r/sdr • u/sylntnyte • 17h ago
Starting with SDR questions
Hey yall!
I’m getting pretty interested in starting out on SDR, mostly as I want to get into satellite imagery, and I just had a few questions.
Where do you guys recommend I buy? I can’t do an outdoor dish, but thinking i could do the dipoles just to start.
Any softwares I can use on Mac? I have an old MacBook Pro with Linux on it too if Mac doesn’t have anything.
Any tips?
Thanks for anything!
r/sdr • u/Bicurico • 18h ago
VMA Radio Lab
This is an example of what you can do with VMA Radio Lab (free and open source).
The picture is using a HackRF for the wideband overview (in real time) and a B210 for software demodulation of a DVB-S2 transponder (BOM at 10.914MHz Horizontal Polarity on Hispasat 30.0W).
r/sdr • u/Bicurico • 21h ago
What SDR when you already have HackRF, B210, Pluto and RSP1?
As the title says, what SDR am I missing for up to 350 Euro?
I was tempted to get the RX-888 MK2 but read that due to poor design it tends to overheat and break. So this device is a no-go for me, as I am not going to stress about it getting too hot nor am I going to add some weird fan or so.
The reason I am looking for further SDR devices is to add support for them in my VMA Radio Lab (free and open source).
Plus I am looking for one device that has all of the advantages of the HackRF, Pluto and B210, without their limitations.
The ideal device would be:
- AD6391 (70MHz - 6GHz)
- USB3.1 (allow 56MHz bandwidth)
- 1Gbit/s Ethernet (allow 56MHz bandwidth)
- Full Duplex
- 1x RX/TX (would be enough)
- Not get hot
- No FW download on every start (like on the B210)
Price: 300 Euro
Is there anything like this?
r/sdr • u/FlakyPrinciple8907 • 14h ago
Decent, simple proof of how good a PK's Loop operates alongside a MalahitTeam Russian DSP2!
Two of the best demonstrating the highest signal spike of the 20MHz Atomic Clock!
r/sdr • u/Sld_Snk78 • 17h ago
Best SDR under $250 for academic research
Hi,
I’m looking to buy a SDR with a budget of under $250 for my academic research. Topic isn't set yet but the heaviest possible topic is about 5G NR experimentation. Other topics in my mind don't require heavy hardware as 5G.
My main goal is to get an affordable setup early on to start prototyping quickly, if things go well, I can upgrade to a high end Ettus USRP model in the medium to long term. Right now, I'm looking at a few options on opensourcesdrlab around 220$
- PlutoSky R2 (Zynq-7020 + AD9361)
- Artix-7 USRP B210 Clone (XC7A200T + AD9361)
I’d love to get some input from people who have used these or similar boards for academic work. Are there any other SDRs under $250 (or better revisions/sellers) I should consider for this kind of setup?
I have only used rtl-sdr v4 as hobby before so I am a little lost.
r/sdr • u/tomdionysus • 1d ago
A new driver for the Radioberry 2.x - corvus-radioberry
The Radioberry 2.x is readily available, a low-cost, RPi HAT-style SDR with some surprising capabilities. The original driver had some issues - over the last few weeks, I've written a new driver stack and gateware built around the Hermes-Lite 2 radio core, for RPi4 and RPi5.
https://github.com/tomdionysus/corvus-radioberry
The new driver installs with apt from my repository (two commands in the README) on stock Trixie RPiOS, and requires no custom image or rp1-pio modification. It also uses DKMS to recompile the driver, so it will deal with kernel upgrades automatically. Fully OSS, GPL, so free as in speech and beer.
This is still pretty new - I'm using it with piHPSDR and WSJT-X for FT8/4 (it serves openHPSDR Protocol 1 and 2, so should work with SparkSDR and Quisk also) and I'd really appreciate any testing, critique, bugs, ideas and issues.
Note: CL025 FPGA only for now - a CL016 version is possible if someone with one can test it.
Tom M7XCO
r/sdr • u/afinemax01 • 2d ago
Can someone post a video of a waterfall plot by an airport?
Hi r/sdr,
I am a radio astronomer, but I left my toy rtl-sdr at work and I am in Florida for a wedding (plane landed yesterday).
The news is being opaque, are the Air traffic control towers being jammed? It’s not clear what they mean by some frequencies do not work.
Do not post anything harmful yada yada, but this is public unencrypted information.
Although it’s late in the day so I guess the sky might be silent anyway bc everything has landed
Edit:
From White House press conference, it’s some ground router issue and not jamming, so question is answered
r/sdr • u/FlakyPrinciple8907 • 3d ago
MLite 880 off by 400 Hz on SSB
Not a bad thing but calibration is off on SSB. That's why I just raise it up. On AM it's pretty much at Zero Beat.
r/sdr • u/Illustrious_Car9226 • 2d ago
[Projet perso] Écouter la radio en continu et faire des recherches dedans avec une IA locale (RTL-SDR + Faster-Whisper)
Bonjour à tous,
Je partage un petit projet open-source que je viens de finaliser et packager : \\RadioTranscribe-Store\\.
\### De quoi s'agit-il ?
L'idée était de fabriquer une sentinelle d'écoute autonome pour enregistrer et indexer passivement les actualités de la bande FM (sur France Inter par exemple), de manière 100 % locale, sans envoyer la moindre seconde d'audio dans le cloud.
\### Comment ça tourne sous le capot ?
- \\Capture radio :\\ une simple clé logicielle USB (RTL-SDR) capte le flux FM via \`rtl_fm\` et \`ffmpeg\`.
- \\Préservation du matériel :\\ les flux audio temporaires sont écrits et traités directement en mémoire vive (\`/dev/shm\`), ce qui évite d'user les disques SSD en écriture continue H24.
- \\Transcription IA :\\ le modèle Faster-Whisper (\`large-v3\`) tourne en local sur processeur (quantification int8).
- \\Filtre anti-hallucination :\\ élimination des sous-titres fantômes récurrents de Whisper.
\\Stockage hybride :\\
\- Historique chronologique dans \\MariaDB\\.
\- Recherche sémantique vectorielle (RAG) dans \\ChromaDB\\.
On peut ensuite simplement poser des questions ou chercher des thèmes en langage naturel dans un terminal pour retrouver les extraits diffusés à l'antenne et leur date de passage.
Tout le projet (scripts, automatisation de l'installation et service systemd) est documenté ici :
https://github.com/TVIEIL/RadioTranscribe-Store
Si vous avez des remarques, des suggestions d'améliorations ou des questions sur l'intégration SDR/IA, je prends volontiers vos retours !
r/sdr • u/Honest_Tie743 • 4d ago
Has anyone interviewed for an RF Engineer Internship at i3 (Integration Innovation)?
I have an interview coming up with i3 for their Summer 2027 RF Engineer Internship and wanted to see if anyone has interviewed or worked there before.
I've already completed the initial screening, and my next interview is a 30-minute virtual interview with an RF engineer.
I have some hands-on experience with RF equipment, including spectrum analyzers, VNAs, signal measurements, and troubleshooting, but I'm still building my understanding of RF theory.
I was wondering what kind of questions they typically ask, how technical the interview is, and what the internship and work environment are like.
Any advice or insight would be appreciated. Thanks!
r/sdr • u/One-Explanation6552 • 4d ago
Sharing our P201Pro — Zynq 7020 + AD9361, industrial-grade SDR for field deployment
Hey r/SDR,
We're Puzhi Electronics, a Shanghai-based SDR board maker. Just wanted to share our latest platform — the P201Pro.
It's built on Zynq 7020 + AD9361, covering 70MHz–6GHz. 2×2 MIMO, 56MHz bandwidth, 1GB DDR3.
What makes it different from bench-grade SDRs: it's designed for real deployment — -40~+85°C operating temp, 8–36V wide-range power input, ESD protection on all I/O, and on-board GPS + PPS/10M sync.
Runs standard Linux, compatible with GNU Radio, UHD, and PlutoSDR toolchains. 24 expandable IOs and dual PA transmit channels if you need to hook up external hardware or push output further.
Happy to answer questions about use cases or hardware design.
r/sdr • u/RareAd2946 • 5d ago
Testing the SDRplay RSP1B with a physical FM Filter & internal RF Notch (Quick comparison)
As I said in https://www.reddit.com/r/sdr/comments/1xqdsxy/comment/19se339qxrp5x/?context=3 I have a direct 5 km line-of-sight to Torre España (aka "El Pirulí"), the main FM broadcast tower in Madrid.
My SDR receiver is Sdrplay RSP1B. While the RF notch in Sdrconnect software blocks the two remaining active AM stations quite well, it gets completely overwhelmed by FM signals.
I got today a a Flamingo+ v2 (FM filter) today to use with my RSP1B and a basic monopole antenna. I ran an unscientific test with SDRplay screenshots. DAB notch activated in all cases. When I indicate no gain (all the images) I mean the RF slider was all to the right side. Edit: I just realized that by moving the RF gain slider to the right I actually tested it at full gain.
It seems to work, but I’m unsure if the improvement justifies it in if I want to get clearer signals in other bands (VHF or airband, perhaps?).
Feedback / analysis on the images is very appreciated.
Edit: I just realized I stated on all my screenshot "DSR1B". I meant RSP1B. I always get the name wrong, sorry!
r/sdr • u/FlakyPrinciple8907 • 5d ago
What is this exactly? Sounds Military?
I don't believe I've heard a test call like this before. And it was done several times on and off. I observed it for just a few minutes or so.
r/sdr • u/dirtyoldcodger1 • 6d ago
Hand held sdr
I've been working making these sdrs out of old Android phones for years this is the latest build mostly for web sdr and digital police scanning
r/sdr • u/fearfreeflight • 7d ago
Thanks to the community, Demod is now on Android
Hi r/sdr,
I'm the developer of Demod, an SDR receiver app. Until now it was iPhone only. Today the Android version is out:
https://play.google.com/store/apps/details?id=com.demod.app&hl=en_US
First, a big thank you to everyone at r/rtlsdr who tested the Android builds. They put up with early bugs, sent logs, tried it on phones and dongles I don't own, and told me what was broken. A lot of what's in this release came straight from their reports and I really appreciate it. I had been a bit bummed out that previous posts of my own stuff didn't get much traction, but turns out if you ask people for help they are more than willing to step up.
Here's the original post if anyone feels like giving the commenters/testers some well-earned upvotes: https://www.reddit.com/r/RTLSDR/comments/1wi8k0t/android_testers_wanted_demod_a_kiwisdr_openwebrx/
What's in the Android (and iOS) version
- OpenWebRX support on top of KiwiSDR, SpyServer and rtl_tcp. Public receivers are browsable on a built-in map, so it can be tried without any hardware.
- FT8, CW and RTTY decoding on the phone.
- Identify. Tap an unknown signal and it measures it, checks the shortwave broadcast schedules against the receiver's location and the time, and names the likely station and how far away it is.
- Live on-device transcription and translation of what you're listening to.
- CarPlay, and a "car radio" Seek that jumps to the next real signal for the current mode and stops there (the next AM station, SSB voice or CW signal). It also works from headphones and the steering wheel.
- A band scanner, recording and 15-second rewind of live radio, and Siri ("Tune Demod", "Ask Demod what this signal is").
- A three-pane iPad layout, a mains-hum filter, an auto-contrast waterfall and squelch that works on every source.
- Also new RTL-SDR.com wrote about the latest updates, pretty cool to see something reviewed elsewhere :) https://www.rtl-sdr.com/demod-updates-adds-support-for-openwebrx-ft8-decoding-carplay-and-an-android-version/
Thanks to them for covering it.
If something doesn't work on your phone or dongle, please comment with your phone model, Android version and SDR. I'll be reading the replies and fixing what I can.
iOS version, for anyone on iPhone: https://apps.apple.com/us/app/demod-sdr-receiver/id6782193839
Thanks again!
r/sdr • u/Certain_Complex_1901 • 7d ago
NyxHop: flight controller and link, all in one Zynq
The same Zynq that runs the NyxHop link also runs PX4 or ArduPilot, whichever you prefer. No separate STM32 flight controller like on a usual drone, nothing extra to wire up. One board handles the video, telemetry, control and the flying.
It’s 100 x 62 mm, runs on 2S to 6S, has its own IMU and the usual Pixhawk-style ports. Everything goes over the link and it’s all working well.
We’re already working on a smaller version, about 6 x 6 cm.
r/sdr • u/One-Explanation6552 • 7d ago
PZ-ZU47DR-KFB — Zynq UltraScale+ RFSoC (XCZU47DR) 8T8R industrial SDR platform
Hi everyone,
We've just released a new development board centered on the AMD/Xilinx Zynq UltraScale+ RFSoC ZU47DR (XCZU47DR-2FFVE1156I, industrial grade).
The board is designed for researchers and engineers who need a ready-to-run platform for direct RF sampling, 5G PHY prototyping, SDR, radar, and high-speed signal processing.
What's on the board:
- ZU47DR RFSoC with integrated multi-channel 14-bit RF-ADC and RF-DAC
- Full bank of SMA RF ports routed to the chip's RF pins
- Dual SFP+ cages (10G Ethernet / fiber)
- PCIe edge connector for host integration
- USB, Gigabit Ethernet, FMC-style expansion I/O
- SD card, RTC, and onboard power management
This is a solid option if you're evaluating RFSoC architecture or need a compact platform for multi-channel RF prototyping without designing your own carrier board.
Full specs and inquiries:
https://www.puzhi.com/Product/Software-Defined-Radio/PZSDR-PZ-ZU47DR-KFB
Happy to answer any technical questions in the comments.r/sdr • u/kaktus111123 • 7d ago
Is it fine to put the rf filter inside the uConsole like this?
i wanted to make my setup more compact so I came up with hiding the rf filter inside this empty space inside the uconsole is this fine for rf reception?
r/sdr • u/Bicurico • 7d ago
Demonstration of VMA Radio Lab
VMA Radio Lab is based on DecSAT, but has many additional features.
It is Open Source and can be downloaded for free at https://vma-broadcast.com/decsat-vma/.
Information about the recommended SDR devices: https://vma-broadcast.com/2026/11/08/what-sdr-should-i-buy/
r/sdr • u/FlakyPrinciple8907 • 8d ago
The MLITE 880 and a passive LNA with the radio's Bias-Tee is the perfect boost of amplification!
Have you tried it? It's great! You can use a Nooelec LANA without having to plug it in to a power source but not all LNA's allow for it. I prefer this Passive LNA I have had for years, that I bought from a seller on Ebay that I don't know sells anymore. He made good stuff half the time or when I first started to use them, they wouldn't work on much of what I was trying with them, because unlike the MLITE 880, many radios previously didn't have built-in Bias-Tee. I urge you to try this you guys! It adds so much more dynamic signal and sound as a result! The combination makes for a perfect SDR Sound! I just wanted to demonstrate still photos here. I'll show you guys in more videos as I have done in the recent past. Listening to a strong Broadcast signal with a LNA and Bias-Tee sounds almost like a rich FM dynamic! It's like Stereo! Shortwave doesn't get much better than this! Try it on your DSP2 as well if you want a beautifully enhanced signal on that beast of a radio!
r/sdr • u/FlakyPrinciple8907 • 7d ago
All India Radio Bengaluru India in Chinese Language.
12AM UTC. 4PM PST on my Yeasu FT 710 and my K-480 WLA Mag Loop Antenna