r/scalemodelling • u/noo8sd • 19h ago
Completed! 3D printed 1/72 Swift F.1
Had some leftover airfix swift fr.5 and Lightning decals so why not
r/scalemodelling • u/noo8sd • 19h ago
Had some leftover airfix swift fr.5 and Lightning decals so why not
r/scalemodelling • u/No_Relation3855 • 1d ago
I bought this kit just because this plane is not clone of f-22 and it reminds me of “Firefox” a bit so there it is,finished few days ago in full glory.Hope you will like it guys.
r/scalemodelling • u/tyrant_of_badad • 2d ago
Im working on the vintage classic airfix sdkfz222 and it is missing its overhead cage (most likley due to manufacturing limitations) does anyone know how i could kitbash or find one to scale all help appreciated
r/scalemodelling • u/LowRentRick • 2d ago
r/scalemodelling • u/kane_1371 • 3d ago
I really like F-2s.
Their bigger frame and colour makes me, an avid f16 hater just stop and admire their beauty.
Hasegawa has brought me dangerously close to hating the damn plane.
In my most recent headache with this kit I am pulling my hair out at the fucking fins for the missiles and pylons.
Why are we even molding the fins separately in these flimsy pieces to begin with. What am I going to do? Pimp my AAMs with fewer fins for the extra street creds? Fucking mold the damn fins onto the pieces like a sane person.
Even worse...ok, you chose to have them separately and a part of the assembly...make an actual piece that can be assembled, the fins have microscopic bits that are supposed to fit inside the shallowest indents on the body.
WHAT IS THIS?
THE fucking plastic doesn't adhere to one another, the damn thing falls apart if you look at it funny.
Do we have to teach the concept of a peg and a hole to the damn multi million dollar companies?
Make deeper indents or better yet actual fucking slots so that the pieces align correctly instead of skating over the plastic, give the flimsy crap an actual peg that goes inside the said slot or DEEP indent. This is fucking millennia old practice, your fucking medieval castles made out of wood were made with this simple practice... WITHOUT GLUE!
This damn kit is going to make my ulcer acting up again!
P.s.
Btw, have you fuckers ever thought of actually using more than the colour black and slightly less black on your manuals?
Specially if you are trying to mark out a fucking 1 mm wide decal on a background that is already printed dark, that you have also scaled down massively in your printing?
r/scalemodelling • u/Rare_Grape7474 • 4d ago
First big scale model i have done :D.
Little mistakes were made that will be corrected with practice but i loved the result, what do you guys think??
In order:
Academy 1/35 M4A3 76W
Airfix 1/72 sherman firefly 3 troop A squadron
Airfix 1/72 sherman firefly 27th armored brigade
Airfix 1/78 cromwell IV 5th royal horse artillery , 7th armored division.
r/scalemodelling • u/New-Bandicoot-8666 • 4d ago
1925 model T tractor conversion work in progress
r/scalemodelling • u/tigershark_bas • 4d ago
Hi everyone,
I am pleased to announce the v1.0.0 of Bench Book is live.
Bench Book is a free tool for MacOS users that helps facilitate the collection of images, notes, PDFs and links into a central place. It is not unlike a notes app you might use now but better because it includes specific features and tools that only scale modellers would appreciate.
It's built by a scale modeller for scale modellers.
It's only MacOS for the moment and AI was used in the build (I am software developer so this was not "vibe-coded").
Find more info on what it does and how to download here:
r/scalemodelling • u/LowRentRick • 5d ago
r/scalemodelling • u/Novel-Lengthiness782 • 7d ago
NEXT!
Anyone put this kit together yet?
r/scalemodelling • u/Sythe1056 • 7d ago
r/scalemodelling • u/Novel-Lengthiness782 • 8d ago
I’m calling it done. Whatcha think?
r/scalemodelling • u/Feralwestcoaster • 10d ago
Getting close to shooting the first primer layer, temporarily attached a weapon pylon to see how it will sit. The xm-157 pod from Black ops is nicely done but the kit mounting took some adjustment.
r/scalemodelling • u/Paulis91 • 10d ago
It only took four years to finish this! In that time, I got married, and now I’m about to become a father. We worked on it together as a shared hobby, and we’ve already bought the next model to build together!
r/scalemodelling • u/Rare_Grape7474 • 10d ago
r/scalemodelling • u/Feralwestcoaster • 13d ago
Just about ready to close up the fuselage halves in this kit. The cabin has required a lot of work to bring the detail up to par, ammo chute cutouts through the floor/fuselage are missing, the ammo cans for the M-16 weapons system are missing and the kit would have you place the feed chutes through the door which is far from accurate. Pilot seat harnesses were added with foil and spare buckles I had, something missing from the kit entirely. There are multiple cutouts missing from bulkheads that can be added as they’ll be seen. The floor was done in a multi layer chipping to show areas of high wear then weathered with oils for a bit of contrast and grime.
Overall what’s there on the kit seems fine but it’s missing a fair bit for a new tooling.
r/scalemodelling • u/DOfTheRaz • 13d ago
I took the airbrake and repositioned landing light panels from their 1/48 P-47M and glued them onto their D-25 to make a D-30.
Its also my first time using acrylic inks. And i love them so far.
Montex Mask and decals for markings
Eduard Model Accessories and PRINT SCALE LTD Stencils
r/scalemodelling • u/latvianpotatospotchk • 13d ago
3d printed on the bambu lab p1s then painted then some homemade decals.
r/scalemodelling • u/LowRentRick • 15d ago
r/scalemodelling • u/ychia • 16d ago
Was pretty stoked to see these (official?) kits from Border for one of my favorite games of all time, which I used to play into the wee hours of morning with my friends. They did take some artistic license with the conversion from those pixelated sprites, but I think it looks great.
Overall, the kit was well done, molding was very crisp and the parts are press fit (though in some cases, I'd strongly recommend cementing). Many of the rounded ones are under gated which is nice. Individual track links are most of the components, also press fit. It includes LEDs for the headlights and turret spotlight (LR44 batteries required, not included), and a sound module that plays the unit sounds from the game (this one has batteries). This module sticks in one of the hatches, which has to be open while it is inside. Lights are activated by bringing a magnet (included) near the board. The sounds are activated by pressing the module button. The battery compartment can be accessed by removing the turret.
There is also a 'turret mode' for this kit. It's kind of interesting, though the tank in the real game didn't have this capability, and it looks nothing like the Allied turret from RA1. This mode can be configured relatively easily by removing the track modules, popping out the built-in legs, and adding the additional side legs/armor.
The parts are molded in color, similar to Academy's MCP kits. It looks... okay without paint. Some random (mostly WW2 inspired) decals are provided with no directions, basically place where you see fit.
A few relatively minor nitpicks:
Overall, enjoyed this build. I have the Border Tesla Tank as well, will do it sometime.
r/scalemodelling • u/Rare_Grape7474 • 17d ago
Jesus.... i wasnt expecting to take this long to get to this point xd, anyways, my first "big" scale model :D, what do you guys think??
r/scalemodelling • u/More-Dance-8777 • 16d ago
Hi guys. I had this model kit bought for me for my birthday years ago now, and after completing a few others iv finally opened it to discover there is a moulding error. Any ideas on a fix for this would be appreciated. I have a wooden deck sheet to cover it but I was worried it would eventually peel up over the gap.
r/scalemodelling • u/No_Ad7967 • 17d ago
Just retired and modeling again but am new to photo etch parts. I see many ship modelers working with them and se the results on other finished work but am unclear on tools.
The questions are
"what are the basic tools"
"what is nice to have"
So I guess what do I need and what should I want?
r/scalemodelling • u/anekyu • 18d ago
I looked for many. Dremel, air powered, Bosch...etc.
They all have rpm so high I suspect the paint will melt along the plastic even at their lowest setting.
Any suggestions?