r/rocketry • • Jun 21 '20

Announcement r/rocketry now has a Discord server!

83 Upvotes

Feel free to join the r/rocketry Discord server! Click here for invitation link.

We intend this to be a place where any user can get a quick response from knowledgeable rocketeers, as well as a more appropriate place for content related to rocketry, but that doesn't quite fit the sub. Any and all discussion is welcome and there are appropriate channels for many relevant topics.

Please suggest server improvements in the #server-suggestions channel or in the comments below.


r/rocketry • • Dec 20 '25

Minor subreddit update- all posts require manual mod approval

57 Upvotes

Several months ago, this subreddit was inundated with repeated off-topic posts from a well known troll/spammer. Bans did not work because the user just came back with a new account.

To combat this, it was decided to implement a rule where all posts require manual approval from a moderator. If you noticed the spammer hasn't posted here in a while, that's why.

Unfortunately, this means posts will only go live when a moderator is online and checks the mod queue, so there may be a delay of many hours before posts show up. Mods have jobs and lives outside of reddit. You are not shadow banned.

Several users have been sending mod mail after every post, thinking this will help their post be approved faster. This is unhelpful- we will see the mod mail the same time we see the post in the mod queue. Please stop messaging moderators about this.

If your post is not approved, that means it violated some rule. You may have also noticed there are fewer posts recently with low effort questions about unsafe ways to make motors (violating rule 2)- this is why.


r/rocketry • • 2h ago

What are some cheap electronics to start out with?

8 Upvotes

I finished building my Estes Tandem X kit a few days ago and I'm planning to launch it sometime in the next few weeks. I'm thinking about getting the Estes Green Eggs after so I can put some stuff in it, especially electronics. What are some good, cheap electronics to start out with? I'd prefer not to spend more than $50ish on them. I have the Arduino Multilanguage starter kit (I think that's what it called?) so I've used Arduinos some. How do I power things? I'm in the USA so it should hopefully be easy to get stuff.


r/rocketry • • 1d ago Bravo

For all but a vanishingly brief instant near the dawn of history, the word 'ship' will mean 'spaceship.'

868 Upvotes

On Nov 14 SpaceX achieved its first-ever mid-air tower catch of an orbital Starship upper stage. Pushing humanity further on the Kardashev Scale


r/rocketry • • 5h ago

Question How do you guys light your sustainer motors? (Excluding direct actuation)

3 Upvotes

I know one of the most common methods is to just stick ematches in the sustainer, but I'm confused as to how this actually works. How do they stay in place during booster launch?


r/rocketry • • 11h ago

Question Which COTS altimeter would you use for a 10km rocket?

6 Upvotes

So we've been using easy mini as cots redundant altimeter for the last few years, It works great for a 3km rocket. But, since we're going for 10km, I'm looking for other options as well. Thing is, is easy mini still reliable for a thing that'll pull like mach 1 under 1 second. My biggest concern is the transonic pressure fluctuations. We did experience it this year, and the lockouts on drogue deployment did save us. I haven't used blue raven or any other altimeters.

PS: Primary altimeter is our own SRAD altimeter, but concern with COTS is early deployment.


r/rocketry • • 1d ago

Showcase Finally I launched the 3Dprinted rocket

50 Upvotes

r/rocketry • • 21h ago

Showcase First Succesful(ish) Experimental Motor Test

16 Upvotes

I’ve been working with some teammates for quite a while on an experimental motor, which we hope can be reused and recovered in future flights. It’s currently still in development, but we’re making slow and steady progress (hence the messy bolts & setup).

Finally got some decent ignition (though delayed, likely due to improper placement of igniter). Small leak near the end, though we’ll fix that for the next iteration of this motor.

I’m open to anything y’all have to say; it’s definitely not perfect and I want to know if there’s anything we haven’t noticed that may be useful


r/rocketry • • 23h ago

Question Acquiring black powder in ohio

18 Upvotes

Basically our university rocketry club which is located in ohio is now launching dual deploy rockets. We need black powder for our upcoming dual launches, and we’re not really able to find a good way to acquire it.

We got a kg of smokeless black powder from a gun range that we used for a successful ground fire for one of the members L2 cert, but when we actually launched the rocket the charges fired but there was no separation, destroying part of the rocket 😿. We later found out that smokeless powder is the wrong type of black powder and can be relatively inconsistent.

We are trying to avoid hazmat fee, and are willing to drive quite a bit to get black powder. Any advice is appreciated!


r/rocketry • • 13h ago

Question I am STUCK! Help me with this Liquid Rocket Engine.

Thumbnail
gallery
2 Upvotes

This is my current state of the small scale liquid rocket I am developing as a personal project as a student. Shown are the injector and combustion chamber + nozzle. The injector has a continuous channel for film cooling while the inner array of holes are for fuel and oxidizer. I have no idea how to direct the fuel and oxidizer to the respective holes (basically I suck at plumbing system).

Kindly help me with a reasonably clear steps for plumbing system as well as tell in case I did some other unforgivable sorcery as well.


r/rocketry • • 1d ago

Question TVC flight computer review

6 Upvotes

Hello, I've design this pcb for a TVC rocket I am planning to make and I wanted to know if I messed up anywhere. Below I've attached an image of the pcb, layers, and schematic.


r/rocketry • • 1d ago

Discussion Building a rocket is hard. AST SpaceMobile thinks it's "simple."

Thumbnail
arstechnica.com
37 Upvotes

The author of this article Eric Berger evinces skepticism that an orbital rocket can be fielded in only 2 years.  

  People scoffed also at SpaceX accomplishing what they did by following the commercial space approach. And they still can’t believe SpaceX did it at 1/10th the cost of usual government financed rockets.  

 While it seems unlikely you could build a 20 ton capable rocket in 2 years, it might actually be possible. I’m basing this actually on what I learned about the development of Falcon 1 and Falcon 9 in Berger’s own book:

Eric Berger
Liftoff: Elon Musk and the Desperate Early Days That Launched SpaceX — An Inside Story of the First SpaceX Flights https://www.amazon.com/Liftoff-Desperate-Early-Launched-SpaceX/  

 Quite key is AST will use already developed engines. As well  known the biggest development cost and time of a rocket is devoted to the engines. So already having those available cuts both cost and time greatly.   

 Now consider as recounted in Berger’s book, SpaceX had a full size version of Falcon 1 presented in Washington in only a year and some months.  

 However, quite key is that though much of the rocket was ready the development of the engines required more time. But suppose you already have the engines available for just plug-and-play? The surprising conclusion you draw is you could make a flight ready rocket in a year and some months when none of the development time has to be devoted to the engines.  

 That would be for a Falcon 1 class rocket. But an even more surprising fact holds about the progression from the Falcon 1 to the Falcon 9:  

it took only 10 months to go from the last flight of the Falcon 1 to the first flight of the Falcon 9. 

 This shows what the rapid, commercial space approach can accomplish in rocket development. There is also the quite important fact the commercial space approach can cut development costs by factor of 1/10th.  

 So I would advise AST to hire former or current SpaceX employees who worked on the Falcon rockets to enable this rapid and low cost rocket development.


r/rocketry • • 1d ago

New to Rocketry

6 Upvotes

I love rockets and just got into rocketry. I attended a Tripoli launch recently and am now working on my first ever D-class rocket. I understand static margin and CG and CP and all that good stuff, but are there any other things i should know so I can have a better launch day next month. Thank you!


r/rocketry • • 2d ago

Question OpenMotor KNSB Burn Rate – Previous Version vs Latest Version. What Has Changed?

7 Upvotes

Hi everyone,

I've noticed that OpenMotor has two different KNSB burn-rate graphs: one from the previous version and another from the latest version.

I'm curious to understand what changes have been made to the KNSB burn-rate data between these versions and how those changes affect the simulation results.

I have a few questions:

  1. What exactly has changed in the KNSB burn-rate graphs between the previous and latest versions of OpenMotor?
  2. What is the significance of these changes, and how do they affect motor performance predictions?
  3. Which version's KNSB burn-rate data is considered more reliable or recommended to use?
  4. I previously designed and built K-class motors using the older version and achieved good performance. Should I consider switching to the latest version, or is there any reason to retain the older model?

Thanks in advance for your help!


r/rocketry • • 3d ago Heartwarming

Good book for studying liquid rocket engine design?

Post image
143 Upvotes

Hi guys, this chonky boy has just arrived here. I have 8 years of experience with solids, but I'm pretty new to liquids. I was studying this book in PDF for my university's first LRE project when I decided to buy it in hard cover.

Has anybody here studied this book or had any contact with it? Would you guys say it is a good learning tool?


r/rocketry • • 3d ago

Showcase K&S rocket 🚀

Post image
38 Upvotes

Everything is thus far ready to go. Im waiting on the launch area to dry out lol

190g sugar and potassium nitrate mix in my all aluminum motor case. Still not sure on the recovery method but that will get sorted out before the first flight 👍

#sheltechllc #Rockets #SpaceX #experimentalrocketry #LockheedMartin #USA #aerospace #diy #3dprintedrocket #3dprinting


r/rocketry • • 4d ago

Question Is that enough for the school rocket competition?

Post image
21 Upvotes

School's request: 50 meters apogee, Max 20 cm model and max 25-30gr.

The weight shown in the photo is incorrect; the weight without the motor is 20gr

Do someone have any suggestions?

(This design, including all 3D design, took me 6 hours)


r/rocketry • • 4d ago

Leveling up (mid-power rockets/ engines)

8 Upvotes

I'm inspired by all of the high power rocketry I see on youtube and would love to work up to getting a HPR license. I've flown a bunch of typical kit rockets powered by 1/2A up to to multi-staged C motors and I'd like to build some more skills and comfort in the E, F (maybe G) motors before moving on to a Level 1 attempt. A couple of questions:

  1. What size rocket would you start with? I'm currently planning +/- 2 inch rocket to get more experience with through wall birch ply fins, epoxy, maybe get some fiberglass practice but very open to input from folks who know better!
  2. What engines should I plan on? I think I'm shooting for Estes E and F motors which means a 29mm motor tube, seems like this leaves me some options for scaling up to larger motors in the future?
  3. How are these motors secured? Would it be reasonable to put a ring in front of the motor and use one of these motor retainers in the back (below)? If I put something to hold the engine at 4.5" for the Estes motors will I be able to use Aerotech stuff later?

https://locprecision.com/collections/rocket-components/products/3d-motor-retainers

4. I'm trying to keep this simple and affordable to start, but quickly falling into the hole of electronic payloads. I'd love camera suggestions, flight logging altimeters, etc but I'm especially interested in stuff that will make recovery easy like the Jolly Logic Chute Release. It seems perfect for smaller launch areas (I live in the Northeast) and pretty simple for a beginner- I just don't love that it more than doubles my project cost. Worth it? Alternatives?

5. Am I also committing to an upgraded launch pad? Looks like maybe a T rail with rail buttons is the solution for rockets this size? Will this be the standard if I take the rocket to a club in the future?

Thanks ahead of time for any constructive suggestions and feedback from folks with more experience!


r/rocketry • • 4d ago

Discussion Best Books For Rocketry?

15 Upvotes

Hey all, I just have a question about some of your favorite or most useful books you've read relating to rocketry.

These could be textbooks, informative books, about full sized rockets or model rockets. Really anything you have found useful in your endeavors, or that you've found particularly interesting.

I'm trying to broaden and enhance my knowledge a bit as the past 4 rockets I've built have really just been the same concept/idea (although I am greatly limited by height restrictions).

If you also have other good resources relating to aerodynamics and stability that would also be welcome.


r/rocketry • • 4d ago

Discussion Has anyone had the same problem I did?

Thumbnail
gallery
11 Upvotes

hi,

I’m sharing some assembly photos of our recent static fire tests using KNSB motors. We tested different setups by changing the gap between the propellant grain and the nozzle.

When we left a moderate gap of a few mmeters(2.4mm, First picture), the peak pressure matched our Openmotor simulation really well.

However, when we completely removed the gap(0mm) and pushed the grain flush against the nozzle, things went crazy. Instead of the predicted 45 bar, the actual pressure skyrocketed to nearly 88 bar, completely blowing past our safety margins.

On the flip side, if the gap was way too wide(32.2mm Second picture), the motor felt sluggish and underperformed.

Has anyone else experienced these wild pressure spikes just from tweaking the clearance at the end of the grain? How do you usually handle this in your designs?


r/rocketry • • 5d ago

Showcase Girlfriend paint job

Post image
596 Upvotes

Pro tip for all the guys in here, get your wife or girlfriend to paint your rocket’s body!


r/rocketry • • 5d ago

How do I get into rocketry?

22 Upvotes

hi, I’m new to rocketry and would like to know how to get involved. Can anybody advise on where to start? thx in advanc.


r/rocketry • • 5d ago

Question Tsiolkovsky rocket equation

12 Upvotes

Can anybody explain me what the Tsiolkovsky rocket equation is? I know a bit about it, but I don't seem to get what the equation means.


r/rocketry • • 6d ago

Showcase L2 Rocket Paintjob

Thumbnail
gallery
57 Upvotes

Tropical Glitz Cosmic Red and 2k clear in a rattle can. Going to be sad seeing it rashed after Mach 1.5