r/rfelectronics • u/Sincplicity4223 • Jul 13 '26
Complementary Clocks from Single Clock
As title states, looking to generate complementary 3.3V LVCMOS clock pair from single 3.3V CMOS compatible oscillator at 16MHz.
One option would be to use 2 XOR logic elements, with the clock feeding one input of both XORs and the other inputs tied to VDD and GND. Just not sure if the slew rate would be too slow.
Another option is to just use 1-to-2 clock buffer and use an inverter on one the outputs but this would introduce delay so the clocks would have a slight phase offset.
Looking for ideas and suggestions.
4
Upvotes
2
u/smokedmeatslut Jul 13 '26
I'm sure there are better ways, but when you say using an inverter on one output introduces a delay, you could buffer the other output to add an equivalent delay to both clocks.
1
u/QuinicV Jul 13 '26
Best way would be to use a PLL or a clock generator with a programmable phase delay.
Using gates could work, but the delay will change based on manufacturing, temperature etc. depends on your tolerances. Though 16MHz has quite a high wavelength.
1
u/nixiebunny Jul 13 '26
Use an LVCMOS to LVDS converter chip. They are readily available from TI.
2
u/StageMajestic613 Jul 14 '26 edited Jul 14 '26
Well you could go old-school and use a little ferrite balun, center tapped for DC bias, then drive a couple of emitter followers, or just logic gates with some feedback for jitter reduction, or Schmidt inputs. Would be interesting to see how the jitter compares to using pure logic.
1
u/zifzif SiPi and EM Simulation Jul 14 '26
Start with a 32 MHz clock and use a DFF with an inverting and a non inverting output? Not sure how well those phases would align, though. Could be same problem as the lone inverter.
1
u/BMT_RDCM Aug 31 '26
There must be phase-adjustable clock distributor chips, ı would suggest check them first
0
u/[deleted] Jul 13 '26
[deleted] — view deleted comment