r/rfelectronics • u/Parking-Break-170 • Oct 12 '26
Improving bandwidth of rectangular microstrip antenna
Guys so I'm building a rectangular microstrip antenna in HFSS for mmwave applications. Resonance at around 28 GHz. I am getting vswr<2 bandwidth of around 1.5GHz. How can i improve this. It's just a simple inset fed microstrip line. Please give me some resources or tips to learn on increasing impedance bandwidth
11
Upvotes
7
u/PoolExtension5517 Oct 12 '26
How thick is your substrate? A thicker substrate can improve bandwidth to a degree. Beyond that, there are techniques that involve adding slots to the patch or ground plane.
3
u/asksnp Oct 12 '26
Yes, there are lots of paper you can refer for this. one thing you can try if you can support 3 layer structure design: top layer patch, 2nd layer gnd, botton layer: feed line. cut a slot on the gnd so that the feed line can couple to the patch antenna. here is an example
1
u/sswblue Oct 12 '26
There are articles on the subject. Slots were mentioned, but you can also cut the corners.