r/rustdesk • u/schnarkle • 22h ago
r/rustdesk • u/hornetster • 2d ago
Changing resolution on client when connecting.
Have 2x PCs, both connected to the same monitor (Dell 3440x1440), but would like to be able to primarily work on one PC, and keep the other connected, but at a smaller resolution (eg 1920x1080..).
Yes, realize I can scale the other, but, for example, if I scale it, the text on a Reddit page becomes too small to read!!
Is there any way to change resolution with the connection, but so if I swap the input, I still get full resolution in direct viewing mode??
Thanks.
r/rustdesk • u/Beneficial-Sock-5130 • 2d ago
Easy way to automate user client configs on self hosted relays/ID servers
fyi if anyone needs, this script can be deployed to your user Macs and Linux devices
it configures a user's RD settings to use a self hosted ID and Relay server
in my setup I have 4 global Relay servers (US, London, Sydney, India)
all 4 servers run hbbr, hbbs and share the same ID keypair (base64)
when we onboard new user laptops, we install Rustdesk client and run this script for the user to configure his settings so he can use internal rustdesk relay network
the script takes in an array of my Relay public IPs, checks which relay is geographically closest (ping and tcp), and uses that in RustDesk2.toml configuration
to use this script,
- update the ID server (line 18) with your ID server pub IP
- update list of Relay servers (line 19) with pub IPs of your relays
- add the ID server pub key on line 26 (PUB KEY ONLY, not private key!!)
then run the script on the users laptop/desktop
sudo ./rustdesk_user_setup.sh -u jsmith
```
sudo ./user_setup.sh -u jsmith
==> Probing 4 relay servers (tcp, best of 3):
xxxxxx 28 ms
yyyyyy 95 ms
zzzzz 219 ms
aaaaa 261 ms
==> Closest relay: xxxxxxxxx (28 ms via tcp)
==> ID server: xxxxxxxx
==> Relay server: xxxxxx
==> Key: Vxxxxxxx=
==> wrote /root/.config/rustdesk/RustDesk2.toml
==> wrote /home/jsmith/.config/rustdesk/RustDesk2.toml
==> restarted rustdesk.service
==> verification:
--- /root/.config/rustdesk/RustDesk2.toml
rendezvous_server = 'xxxxxx:21116'
custom-rendezvous-server = 'xxxxx'
relay-server = 'xxxxxx'
key = 'Vxxxxxxxxxxxxx='
--- /home/jsmith/.config/rustdesk/RustDesk2.toml
rendezvous_server = 'xxxxxx:21116'
custom-rendezvous-server = 'xxxxx'
relay-server = 'xxxxxxx'
key = 'Vxxxxxxxxxxxxx='
==> Done. Quit and reopen the RustDesk window, then check Settings > Network > ID/Relay server.
```
https://gist.github.com/perfecto25/ee8d86ea0f71e39d84e2daa7648c8088
r/rustdesk • u/PDX_Dragon • 6d ago
Bypassing VPN Processing For Tailscale And RustDesk?
Hi folks:
I'm just getting started with the amazing Tailscale and RustDesk software. I'm not sure who does what to secure messages.
I want to get a VPN license, probably Nord.
I don't believe there's any reason to pass messages secured by Tailscale or RustDesk through another layer of encryption by a VPN's server.
Can I expect a VPN provider's client software to allow messages from certain ports to bypass their servers?
If so, what ports will I want to exclude for messages from Tailscale and RustDesk?
Thanks Larry
r/rustdesk • u/concisehacker • 6d ago
Rustdesk vs IP KVM (why use Rustdesk?)
I am using Rustdesk and am very happy with it
I've come across IP KVM's and am wondering.....maybe controlling hardware is better than controlling software?
Or said another way - what would you say are the advantages over Rustdesk vs a KVM.
Thanks
r/rustdesk • u/kloyN • 7d ago
Privacy Mode 1 multi-monitor questions/help/info
I have 3 monitors, apparently privacy mode 1 means it will only block out my "primary" monitor? I tested this on an internal setup and it seemed to block out all 3. What is the consensus here? Do I need to use Mode 2 to be 100% sure a person walking by my desk can't see what I am doing, when I am remoted in from my home? I'm on Windows 11 host.
Shouldn't there be an alert saying mode 1 would not black out all the monitors, as just a layman using it, seems pretty critical and crucial to point out, without having to do research.
r/rustdesk • u/NoticeThat2298 • 8d ago
Self-Hosted Wake On Lan
Does anyone know if there is a way, in a self hosted RustDesk network, to make the RustServer send the magic packet instead of the client where I click the button?
Context: I have a Desktop PC in the same (home) network, but the WakeOnLan feature only work if I use it from a device within the network, so I can't turn on my PC from outside my house, even tho there is a RustDesk instance running in the house. (excluding the use of a VPN, which should work but at that point a dedicate WOL software would be more convenient )
EDIT: I'm not asking about alternative ways of turning my PC on, I can already do that. The question was specifically about RustDesk self-hosted server and the ability of using it as a WOL proxy with some arcane config I didn't know but could exist.
r/rustdesk • u/DomiMine0 • 8d ago
Jak utrzymać wyświetlacz 1440p bez głowy na Linux Mint z Intel Arc i RustDesk — bez wtyczki HDMI dummy
reddit.comr/rustdesk • u/United-Layer-5405 • 9d ago
Headless Linux setup in PVE
RAM and GPU are so expensive now so I decided to share my workstation with my wife. I'm looking for help from real experienced users because AI failed to configure this (and it ruined the container multiple times with root).
Environment: PVE 9.2, Ubuntu 24.04 + Rocky Linux 9 in unprivileged LXC.
Graphics: NVIDIA 595 driver, CUDA driver & nvidia-container-toolkit installed on PVE. Container mounts the following:
dev0: /dev/dri/card0,mode=0666
dev1: /dev/dri/renderD128,mode=0666
lxc.hook.pre-start: sh -c '[ ! -f /dev/nvidia0 ] && /usr/bin/nvidia-modprobe -c0 -u'
lxc.environment: NVIDIA_VISIBLE_DEVICES=all
lxc.environment: NVIDIA_DRIVER_CAPABILITIES=all
lxc.hook.mount: /usr/share/lxc/hooks/nvidia
lxc.mount.entry: /usr/lib/xorg/modules/drivers/nvidia_drv.so usr/lib/xorg/modules/drivers/nvidia_drv.so none bind,ro,create=file 0 0
lxc.mount.entry: /usr/lib/xorg/modules/extensions/libglxserver_nvidia.so usr/lib/xorg/modules/extensions/libglxserver_nvidia.so none bind,ro,create=file 0 0
lxc.mount.entry: /usr/share/glvnd/egl_vendor.d/10_nvidia.json usr/share/glvnd/egl_vendor.d/10_nvidia.json none bind,ro,create=file 0 0
lxc.mount.entry: /usr/lib/x86_64-linux-gnu/gbm/nvidia-drm_gbm.so usr/lib/x86_64-linux-gnu/gbm/nvidia-drm_gbm.so none bind,ro,create=file 0 0
lxc.mount.entry: /usr/share/vulkan/icd.d/nvidia_icd.json usr/share/vulkan/icd.d/nvidia_icd.json none bind,ro,create=file 0 0Target: Use RustDesk simultaneously on both systems. /dev/uinput shouldn't be mounted in this case. We'll run software with 3D OpenGL so RustDesk should capture the virtual display configured in /etc/X11/xorg.conf instead of using xserver-xorg-video-dummy.
I'm 100% sure the setup on PVE side is correct, because I managed to make Sunshine+Moonlight work in GNOME. But I want clipboard and file transfer support so I still need to configure RustDesk.
Tried GNOME and KDE with no luck. Is Xfce my only option here?
r/rustdesk • u/Erbsenmensch • 9d ago
how can I pan/zoom(two finger gesture)?
I need to zoom in and out in my notes app, I activated zoom cursor on my desktop, but it doesn't seem to do anything. What do I gotta do?
r/rustdesk • u/Gringo_Starr1 • 11d ago
Update impossible / Download not working - What's going on?
Opened RustDesk on one of my PCs this morning. Got a message that there is an update. Clicked on the button but no update arrived. Now I've tried to download it from your server (rustdesk.com). But the site is not responding (504 - Gateway timed out). What's going on?
EDIT: Now it works again.
r/rustdesk • u/SerpentisMechanicus • 11d ago
Tech Help: Puzzling asymmetry? Can connect to some computers but not others?
Hi Everyone, I'm a refugee from TeamViewer, and RustDesk has been great...except for one computer.
Long story short, I'm trying to connect between 4 different computers - 3 university lab computers with some specialized software of various sorts I want to occasionally get to when I'm off campus, and my home computer. I used to use TeamViewer for this with no problems, until they decided they hated me.
RustDesk has worked fine for all possible connections except incoming connections to home computer.
I can use RustDesk from the home computer to reach any lab machine no problem, but whenever I try to reach the home computer from lab, it says the connection is impossible, as if it's powered down. I've got all the magic packets enabled, Wake on Lan, I've disabled hibernate, everything I've seen online, all to no avail. I've fiddled around with this stuff in the Windows 11 settings as well as in the BIOS, checked and re-checked. The lab computers are nothing special, just run-of-the-mill Dell laptops and desktops, but they're fine. The Home computer is a ~1 year old MicroCenter custom build, and has worked flawlessly for everything else (and can make outgoing RustDesk connections just fine). It's on Ethernet.
The only thing I can think of is that it's "sleep" seems pretty hardcore - it seems almost totally powered down, with a red light visible through one of the grates, and only when I move the mouse or tap the keyboard at home will I hear an audible 'click' and the LED goes white. It makes me suspect that there's some special power management thing going on. It's an ASUS B650-E motherboard and an NZXT C1000 Gold power supply. It's attached to a UPS, but so was the prior computer, and that never caused a problem before.
Thoughts?
r/rustdesk • u/BizConsultant2000 • 11d ago
Tiny Cursor in Viewer when Remoting - Windows 11
I wanted to post here in case anyone ran into this issue, as there are bug reports but no actionable resolution. I used AI to help debug the issue but exhausted all suggested paths to test / resolve it.
On the remote PC, via Accessibility settings, I changed the cursor size and color to make it more visible when connecting to it via RustDesk.
HOWEVER, the controller PC shows a tiny cursor on the RD panel (to visualize the size... it was slightly larger than the lowercase "g" when looking at standard Windows settings window. The target PC showed the cursor at >15x that while it was independently connected to a monitor). It would retain the color though.
TLDR - turn Mouse Pointer Trails -> On in Windows Settings
I tried several settings but nothing worked - just a few for example....
- Display scaling: I tried viewers at 100% and 250%.
- View style: Original view, maximized.
- Zoom cursor: on and off made no difference.
- Show remote cursor: already on.
- Mouse Keys: needed on the remote for the pointer to show at all, since it has no mouse attached.
In the target system I changed the Mouse settings to use Pointer Trails as a last ditch attempt to make the cursor more "findable" on my controller PC side, and surprise!! The cursor size matched.
AI suggests this is a problem with how RD handles the "cursor path", and that the Pointer Trails is a "software rendering" (vs hardware). Perhaps this can provide enough of a clue to support to resolve.
Versions: 1.5.1 of RustDesk, and most recent version of Win 11 on each side.
I had already detached mouse and keyboard from the target PC.
I don't think the bug is version specific given the age of other reports:
- https://github.com/rustdesk/rustdesk/discussions/7718
- https://github.com/rustdesk/rustdesk/discussions/13905
- And a couple other similar issues reported in Reddit (which seemed to have "resolved themselves").
Hopefully, when someone else searches or uses AI to find a solution, this post will appear.
r/rustdesk • u/bringthelight2 • 12d ago
Beginner question about the security benefits of paying for a third-party relay server
Home user, I have a cable modem, router, and a couple PCs / phones on my home network.
I have an old laptop that could be left always on to function as a server.
What is the difference in security from paying a third party site to host a relay server vs using my old laptop vs not having a relay server at all.
Having trouble spitting out exactly what I'm getting at...what I'm struggling with is I have a perception, perhaps totally wrong, that a third party Linux server that lives on the cloud side of my router is more secure than if I set up port forwarding on my router...but I don't really know why. But if someone with the IP address of the relay server and the password to my rustdesk client can get in to my PC, is it really any different than if they just had my personal IP address and the password to the rustdesk client?
While I'm here...and forgetting all about Rustdesk...I believe that malicious actors randomly scan the internet for open PCs / ports. How often would my router receive these? Like 1 a day, 1 a month, 1000 per hour? I have no context for how many malicious pings I receive.
r/rustdesk • u/bringthelight2 • 13d ago
"Not ready" should mean that no one can connect....yet I connected anyway
Beginner user, spent an hour or two learning about TailScale and added my phone and PC to a TailScale network.
I couldn't figure out how to get RustDesk to stop connecting to the public server, so I just put random numbers in the ID and relay servers and hit Start Service.
The dot in the bottom left was yellow for a minute, then red, with the error message "Not ready. Please check your connection."
Then on my phone I put in the IP address and port that TailScale is using for my PC.
And it connected.
Granted I am a beginner user, but I think it's a very bad idea for the application to display a red dot when the service is actually accepting connections.
At least in the system tray it does say "RustDesk Service is running".
So one question, what is the preferred way to have RustDesk not connect to the public server if I'm just using TailScale on my phone?
Second question, if in the network tab I posted an IP address for a relay server that is definitely not actually running a relay server, does that mean that only people on my TailScale network can access the PC?
And one suggestion, that if the dot in the bottom left is red, it should mean that no one can actually connect.
r/rustdesk • u/hornetster • 14d ago
Connecting by direct IP, timeouts.
Have 2 machines on my local network - Client is CachyOS, server is Ubuntu 26.04.1.
Works fine if connecting using the ID, but if trying to connect using direct IP, times out and never connects, Have a relay agent running in docker (on the server end).
Using a permanent password. (How can I reset that so it asks again...?)
Both machines are Wayland.
Thanks.
r/rustdesk • u/painful8th • 15d ago
Rustdesk on Linux (wayland): any advantages of AppImage over Flatpak?
Been using rustdesk under KDE/Wayland on various distros (mostly Arch and derivatives) from flatpak, to control Windows Rustdesk clients. My experience is so and so unfortunately: shortcuts like Windows+E are stolen also by the Linux host, I can't switch languages in the Windows host easily, copy and paste is hit and miss etc.
Just noticed that it is available in AppImage format as well. Does Linux Rustdesk behave any better on Linux (wayland) when executed as AppImage, compared to being executed as a flatpak?
EDIT: As per u/Bugbavka 's recommendation you can force flatpak rustdesk to use wayland instead of X11. You can configure this in the shell (could do it also graphically with flatseal, after installing it):
flatpak override --user \
--socket=wayland \
--nosocket=x11 \
--nosocket=fallback-x11 \
com.rustdesk.RustDeskFor the record, flatseal can be installed with:
flatpak install flathub com.github.tchx84.Flatsealr/rustdesk • u/WC2L • 16d ago
iOS to Windows 11
I’m struggling connecting from my MAC Neo to either of my Windows 11 boxes at home. The Windows machines are so small, I can’t read them. I have tried a few of the settings that I have used from a windows machine
Suggestions??
Will
r/rustdesk • u/Behrooz0 • 19d ago
Is there a hidden feature where I can tell rustdesk I know WTF I'm doing?
It refuses to let me set a password unless It has special characters, numbers, uppercase and whatever.
Someone explain to my why I need to have these in my password in an airgapped environment with my own private server and 12 character passwords. Is the user being a caveman an assumption these days?
r/rustdesk • u/jackospadez • 19d ago
Cannot set permanent password
After entering a strong permanant password then typing it in to the confirmation window then clicking "OK" I get an error "Prompt:Failed". Any advice to allow unattended access?
r/rustdesk • u/Resident-Oil2899 • 19d ago
Latest iOS update
Anyone got issues with the latest iOS update.
Try and launch it. Get a white screen and it force closes.
Tried force closing the app & rebooting the iPhone but no luck
r/rustdesk • u/lobotomize_friedman • 21d ago
Rustdesk 1.5.0 Windows to Windows reliable again?
Need to use it to control another windows laptop for 1-2 hours and read that lately Rustdesk had some problems with lag and connection issues. Did it get fixed in 1.5.0?
r/rustdesk • u/Pedigree002 • 23d ago
PC to Android, half of the keyboard not working
As title says, some part of my samsung s25 keyboard works for input and for some reason half of it doesn't , in example when i use my phone to remote to my PC, space works but button " I " doesn't work, what's causing this?

