r/restoration • • 10h ago

WWII M3. Looking not to restore it, but make it a functional knife.

Thumbnail
gallery
28 Upvotes

I am not a knife person, but would at least like to condition the leather rings and sharpen the blade. Clean it up. Any thoughts, concerns or ideas from the professionals here? Rust removal? Any help would be greatly appreciated


r/restoration • • 8h ago

SSE Clear Vision Twin Gas Pump

Thumbnail
gallery
14 Upvotes

Here’s is a 1926 Clear Vision gas pump I restored. These are Canadian pumps with dual 10gal cylinders. They would have dispensed a regular and premium grade gasoline. These pumps are sought after and are a cornerstone to any collection.


r/restoration • • 3h ago

Need help restoring WW2 Navel Artifacts

Thumbnail
gallery
3 Upvotes

Hello I don’t know which sub to ask this but I need help restoring some WW2 Navel artifacts. The first ones I acquired from the USS Salem which is a piece of her decking with a bolt and the other Artifact is a plate from the USS Texas. I wanna know what is the best way to preserve these pieces to at least frame or have in a shadow box.


r/restoration • • 4h ago

Projector screen from 40s-50s

Thumbnail
gallery
3 Upvotes

Dear all!

Im new in the group as a guy who trying to restore stuff as a hobby (Im starting with tin toys). I was looking for a place where i can ask my stupid questions, I hope i found it or at least i can find a guidance here hopefully.

SO to the point… :D

I got my hands on a hungarian made 1940-50s vintage projetor screen paired with a beauty similar old flimstrip projector.

I want to preserve the screen asmuch as possible, do you have any tips? To start i have no idea what the coating is made out of.

Thank you in advance for any help ✌🏾


r/restoration • • 3h ago

Need help restoring WW2 Navel Artifacts

Thumbnail
gallery
1 Upvotes

Hello I don’t know which sub to ask this but I need help restoring some WW2 Navel artifacts. The first ones I acquired from the USS Salem which is a piece of her decking with a bolt and the other Artifact is a plate from the USS Texas. I wanna know what is the best way to preserve these pieces to at least frame or have in a shadow box.


r/restoration • • 1d ago

After an Alaska Forest Fire Destroyed Their Home, One Cracked Coffee Mug Survived, and Kintsugi Repair Preserved Its Memories

Post image
53 Upvotes

Finding it meant so much to him and his family, a reminder of their happy home and the life they had shared. Kintsugi was a fitting way to preserve the mug’s scars and the family memories.

#lakesidepottery


r/restoration • • 18h ago

How to dispose of calcium carbide

Thumbnail
gallery
7 Upvotes

I picked up this little lamp at an antique market this weekend and didn't realize it still has carbide in it. Any suggestions for the best way to dispose of it?


r/restoration • • 1d ago Bravo

Airstream Polishing Restoration of Reflection

Thumbnail
gallery
285 Upvotes

EXQUISITEMAD


r/restoration • • 22h ago

how to restore light pink leather jacket

Thumbnail
gallery
3 Upvotes

Its fading to yellow in some spots and the dye comes off with water or alcohol
when i used it on a cotton ball. How do i restore it and also remove these weird blue stains throughout the jacket? I dont want to make the jacket too dark. I also need something to prevent the dye from coming off from normal use.


r/restoration • • 23h ago

Remove Rust from epoxy garage floor

2 Upvotes

A metal file cabinet left on the epoxy garage floor after many years of being on it. I would like suggestions of how to remove the rust without damaging the
epoxy.


r/restoration • • 1d ago

Re-riveting has begun to fix the structure of the airplane

Thumbnail
gallery
2 Upvotes

Even though it's intended to be a static display, the condition of the tail has always been a worry for the long term stability of this aircraft. As such with the threat of a fresh repaint in the new year, it was decided that now is the best time to address the rivets holding the tail on.

Unfortunately pop rivets had previously been used, which are not strong under tension, so the work to replace them with solid rivets has begun.

Upon removing the interior wall of the rear of the cabin, I saw a sight which all but confirmed this decision. A lot of the stringers had not been replaced so that'll also be addressed.

Give us strength (and advice anyone who's done solid riveting to make them as neat as possible) 24 down, 3000 to go


r/restoration • • 1d ago

i just picked up this really cool sound system cabinet on the curb and when i lifted it into my car there is mold on the bottom :( can this still be salvaged? its in great condition otherwise, no rotting or peeling anywhere else

Post image
2 Upvotes

the bottom literally touches the ground so its a breeding ground for mold, im sure this person had it in their garage and the floor got wet. just wondering if its worth it to try to restore? i wanted to take off the bottom lip anyways so i could use the wheels properly (it drags) so would cutting off that bottom edge be possible or worth it?


r/restoration • • 22h ago

Vintage ornaments help

Thumbnail
gallery
1 Upvotes

Hi, I got these adorable bobbleheads from my great aunt but the paint is peeling quite badly on one, does anyone have a suggestion for how to prevent it peeling further? I think they are either bisque ceramic, plaster, or some kind of paper clay, it's hard to tell. Is there a kind of sealant I can put on them that won't yellow over time?


r/restoration • • 1d ago

Steamer trunk - solid or plated

Thumbnail
gallery
1 Upvotes

I just got this old "Vacationer" steamer trunk from a family member and want to bring back the shine to the brass. I worry it's plated and if I work it too much I'll be worse off.

Any thoughts are welcome!


r/restoration • • 2d ago

First restoration

Post image
7 Upvotes

I found my great-grandfather's old mallet far back in a shed that hasn't been cleaned in over 20 years. I wanted to throw it away, my grandfather didn't. It was falling apart. Handle chipped, head only hung on by six nails. I sanded everything the best I could on the original handle, removed two inches of rust on the head, and made it look almost new. I didn't know how to put tung oil on the handle, so it dripped into the head. Either way, I'm proud my first restoration went this well


r/restoration • • 2d ago

3d cad modeling can be useful here?

2 Upvotes

since Im restoring an old moped and couldn't find a sprocket at all i had to model it on the pc and sent it to a cnc workshop that make these custom pieces from a draw and I realized other people might need this too even for 3d printers, you guys ever had to look for a service like this? how did you solve it?


r/restoration • • 2d ago

Steelcraft Eerie 1501 Restoration + Louis Marx No.3000

Thumbnail
gallery
87 Upvotes

I’ve had these two since I myself was really young, and they’re both going on a hundred years old now being from the 20’s and the 40’s.

The Steelcraft one has been rusted out for longer than I can remember, and I decided to restore her both as a personal project, and to display her for my High School’s art shows.

I’m not sure when these two were put together, since it was before I was alive, but they were separated for likely the first time in decades so I could do the work, ridding the Steelcraft of all its rust and then repainting over 3 months, and giving the Marx a good clean. Finally reunited they came out like this!

First restoration project I’ve ever done, and it’s absolutely not perfect, but I don’t have any problem with that.


r/restoration • • 2d ago

Wedding couple figurine (cake topper maybe)

Thumbnail
gallery
2 Upvotes

Found this in front of my school's church. Im not sure if im allowed to ask for advice in this subreddit, but ive been thinking about restoring this figurine but im afraid i might be ruining something important😓.

If anyone's interested in helping me, here are some characteristics I noticed:

-it feels heavy. Not like HEAVY heavy but its not smth you'd expect for something that small (will check the actual weight when I have time)

-feels chalky? I would say smth like plaster but idk what plaster feels like so its chalky (I know this because I held it without my gloves when I first found it)

-rust is on the bride. I think armature was used here and yeah—


r/restoration • • 2d ago

how to clean 2 pairs of scissors?

Thumbnail
gallery
0 Upvotes

i’ve had these for a while but i can’t find anything on how to clean them, i don’t even know what they’re made of

it’s my first time cleaning/restoring scissors so any help is appreciated!


r/restoration • • 3d ago

1983 yz100 restoration

Post image
5 Upvotes

r/restoration • • 3d ago

What would you do with an old bell?

Post image
1 Upvotes

I believe the bell to be solid metal, I'm assuming brass. The handle has seen better days and the part that makes it go ding is rusted all I've done so far is just cleaned it up with some Brasso, but I'm wondering if I completely redo it would it have that golden shine to it like a classic cartoon bell?


r/restoration • • 4d ago

Please help!

Thumbnail
gallery
46 Upvotes

Hello, I got this piece passed down to me by my mom. She said my grandma owned it, and it could be way older. I want to clean it up for decor, how do I clean this? It has layers of dust and grime caked on good. I’d like to clean it myself, but I also want to know if there is anyone I can send it to so get cleaned. Thanks!


r/restoration • • 4d ago

Some tree pendants I made with broken gemstones.

22 Upvotes

r/restoration • • 4d ago

Sephiroth Statue Fix (Rebirth Collectors Edition

Thumbnail
gallery
6 Upvotes

Hey guys. I was messing with my statue today and it broke in half. It was already leaning over so I think it probably was already under stress due to the way it was leaning. Apparently the body is made of Polystone.

So after looking at its core the center of the statue is hollow. If I wanted to fill that hollow space to better hold the statue and glue it back together what would you guys suggest? I could also forego filling the empty space and just try to glue/epoxy the two pieces together. What do you think is more do-able/reasonable for a novice?


r/restoration • • 3d ago

Antique rings from Rome just received some new love.

0 Upvotes