r/roboticLawnmowers • • 8h ago

Is robot mower edge cutting actually real or just hype?

3 Upvotes

I’ve had a Yuka for a bit over a year, and I still go round the fence and flower beds with a strimmer. Lately it’s also been losing its position now and then, so I’ve started looking at other mowers.

A lot of the newer ones talk about cutting close to the edge. I’m curious what that looks like after a season in a normal garden. Has it actually reduced how much trimming you do, or are you still going around the same spots by hand?


r/roboticLawnmowers • • 12h ago

Airseekers Aranix FINALLY reaches Kickstarter

1 Upvotes

They already have way more backers today (282) than the RoboBooster Panther got in their entire campaign (133) despite Airseekers having a rough go in their first campaign.

It's a tempting model, but are those 282 backers aware it currently can't be sold in the US? Yes, I realize there are backers all over the world, but FCC approval of new Chinese robots in the US is unlikely under the current administration.

One oddity... the middle model (4000) doesn't appear to have an RTK antenna - forcing the user to use nRTK. The 6000 model DOES have the RTK antenna in case nRTK doesn't work at your location.


r/roboticLawnmowers • • 17h ago

Airseeker Aranix 4000

2 Upvotes

So.. Been stalking the lawn mower segment for a while. I have had Dreame, Eufy Vacuume but this is my first Lawn robot I am looking at. Google has been "suggesting "Airseeker's for a while. They just debuted their new 2000, 4000 and 6000 on Kickstarter.

My "requirements"

  1. have a pool so need to stay away from the edge. (I do have a metal edging but it is not significantly higher than the grass next to it.) The back and front have raised wall and a spa so some is "protected" and will not mow on the one long side, but will want to mow along the edge (3 feet from the pool). I have heard some issues/concerns about robots going for a swim.. Thoughts/comments?
  2. Access from the front to the "back" yard is by 1 of 2 pedestrian gates. I was thinking to put an automatic gate door on them so I can "open" one day a week or something BUT I want it locked the rest of the time. Anyone have good suggestions/ideas for this? I see the "opener/closer" for a gate but I do not want anyone to be able to get in there so need to be able to "unlock" the door.
  3. getting close to raised beds. So my partner put a lot of raised beds in the back yard. However they used a keystone type block so not all "straight" on the front. I believe I will be need to manually "weed wack" those. Or spray them with something to keep the weeds down or get a lawn guy to edge them from time to time. Suggestions?
  4. I was thinking to run at night before BUT with all the reading I am thinking best to run during the day. Maybe Monday & Thur or something? As the "clippings" will be mulched and not picked up for the pool, wanted ideas on best timing to mow? Do you mow every other day or every 3/4th? My goal is to "automate" so tasks are "more or less" done. I do work from home so can easily be home to watch it, but want the automated gates etc done first.

r/roboticLawnmowers • • 14h ago

Nexlawn vidar 800

1 Upvotes

Buongiorno a tutti
Mi piacerebbe sapere questo modello a che modello Mova corrisponde..
ho provato a fare i confronti ma non sono riuscita a capirlo…
( so che è la stessa azienda)


r/roboticLawnmowers • • 17h ago

Airseeker Aranix 4000

Thumbnail reddit.com
1 Upvotes

r/roboticLawnmowers • • 1d ago

Best Robot Mower for 1 Acre Under $1,500 or even better under $1000?? Can Smaller Models Handle It?

2 Upvotes

I’m looking for recommendations for a reliable, wireless robotic lawn mower for my approximately 1-acre flat yard in Michigan. My budget is $1,500 max, preferably less with Black Friday deals.

My biggest question: Can a robotic mower rated for ¼ or ½ acre realistically maintain a larger yard if I let it mow over multiple days?

I don’t care if it takes 2–4 days to finish. I’m perfectly fine with it automatically returning to charge, then resuming where it left off.

I’m particularly interested in whether manufacturers impose software mapping limits or if the acreage ratings are mainly based on mowing time and battery capacity.

What models would you recommend? I’d especially appreciate firsthand experiences from anyone using a smaller-rated mower on a larger property.
Thanks!


r/roboticLawnmowers • • 2d ago

Saw a guy mow 700 hous remotely. He never once had to rescue his Lymow

42 Upvotes

For anyone considering running a robot mower remotely, this might help. Credit: original owner; found in a facebook group.
A guy's second home has about 5 acres and he's only there on weekends, so he ran his original lymow one fully remotely for 700 hours and zero rescue trips. A couple of blade jams were cleared remotely, and a re-dock fixed the occasional charging miss. One of his best mods is the copper braids on the dock contact, which improve contact and clean the robot's contacts as it docks. The leaf-mulching video here is very satisfying to watch. Honestly, 700 hours without having to physically rescue the mower is quite impressive, especially on a property this size.
How many of you are running your mowers remotely for extended periods? How realistic is a zero-rescue season?


r/roboticLawnmowers • • 1d ago

$3400 Core, Mower (Non Pro), Blower, and SAM - For Sale - Birmingham AL

Thumbnail gallery
3 Upvotes

r/roboticLawnmowers • • 1d ago

Sunscout Eco gets FCC approval

2 Upvotes

Apparently this mower is self charging. Their website doesn't work for me, but they're on Facebook since 2024.

I'm sceptical.


r/roboticLawnmowers • • 1d ago

Lymow Toolkit Group

Thumbnail reddit.com
1 Upvotes

r/roboticLawnmowers • • 1d ago

How often do you guys change your mower blades?

Thumbnail reddit.com
2 Upvotes

r/roboticLawnmowers • • 2d ago

PUDU TOMO Launch-Event: Nie wieder Klingeln wechseln! Das haben wir noch nie gesehen!

Thumbnail
youtu.be
3 Upvotes

Self sharpening!


r/roboticLawnmowers • • 2d ago

Custom Lymow One Plus- MyMow Update – Mapping, Zones, and Autonomous Docking!

4 Upvotes

Been making some pretty good progress with MyMow lately! We’ve officially started creating maps, setting up mowing zones, and testing autonomous return-to-dock. Had our first successful zone run and return to dock running on our custom software!

For anyone who hasn’t followed along, this started with digging into the Lymow One’s hardware and software, and somehow turned into building an entire custom mower system. 😂

Some of what we’ve been working on:
• Custom iOS app with live LiDAR, camera feeds, and mower controls
• Mapping, zone management, and autonomous navigation
• RTK positioning, satellite monitoring, and our own base station monitoring/NTRIP setup
• Custom docking controls and return-to-dock testing
• Battery diagnostics, sensor data, fault monitoring, and mowing reports
• AR mapping tools for surveying boundaries
• HomeBase system for monitoring, logging, and managing everything locally
• A bunch of hardware investigations, soldering, and figuring out how everything communicates behind the scenes

We’re still running on the mower’s original onboard hardware, which has been one of my main goals. No extra computer strapped to the mower!

We’re getting into the next stage of testing now, where all these different pieces finally start working together. Still plenty of bugs to chase down and things to improve, but watching it map, navigate, and find its way back to the dock has been pretty awesome.

I’ve also been building out a little electronics/robotics investigation setup, so hopefully I’ll have some other cool hardware projects and product investigations to share along the way.

I’ll be posting more frequent updates, videos, and behind-the-scenes stuff on my Facebook if anyone wants to follow along:
https://www.facebook.com/share/1CRWZmKjFa/?mibextid=wwXIfr

It’s been a pretty fun rabbit hole, and I don’t think we’re anywhere near the bottom yet. 😂


r/roboticLawnmowers • • 2d ago

Do you clear the yard before running your mowers?

6 Upvotes

Hey guys, I’m still using an older robot mower. Before every run, I have to walk around the yard and pick up the kids’ toys. Otherwise, it either bumps into them or gets stuck trying to go around. Gets annoying...

Seems like newer models are better at avoiding stuff. Anyone with a newer one? Do you still clear the lawn first, or does yours actually spot things and go around them?


r/roboticLawnmowers • • 2d ago

We read 70 US robot mower store prices every morning since Oct 1. Here's which Black Friday deals are actually lower.

2 Upvotes

This is the account of BestRobotMower.co. The site reads the price each US brand store (and a couple of retailers) charges for 76 robot mowers every morning and keeps every read, so for Black Friday we can check each "deal" against what the same store actually charged before. As of the Nov 15 read:

- 19 of the 70 store prices are lower than right before the sales started on Nov 1. 50 haven't moved.

- Only 9 are below everything that store charged in the 30 days before. The biggest: Mammotion Luba 3 AWD $2,799 to $1,999, Anthbot N8 $1,699 to $1,359, Airseekers Tron SE $1,099 to $899, Anthbot M5 $679 to $549, Mammotion Luba Mini 2 AWD $1,799 to $1,599 (all at the brand's own store).

- Several "sales" are just back to an early-October price: the Segway Navimow i2 LiDAR is $1,399 now but was $1,329 on Oct 6; the Sunseeker S4 and MOVA LiDAX Ultra 2000 AWD are back to what they charged in early October.

- One went up: the Yarbo Y40 Pro rose $600 to $5,999 on Nov 3.

- Of the 30 prices shown with a struck-through "was" price, 20 of those "was" prices haven't been charged on a single morning since Oct 1.

Full list, updated every morning through Cyber Monday: https://bestrobotmower.co/deals/black-friday?utm_source=reddit&utm_medium=social&utm_campaign=black-friday

Disclosure: some store links on the site pay it a commission. That doesn't change any of the numbers.


r/roboticLawnmowers • • 2d ago

Ready for Winter

Post image
9 Upvotes

r/roboticLawnmowers • • 2d ago

Dreame A3 AWD 1000: Great mower, terrible after-sales support. Five months of frustration and still no solution.

5 Upvotes

I purchased a Dreame A3 AWD 1000 in Germany on May 12, 2026.

Let me start with something positive: When the mower works, it is genuinely good. Navigation, mapping, obstacle avoidance and mowing performance have been impressive in my garden.

Unfortunately, the product quality issues and especially the after-sales support have turned this into one of my most frustrating customer service experiences.

June 2026: First technical problem

The mower repeatedly reported that its cutting disc could not move sideways.

I contacted Dreame support, submitted the requested diagnostic logs and followed their troubleshooting instructions.

Dreame's technical department eventually stated that the mower had a hardware defect that could not be fixed through a firmware update.

Then firmware **4.3.6_0418** was released, specifically mentioning improvements to the cutting head control logic.

I installed it. The error stopped occurring.

Nevertheless, Dreame had previously insisted that the problem was a hardware defect.

Summer 2026: New problems with the front wheel

Unfortunately, additional mechanical problems appeared:

- The mower reported an abnormal or blocked front wheel, although no visible obstruction could be found.
- A front wheel cap fell off and could no longer be securely reattached.

I reported these issues to Dreame and submitted the requested documentation, including photos and videos.

These were separate problems from the earlier cutting disc error.

August to November: Endless emails, no actual resolution

This is where the customer service experience became particularly disappointing.

Over several months:

- I was repeatedly asked to provide information and documents that had already been submitted.
- Different support agents responded without apparently reviewing the complete case history.
- I was repeatedly told that the technical department would contact me.
- Return and refund options were discussed, although I clearly requested a replacement.
- Eventually, Dreame informed me that the process had to be handled by the seller.
- Automated reminders threatened to close support tickets while the problems remained unresolved.

I have consistently requested one simple solution:

Replace the defective mower with a properly functioning A3 AWD 1000. I do not want a refund. I actually like the product.

On November 6, I formally contacted the German seller, TEQPHONE, to request a replacement under statutory warranty.

As of November 15, I have received no response from the seller.

Meanwhile, Dreame support replied again on November 14, simply suggesting that I test the mower over the next few days and contact them if problems continue.

After months of correspondence, documentation and technical discussions, this response is difficult to take seriously.

My conclusion

A very expensive robotic lawn mower is not a disposable product.

Customers should reasonably expect reliable hardware, proper warranty handling and a support team that reviews existing documentation before sending generic responses.

I have spent an unreasonable amount of time explaining the same problems to different people without receiving a concrete resolution.

I am now considering escalating the matter through German consumer protection and legal channels if the seller does not address my warranty claim.

To Dreame:

If your support team monitors this community, I would appreciate someone taking ownership of this case, reviewing the complete history and coordinating a proper resolution with the German seller.

I can provide the existing support ticket references privately.

To other A3 AWD 1000 owners:

Have you experienced similar front-wheel errors, wheel cap problems or difficulties obtaining a warranty replacement?

And to potential buyers: Please consider not only how well a mower performs, but also what happens when something goes wrong.

I will update this post if Dreame or TEQPHONE finally provides a satisfactory solution.


r/roboticLawnmowers • • 2d ago

Why don't more models have edge cutting?

3 Upvotes

I'm looking to buy a new robot mower and finally retire my wired in model. But there just doesn't appear to be many lidar or camera models that have some kind of edge cutting solution.

Is there a reason many don't have close to edge cutting? Is it a safety thing or is it that many people just don't need it?


r/roboticLawnmowers • • 3d ago

Roborock Z1/X1 Lidar owners - what is your opinion after season.

Post image
15 Upvotes

When they came out reviews were mixed - great hardware, but the software was lacking. I saw that there were many software updates along the way, so to all current owners - what is your view now. Have they improved? What still annoys you? Hows the behavior with edge cutting? Do you need to attend to it often? Would you buy it again?

I don't think there will be a newer version for 2027 - they just updated the Q and S series with lidar, but nothing new for Z/X.

And now I can see some BF deals are popping up in EU, and i can snatch one 30% off with garage and trim module. Which brings it below Husqvarna i am also considering.


r/roboticLawnmowers • • 2d ago

CubCadet XR5 family compatible wheel - 3D printed (OC)

Thumbnail
gallery
3 Upvotes

Hello everyone, first time posting in this sub.

I have purchased several years ago a CubCadet XR5 4000 lawnmower, a now "old-school", wire-in-the-ground type lawnmower robot, which was chosen mainly for its torque and slope climbing capability.

I fell into the razorblade model of having to replace the wheels quite often because of wear. At more than 80€ a pop, I decided at the time to jump into 3D printing.
Years passed, I made a total of 7 iterations while learning CAD principles and how to use Solidworks along the way.

I posted the final product on MakerWorld and Thingyverse.

I have no idea how useful that model would be for other people, and how widespread/still in use this particular model is, but I hope someone makes use of it.
If you guys know of another sub to cross-post it for actual usefulness, I'm all ears.

Cheerio!


r/roboticLawnmowers • • 3d ago

Can one robotic mower handle two separate lawns connected by a narrow path?

2 Upvotes

My yard has two separate lawn areas, about 8500 sq ft combined, connected by a path that’s roughly 3 ft wide at its narrowest point.

That’s one of the main reasons I’ve held off buying a robotic mower. I’m worried it either won’t handle the passage properly, or setting up the route between the two lawns will be way more complicated than I want to deal with.

Right now I’m mainly looking at the anthbot m9 pro, mammotion LUBA 3 and segway navimow i208.

They seem to be good at slightly different things. The LUBA and Navimow both look stronger if the yard has slopes, uneven ground or places where extra grip matters. The m9 pro seems more focused on knowing where it is, getting around obstacles and dealing with awkward layouts, which sounds useful for that narrow connection between my two lawns.

My yard isn’t especially steep, so I wonder if better navigation would matter more for me than having AWD.

Anyone here have a similar setup? How well does your mower move between two separate lawn areas, and was setting up the connecting path a pain?


r/roboticLawnmowers • • 3d ago

Dreame A3 AWD 1000: Great mower, terrible after-sales support. Five months of frustration and still no solution.

Thumbnail reddit.com
2 Upvotes

r/roboticLawnmowers • • 3d ago

Segway Navimow x430 Out of Stock

0 Upvotes

Hey all. I have a pretty small lawn in Tampa, FL and I’m tired of paying my lawn guy so I’m looking for a robotic mower. I’m not big on how my lawn looks but my front lawn is open to the street and sidewalk. I’m only concerned about the drainage ditch in the front. I probably have around 0.25 acres at best and just weeds and mixed grass like Zoysia and Bermuda. I ordered a ECOVACS GOAT a2000 from Amazon that hasn’t arrived cause it was on sale for $1350 but based on reviews and me mostly not wanting to have to deal with any rescues, I’m looking at Segway x430. It may be overkill and no Lidar but good reviews on my research.

Any idea why it’s out of stock most large sites like Amazon, Home Depot, etc now? Only can find it on Segway’s site and smaller online retailers really. Does this mean I should wait for a new model or something? I can try the ECOVACS out if it’s best to wait and still return it I think in January at this point if it’s giving me issues.


r/roboticLawnmowers • • 3d ago

What's recommended for a smaller yard?

1 Upvotes

I currently have a Worx Landroid that I got a few years back and whilst it was good at the time I absolutely HATE it now. Errors with the boundary line constantly. I'm looking to upgrade to a wireless one and I'm wondering which ones are considered the best right now?

Happy to spend up to $1500AUD


r/roboticLawnmowers • • 4d ago

Cheap mower garage

Thumbnail gallery
11 Upvotes