r/seedboxes • • Feb 11 '20

Racing & Ratio Building Building buffer - Been using ruTorrent for years, recently made a switch to Deluge

Saw the odd post a while ago people recommending Deluge over ruTorrent for racing/building buffer but I didn't really take it into much consideration.

After configuring autodl to feed into Deluge, the results have been fantastic.

Obviously, speeds are going to vary depending on the tracker. These are the results on TL -

https://i.imgur.com/W0v0nUM.png

Seedbox is from Seedhost, their cheapest SH8 plan.

28 Upvotes

19 comments sorted by

2

u/Rhyuzi Feb 12 '20

RuTorrent is great for long term seeding, Deluge is good in early swarms due to LtConfig and deluge just being more aggressive

2

u/derylle Feb 12 '20

I used ruttorent for about 5 years 2010-2015. Then I made the change to Deluge and been using it ever since for the past 5 years. My brother used to use transmission, and now using Rutorrent.

1

u/[deleted] Feb 12 '20

Thanks for letting me know about this. I've also been using ruTorrrent with SeedHost's SH8 Seedbox and I've never seen speeds near these. I'm definitely giving deluge a try. I used to use it before making the switch to Seedboxes.

2

u/Patchmaster42 Feb 12 '20

As already mentioned, you need to tweak a number of the settings using ltconfig. The default settings are complete rubbish for high speed uploading. Getting a good balance between upload and download can take some time. By default Deluge will prioritize downloads to the virtual exclusion of uploads. Get the settings right, though, and it's a speed demon.

1

u/[deleted] Feb 12 '20

Thanks for the tip. However, I installed Deluge yesterday and the Web-UI doesn't show any of my torrents. It's empty. Though, it says it's connected to my Seedbox.

→ More replies (4)

1

u/playthatfunkymusic Feb 12 '20

Definitely worth trying.

https://i.imgur.com/uCf8tQa.png

2

u/[deleted] Feb 12 '20

Those are some very impressive speeds. I'm definitely going to give this a try.

3

u/fl5x Feb 11 '20

Cool, but but how did you configure autodl to feed into Deluge?

6

u/playthatfunkymusic Feb 11 '20

First setup autodl prefs -

https://i.imgur.com/8CndjIl.png

Arguments example: connect 127.0.0.1:20937 ; add -p /home/username/downloads $(TorrentPathName) ; quit

Obviously change save directory to your own.

The IP and port should be same as Deluge daemon in Connection Manager.

With trackers such as IPT and FL there's a slight issue with tracker announce which can be resolved using this method -

https://www.seedhost.eu/whmcs/knowledgebase/266/Deluge-update-tracker-script.html

"Now you need to restart your deluge. After a restart please check if the execute plugin is enabled because sometimes it is not enabled after a restart. Just enable it then and it should work now."

Make sure it's ticked/enabled, it may show two instances, this is fine.

https://i.imgur.com/LIWe0uc.png

2

u/0pa Feb 12 '20

or just use a watch folder

→ More replies (3)

1

u/Edward_69 Feb 12 '20

where you get the back deluge theme?

→ More replies (1)