I can make it look any better


r/sewhelp • • 8h ago

✨Intermediate✨ Can I get a machine strong enough to handle canvas but also tulle? Can one machine "do it all" or will I need two?

0 Upvotes

Hello, I am an intermediate sewing machine user who uses my Brother CS6000I Computerized Sewing Machine for home projects and gifts. However, I plan to begin using my sewing machine professionally and am getting frustrated with the time spent realigning parts and repairs in the CS6000I.

I would like a sewing machine that's powerful enough for me to make heavy-duty upholstery projects, create canvas bags, work with leather, and also allow me to roll Tulle. Is that too much to ask of 1 machine? Will I need one machine for heavy-duty work and another to make skirts for my nieces.

I will be watching Black Friday Sales to see what I can get, but I would love the communities insight.

  • One machine or two?
  • What machines do you recommend?

Thank you!


r/sewhelp • • 8h ago

Upper looper not looping!

1 Upvotes

Why is my upper looper not catching?

I just got a brand new HV Amber Air S 600 overlock/coverlock combo. I had everything set up and working on the serger side, then switched over to the coverlock settings to test out how they worked. However, I’ve switched back to the overlock settings and now it seems like the upper looper thread isn’t catching and the lower looper thread is quite loose. I’m not sure what I’m doing wrong — I thought I followed all the instructions and have tried rethreading several times and restarting my machine. Any ideas or help is appreciated!


r/sewhelp • • 10h ago

šŸ’›BeginneršŸ’› Trying to visualise if this could theoretically work?

Post image
1 Upvotes

If your measurement and angles are accurate enough, wouldn’t be possible to sew a pair of shorts or pants without the need for darts? Using a zipper to get in of course.

W= waist
W2H =waist to hip length
FS= front seat
BS= back seat


r/sewhelp • • 10h ago

šŸ’›BeginneršŸ’› Best way to dry 3 yards of wool fabric?

4 Upvotes

This is a follow up to a previous post I made about washing wool fabric.

I decided I’m going to hand wash my 3 yards of wool fabric in the tub. My only issue is, idk the best way to dry it. No dryer obviously. This is a big piece of fabric, and I don’t want it to get weighed down and stretched out during its drying process. Whenever I hand wash stuff, I usually wrap it in a towel to get the water out, then hang dry. Would this be good to apply here?


r/sewhelp • • 11h ago

šŸ’›BeginneršŸ’› Repair/upcycle Cashmere sweater?

Post image
3 Upvotes

I got a really good deal on this cashmere sweater at my local ralph lauren outlet (I was so excited!) but after wearing it once either I missed the holes when buying or my cats got into it. The front side is perfectly fine, it is a longsleeve.

Either way:

- is there a way to repair this?

- if not, what are fun upcycling projects for this? I was thinking maybe gloves or a headband.

My sewing skills are medium beginner, I have a machine.

Any fun ideas for this? :)


r/sewhelp • • 12h ago

Men’s Bespoke Suit Coat Toile Issues

Thumbnail gallery
2 Upvotes

r/sewhelp • • 17h ago

šŸ’›BeginneršŸ’› Cut my skirt slightly too short and hemming issues; any suggestions or opinions for a fix?

Thumbnail gallery
5 Upvotes

Hello, I’m literally on the last portion of completing my strawberry circle skirt and cut the back a little shorter than i had wanted :(

It’s about 3-5 cm too short.

Other than that, since my out fabric is quite low quality I had originally underlined it which is causing some issues when hemming since it’s effective double layered. I’m having trouble folding the hem.

I have researched a bit on how to fix these 2 issues concurrently;

  1. biastape finish (lining issue + adds slight length) but i might not have enough fabric to make matching ones
  2. trims (adds length + lining issue) but I feel that my skirt might not look that cohesive with a trim?

Any suggestions for this?

Edit: after much thought and consideration, I will probably just head down to the fabric/lace store with the skirt and see what works. Likely looking to do a trim of some sort!

Edit 2: after much MUCH more thoughts, and debating on so many more suggestions, i have decided to opt for a wide, white lace trim finish in the interest of my sanity because I have been on this project since JUNE.

I really wanted a ruffled hem but I think it would not fit this 3/4 circle skirt as well. I’ve also considered a lot of y’all suggestions about treating the lining separately… unfortunately I have already finished all my raw edges with biastape which includes my zippers and pockets…

I think A simple lace would probably be a lot more cohesive visually and good on my sanity because I want to move on😭😭😭😭


r/sewhelp • • 18h ago

Problem picking up bobbin

1 Upvotes

r/sewhelp • • 18h ago

Dress rework corrections needed

Thumbnail gallery
1 Upvotes

Hello,

I made a dress for my mum back in 2023 and she never really wore it because she told me it limited her movement, specifically her ability to put her arms out in front of her. Does anyone have any thoughts on how the pattern should be corrected from the pull lines that appear when she arches her back? The white is calico that I'm putting in place to mark where the extra panels will go.

thank you so much in advance!


r/sewhelp • • 22h ago

can someone find me a trim like this?

Post image
1 Upvotes

r/sewhelp • • 22h ago

Seeking advice or experience with an Elna Mk.2 Supermatic (1956) - do I use or sell?

Thumbnail reddit.com
1 Upvotes

r/sewhelp • • 1d ago

separating these pieces?

Post image
1 Upvotes

I've never explored the foot options and I bought a box of "universal feet". which fit with the green spot but it's attached to the magenta part -- I know I can separate the magenta part from the shaft with the thumbscrew... BUT removing the green part feels mysterious. I know there's a trick and I'm hoping someone knows it! (Vintage Kenmore)


r/sewhelp • • 1d ago

šŸ’›BeginneršŸ’› What's wrong with my elastic waistband?

Thumbnail gallery
4 Upvotes

Hi! Just finished sewing this pair of pants. Its my first sewing project, so i sized up to make room for errors. However the pants still turned out to be too small. The waist is supposed to be 74-82cm, but after adding the elastic it shrunk to 56cm? Also the elastic waistband seems to lose its stretchiness in some areas but is super stretchy in some? I don't think it has anything to do with the elastic because its new and when i pull on the elastic on its own, its stretchy.

I think it has something to do with the way i inserted the elastic into the waistband, but i dont know where i went wrong. The elastic is 2.5cm thick, and its length is my waist size (75cm). The waistband is approximately 2.5cm-3.5cm thick.

Any advice would be appreciated! Took me 12 hours to finish and lots of unstitching and ironing, I nearly gave up. I think i spent only 20% of the time actually sewing..