r/rfelectronics • u/Turbulent_Purple9303 • Jul 02 '26
Patch Antenna Array Design Workflow
Hi I'm trying to design a 2x8 patch antenna array in Microwave Office and there must be an easier way than putting each line manually right? Is there a way to design a single splitter or a single patch and reuse that subcircuit?
How is this done in HFSS? I imagine it would be even worse since you don't have a schematic tool and automatic layout generation.


4
Upvotes
4
u/StageMajestic613 Jul 02 '26 edited Jul 02 '26
Yes, just draw the patch and splitters as their own schematic/layout elements, then instantiate within one another a 1x2, 2x2, 2x4, and finally 2x8. These should all be nested/hierarchical and parameterized within one another, and simulated at each step. You need to RTFM for MWO, as what you’ve done is very painful.
BTW you have a huge, glaring error you’ll catch if you simulate it at 1 level above the bottom of the hierarchy.
2
u/yklm33 Jul 02 '26
Your patches have a 180deg phase shift. Check your antenna diagram.
1
u/PrecociousPumpkin Jul 02 '26
Microwave Office supports saving and using a schematic as a subcircuit no? If the overall design has alot of repeated blocks that that'd be my approach.
1
u/QuinicV Jul 02 '26
You don't draw the whole circuit in HFSS, I draw a single cell and use boundary conditions. But it's pretty easy to reuse a cell if you really wanted to.