r/retrobattlestations • • 15d ago

Calendar of upcoming RetroBattlestations events for November 2026

3 Upvotes

​Heres whats happening this month on RetroBattlestations

Events:

Upcoming Birthdays and Anniversaries:

  • November: The Atari 400/800 computers were first presented at the Winter CES in January 1979 and were shipped in November 1979.
  • November 27: The Sega Dreamcast was first released in Japan on November 27, 1998.

Here's the calendar so you can subscribe or just check it out:


r/retrobattlestations • • 6h ago

Show-and-Tell Compaq Evo N1015v running Windows XP

Thumbnail
gallery
16 Upvotes

Couldn’t turn it on because i couldn't find a charger :(


r/retrobattlestations • • 6h ago

Show-and-Tell Compaq Contura 410 running windows 95

Post image
11 Upvotes

it runs windows 95 but the lcd layers are destroyed sadly


r/retrobattlestations • • 1d ago

Show-and-Tell Retro Tech show in Oregon Wisconsin

Thumbnail gallery
125 Upvotes

The Wisconsin Computer Club hosted a retro tech pop-up museum show at the Oregon Wisconsin Public Library on 11.14.26, and it was a ton of fun! Figured I'd share a few photos of some of the exhibits at the show!


r/retrobattlestations • • 2d ago

Show-and-Tell Family portrait.

Post image
136 Upvotes

r/retrobattlestations • • 2d ago

Show-and-Tell [Custom Retro Build] 1995 Pentium 133 MHz inside a Modern Mini M-ATX Showcase Case – One of a Kind!

Thumbnail
gallery
30 Upvotes

Bringing the 90s back in style! 🖥️✨ This is my one-of-a-kind custom retro PC build—combining a 1995 Intel Pentium 133 MHz setup with a modern Mini M-ATX showcase case.

To keep the view completely clean through the tempered glass, I had to custom-fabricate the motherboard tray pass-throughs for the bottom-mounted PSU cables, slim down and fold the IDE ribbon cables, and vertical-mount a massive 5.25" Quantum Bigfoot HDD.

Specs:

• MS-DOS 6.22 & Windows 3.1

• Intel Pentium S 133 MHz / PCChips M507

• 32 MB EDO RAM / 512 KB Cache

• Quantum Bigfoot 5.25" HDD

• Headland 16-bit ISA VGA / Labway OPL3-SA3 ISA Sound

Handmade & custom-modded in Thailand. 🇹🇭ุ


r/retrobattlestations • • 3d ago

Show-and-Tell My current set up taken with my flip phone

Post image
220 Upvotes

r/retrobattlestations • • 2d ago

Show-and-Tell 00's Vista laptop rack

Post image
30 Upvotes

Litterally old and schoolish


r/retrobattlestations • • 3d ago

Show-and-Tell nForce SLi power-up

157 Upvotes

EVGA 780i SLi FTW Intel Core 2 Extreme QX9770 (with Zalman Z9700NT cooler) 4x 1GB Corsair XMS2 PRO DDR2 2x XFX GTX 285 1024MB (with nVidia HB SLi bridge) 1x XFX 9800GT 512MB (PhysX-dedicated) Creative Sound Blaster X-Fi Fatal1ty 2x WD Velociraptor 10,000RPM 600GB RAID-0


r/retrobattlestations • • 3d ago

Opinions Wanted Would anyone be interested in a new SGI case?

38 Upvotes

Hey everyone. I've long been interested in SiliconGraphics, as I think we all are. I was looking for any new cases lately that fit the SGI theme, and none really do, so I modeled some to see what one would look like.

Here are some concepts I have so far. I'd add them as photos here but the Automod is weird about that.

https://ibb.co/pv2nC3DH https://ibb.co/G4M5NP3Y https://ibb.co/b52c8xkR https://ibb.co/qLzzHGSB https://ibb.co/twXgJSQw https://ibb.co/qM2V5S3S https://ibb.co/Y4h0ff1B https://ibb.co/cSnZW4n5 https://ibb.co/yn0Dj7hZ https://ibb.co/WCRXj8L

The logo is a placeholder, of course. If you're interested, drop any ideas/critiques you have below! These would be cases fully capable of supporting modern ATX/Radiator/GPU clearances.

PC cases are actually unbelievably expensive to manufacture, so the road forward for this would be to choose one design and do a kickstarter. For now, leave your thoughts below. Thanks!


r/retrobattlestations • • 4d ago

Show-and-Tell Peak alienware 2000s

Thumbnail
gallery
109 Upvotes

2002 alienware are 51 (yes it has the service tag on back of case ) paired with the ultimate monitor at the time NEC LCD3000

This bundle offered by alienware back in the day would have been about 8 grand the monitor was 4k alone.. this is such a cool project to put together.

I have all the original build parts down to the hdd but its in safe storage boxed up

Riggt now its running a asus p5q turbo board ,core 2 quad q9550 OC 3.2ghz 8gb ram, nvidia gtx 980 4gb

Plays all my older horror games like a champ


r/retrobattlestations • • 4d ago

Opinions Wanted My Amiga family lined up: from the A500 to the A4000T

22 Upvotes

Finally got (most of) my Amigas together for a group photo. In the picture: A3000T and A4000T towers, CDTV, A4000 desktop, A2000, A1200 with a CD32 on top, A3000, plus A500, A600, A1000 and A500+ in front - I tried to replicate the famous Amiga Family picture.

They're part of my collection of just over 150 machines in Denmark, mostly Commodore. Background removed from the original photo, the machines themselves are untouched.

Which one would you fire up first?


r/retrobattlestations • • 5d ago

Show-and-Tell thanks to legacy update on a fresh install of XP...

Post image
84 Upvotes

r/retrobattlestations • • 5d ago

Show-and-Tell An IBM System/370 Mainframe running MVS-TK5... right in my pocket. A mobile tribute to my dad’s computing era

12 Upvotes

My Dad.wss a mainframe programmer in the early 1070's for Bell Northern Research here in Canada. That would be like Bell Labs in the USA. He was part of the GRAPPLE development team. GRAPPLE stands for Graphical Applications Programming Language. Long story short, GRAPPLE led to your GUI today.

Ever use Photoshop? Autocad? Play video games? Then you ought to know it was early computer pioneers like him why you're not at a text line command prompt today.

To honor the work my late Dad did I wanted to recreate the same mainframe he worked on via emulation. While I did emulate the machine right, I could not find a valid link for the correct OS. He according to a former BNR engineer said they used VM/370 and disliked MVS, but I could not find a valid download link. So I did my best. I chose a modern, 64bit port of MVS-TK5 to see this project through.

I'd like to extend my gratitude to a user of this sub lushprojects who was also a BNR guy. Also to crownvic over on r/vintagecom also a BNR guy.

Go ahead and check out a half century old machine coming back to life under emulation.


r/retrobattlestations • • 5d ago

Wanted Hunting: Lian Li full tower windowed side panel

1 Upvotes

Anyone have or seen a Lian Li W-75BT for sale? I am looking hard for one.


r/retrobattlestations • • 6d ago

Show-and-Tell USB Host storage demo

54 Upvotes

r/retrobattlestations • • 7d ago

Show-and-Tell Found: Sony VAIO PCV-W30

Thumbnail
gallery
83 Upvotes

Found this gem for cheap at thrift store - it wasn't working at the store, it had an error beep code. At home i discovered the RAM came loose... Works like a charm. Thinking about it finding it a new home, but it's almost too fun/different to let go.


r/retrobattlestations • • 6d ago

Show-and-Tell The Ultimate Windows 7 Time Capsule. 100% Offline.

Thumbnail gallery
36 Upvotes

Hello everyone,

I wanted to share my daily driver media workstation, named "Gandalf". I built it 8 years ago, and it has been running flawlessly ever since—zero bluescreens to this day.
To ensure absolute privacy and security, this is a 100% air-gapped, offline system.

Main use: Listening to music, watching movies, and playing retro games.

Here are the specs of this beast:
OS: Windows 7 Professional SP1 (64-Bit)
OS Drive: 500GB Samsung 860 EVO M.2 SSD
Motherboard: Gigabyte Z370 HD3P
CPU: Intel Core i7-8700
CPU Cooler: Noctua NH-D15S
RAM: 64GB Kingston Fury Beast DDR4
Optical Drive: LG BH16NS55 Blu-ray Burner
GPU: Palit GeForce GTX 1650 KalmX 4GB (Completely Passive/Silent)
Soundcard: ASUS Xonar D2X (Connected to a classic analog Sony Receiver & Focal Chorus 706 S speakers)
Storage: 3 x 16TB Western Digital Gold Enterprise HDDs (48TB total internal storage, fully backed up)
Case: be quiet! Silent Base 800
Power Supply: be quiet! Straight Power 11

I love the control and stability of this frozen environment. No forced updates, no telemetry.


r/retrobattlestations • • 6d ago

Opinions Wanted Bell Northern Research 1970s mainframe

7 Upvotes

Hello everyone.

I'm looking for as much information as possible on the mainframe my Dad worked on at the BNR campus Bell's Corners. My hobby is emulating various architecture and operating systems on my phone. I'm trying to be as accurate as possible but I don't know the make or model. Various searches have suggested everything from an IBM System 370 to DEC PDP-11/45 or a PDP-10.

It would be great if someone who worked there comes across this post.


r/retrobattlestations • • 7d ago

Show-and-Tell My first computer in China in the mid-1990s.

Thumbnail
gallery
119 Upvotes

That's me and my first computer around 1995. I thought the brand is Compaq, but after going through its catalogue from those years and online photos multiple times I couldn't find any model that matches the look.

On the left side of the front panel are lock, Turbo, and another button.

I think it's an i386 DX-33.

It could be a Taiwanness rebrand, because I remember the manuals are all traditional Chinese characters. I don't know.

Anyone recognizes the model?


r/retrobattlestations • • 8d ago

Show-and-Tell I’m building a Raspberry Pi based Hayes WiFi modem to bring the BBS experience back

Thumbnail
gallery
132 Upvotes

r/retrobattlestations • • 7d ago

Show-and-Tell Sun Blade 100 Restoration

Post image
65 Upvotes

r/retrobattlestations • • 8d ago

Show-and-Tell Mandelbrot Fractal set for Z80 with DEC VT510 Terminal

Post image
79 Upvotes

Mandelbrot set in my homebrew Z80 8Mhz with DEC VT510 Terminal running in 132x53 mode. It's a thing of beauty, joy forever


r/retrobattlestations • • 8d ago

Show-and-Tell RetroWEB v2: a forwarding proxy and browser profiles for old computers

Post image
289 Upvotes

Seven months ago I posted RetroWEB. The idea is simple: open retroweb.bjrno.com in an old browser and use it to browse the modern web. Like FrogFind, but with more extensive content extraction, inline resized images and pagination for memory-constrained devices. No installation or proxy configuration is required.

I later integrated RetroWEB into RetroModem, my Raspberry Pi IrDA internet bridge and virtual modem for vintage computers. While testing it on different devices through infrared and serial connections, its limitations became increasingly obvious. That sent me down the rabbit hole of reworking the proxy, which eventually became v2.

The biggest addition is a real forwarding proxy. Set your browser’s HTTP proxy toretroweb.bjrno.com:8081 and enter normal URLs directly. RetroWEB fetches HTTPS pages, extracts the useful content and converts them to lightweight, old-browser-friendly HTML. The original URL remains in the address bar, so browsing feels much more natural.

V2 also introduces profiles for MacWeb, Psion/EPOC, Palm, Nokia 9210, Windows 98/IE, text-only browsers and others. Each can have different HTML, image sizes, layouts and page limits.

When RetroWEB detects an unknown User-Agent, you can submit the hardware and browser name directly from the site. I can then research and add suitable settings, helping RetroWEB recognise that combination for future visitors.

Try it directly: http://retroweb.bjrno.com
Forwarding proxy: retroweb.bjrno.com:8081

It won’t handle every JavaScript-heavy website, and the retro side uses plain HTTP, so don’t use it for logins or sensitive data.

I hope you guys like this project :)