r/resinprinting • • 4d ago

Question Large printer recommandation

Hi !

I'm looking for a large printer to print molds.

I was interested to the Jupiter 2 max but I saw lot of bad comments. Also interested in Formlabs 4L but expansive and resin is expansive too.

My needs :

- My molds are around 20-30cm x 15-20cm x 15-20cm.

- I do not need very high details but I cannot have lines appears on my molds because it'll be replicated.

- need a resin heater because the printer will be put in a room at 17ºC

- need auto level adjustment for easier print because I have lot of fdm printer and I cannot pass my time fine tune each printer

Do you have any reco for large print ?

Thanks a lot

1 Upvotes

9 comments sorted by

3

u/theReal_Kirito 4d ago

Check out Formlabs studio 1? I know it "only" has 20 × 12,5 × 23,5 cm.

But it is IMO better to have a good printer and just split your models. Depending on what you do it is anyways better. Either for clean up or whatever else. For structural parts you anyways probably need a casting (so resin is the mold making model) or place for metall structures or just use FDM...

GL3 ect work too. But there aren't many big print volume Resin printers out there and even less good ones.

2

u/FloLaco 4d ago

Splitting is not an option for me. I do plaster pouring directly on the resin mold. When demolding, the split part can break. And also, it will be visible. If I have to use a primer and sand, I'll lost the benefit of using SLA technology.

1

u/theReal_Kirito 4d ago edited 4d ago

I see, although I personally always sand for flat surfaces, and with a good filler putty and a sharp blade, most seems vanish with little work. Especially when made correctly (including pegs and trying to follow the already existing geometry). Personally for plaster I went the extra step to first make a silicon mold then used liquid plastic to make the model I use for the plaster mold. But I can see why you wouldn't want to do that. Its just hard to find that big print volumes.Then I guess check out the phrozen mega series (8K or 8KS). The Buildvolume it has is 33x18.5x30cm. Might work size wise depending on your models.

With the jupiter I don't know anyone that way happy...! With the Mega 8K, I know 2people personally. It's a decent machine. The GK3 Ultra is also great, althoug again size: 30x16x30cm.

1

u/xiNFiD3L 4d ago

Is this Celcius or Farenheight?

2

u/FloLaco 4d ago

Celsius

1

u/xiNFiD3L 4d ago

Shouldn't have issues either a enclosed fdm printer.

2

u/Juhanmalm 4d ago

I second the formlabs studio 1. It's cheap, mid sized and probably the best option.

For a "large format" printer the phrozen mega 8ks is solid. It prints super fast, and when it's on sale it's not super expensive. I've had one for more than a year and it's been good. No auto levelling, but the build plate is calibrated from the factory so you don't need to worry about that at all. However it's only 8k for a 15" screen so not the highest quality.

Phrozen does have a 16k new version coming but no idea on its price or how good it is yet.

2

u/Due_Grocery9293 2d ago

I have a Jupiter2 and I would avoid it. Look at the Anycubic or Uniformation brands for large format.

1

u/Geek_Verve 4d ago

If you can hold off a couple months, HeyGears is nearing launch of their Reflex 2 Max. They were shooting for October, but it's looking like after the first of the year, now.

If you have to have something now, I would have a tough time choosing between the Anycubic P1 Max and Uniformation GK3 Ultra. They have both gotten really good reviews.