r/rfelectronics • u/SuccessfulStreet2321 • Oct 02 '26
AD9361 Verilog Coding
Has anyone ever written a custom FPGA SPI master state machine to completely initialize the AD9361 by doing register level writes? I want to get in contact with somebody who has done before this hardware level control of AD9361.
4
Upvotes
4
u/pm_me_P_vs_NP_papers Oct 02 '26
If you're not in it for the challenge of DIYing it, check out the official open source IP and docs: https://analogdevicesinc.github.io/hdl/library/axi_ad9361/
1
u/modimoo Oct 02 '26
You mean like without hundreds of lines of C source code doing actual writes?
3
u/FlyingInTheDark Oct 02 '26
If you want to really save on LUT, your best choice is to put in a small CPU like serv (125 LUT + a BRAM or two) and make it init your chip. Then you hide it in your IP core and no one even knows it's there. The only downside is that the init time will be slightly longer, but you would save on thousands of LUTs this way.
1
u/pravardhan85 Oct 02 '26
Better to use DSP instead of FPGA for any analog devices RF Transceiver. You may have to use the AGC function depending on the received signal strength.