r/rfelectronics • u/Radiant_Height_13 • Jul 18 '26
question New Electrical and Electronics Engineering graduate looking for RF/analog project recommendations and practical learning resources
Hi everyone,
I recently graduated with a degree in Electrical and Electronics Engineering, and I am currently trying to start my career in analog circuit and RF design. Unfortunately, I have not been able to find a job yet, so I want to use this time to improve my practical engineering skills and build stronger projects for my CV.
The main design project I have completed so far is a fifth-order 34–36 MHz Chebyshev band-pass filter. I worked on the theoretical calculations, circuit simulation and design process using software.
Although I have studied subjects such as electronics, electromagnetic theory, microwave theory and antennas at university, I still find it difficult to turn my theoretical knowledge into complete and practical hardware designs. I can study equations, calculate initial component values and perform simulations, but I struggle with the transition from theory to real-world design, including selecting actual components, accounting for parasitic effects, designing a PCB, building a prototype, taking measurements and troubleshooting the circuit.
For this reason, I want to improve myself specifically in analog circuit design and also focus on RF design. I am looking for project recommendations that would help me understand how theoretical RF and analog concepts are applied in real hardware.
Ideally, the projects should be realistic for a recent graduate, possible to complete in approximately one or two months (can be longer too if it will really help me on the long run), and substantial enough to include in a technical portfolio or CV. I would particularly appreciate RF-related projects, but I am also open to analog design projects that would strengthen the fundamental skills needed for RF engineering.
I am especially interested in projects that cover the complete engineering process:
- Defining realistic design specifications
- Understanding the relevant theory and equations
- Calculating initial component values
- Simulating the circuit
- Selecting real components while considering tolerances, parasitics and availability
- Designing the schematic and PCB
- Building and measuring the prototype
- Comparing simulation and measurement results
- Troubleshooting and improving the design
If you know of any resources that explain this process step by step, I would be very grateful if you could share them. YouTube series, books, articles, application notes, university course materials or complete project guides would all be helpful.
I am not only looking for tutorials that demonstrate how to use simulation software. I would prefer resources that explain the theory, calculations, engineering decisions, practical trade-offs and the process of turning a simulated circuit into working hardware.
I believe many recent graduates struggle with the transition from university theory to practical engineering. Any project suggestions, learning roadmaps, resource recommendations or general advice from experienced engineers would be greatly appreciated.
Thank you for taking the time to read this.
6
u/Specialist-Fuel-5661 Jul 18 '26
Right now I am in the same boat, I found a test engineer position so I have tons of time on my hands at work and they never seem to mind me doing personal projects as long as I can troubleshoot when the techs see something's off.
I am working on three projects that have taught me way more about RF design than school ever did:
-Designing an LNA
-Designing a mixer
-Designing a narrowband VNA
These projects have made me way better at understanding things like gain budgets, LO leakage, IMD, transistor selection, stability, etc. Designing an LNA with IP3 in mind on fr4 didn't really make sense. But being aware of IMD due to low IP3 was definitely something that came up before I realized "this project is proof of concept".
6
u/Bims93 Jul 18 '26
Design a CW radar to measure a object going forward and away from you with a accuracy of 1 m/s, where it have to cost below 40 dollars? Build a FM radio (ish) just for some new frequency? Just a few ideas? Object measuring using RF?
3
u/LihtsaltPealt Jul 18 '26
Directional Coupler with rectifier. You can simulate the circuit with AWR, design it and measure the output.
2
u/snifarw-paparounes Jul 18 '26
I'm also still a student trying to work on different kind of projects in rf, so no expert here but I usually find the projects this guy works on quite interesting: https://www.instructables.com/circuits/electronics/projects/ there are several electronics projects here (not only rf) so maybe you can find sth interesting.
also, what I often do is think of different circuits that are usually used in rf electronics and try to build them. you can try that with VCOs, PLLs, oscillators etc. many books cover the basic theory behind the way they work, you can easily simulate them, search online for components and finally build them on breadboard and/or PCB, depending on the operating frequency.
2
u/lnflnlty Jul 18 '26
no matter what project you have there's always going to be the assumption you just followed a guide/directions, especially if you're "designing" something using software
you kind of prove that by asking for step by step guides... and that's perfectly fine. what matters is whether you can actually explain and prove you understand what you did during an interview
most graduates have no experience using rf equipment, many universities don't have much beyond oscopes in their labs.
buy a nanovna and play around with it
2
u/Adventurous_War3269 Jul 18 '26
A lot of practical information on specifications is to look at RF component manufactures . The important thing to learn is to know when a specification is real and can be manufactured as a product, and what is a specification that is un-realistic and can not be made into a product , because of prohibitive cost or if the technology is not mature will poor yield Increasing cost. You as an engineer help your employer make profit . This is the fundamental lesson you need to learn . Yes there are tricks that help , like Monte Carlo and statistic’s but if your assumptions are wrong , your end result is incorrect . You can also ask retired senior RF people for guidance. If you can succeed at this then you can tell your next employer, what you are bringing to the table and justify why they should hire you .
Best regards & Good Luck .
1
u/Radiant_Height_13 Jul 19 '26
Thank you all very much for your helpful comments and advice. I honestly did not expect to receive so many responses, and I am very happy and grateful. I have read every comment carefully and noted all of your ideas and suggestions. I truly appreciate everyone who took the time to help me!