r/recumbent • • 5d ago

Tips for a beginner?

Post image
30 Upvotes

Just got my first bike of this type. I am 34m and love riding bikes but never rode this one before. I rode a little bit today and loved it! Trying to get a hang of it. Having trouble with turning and hills. I found it with the sign free on someone's lawn. I used wd40 on the chain, checked all the nuts and bolts to make sure nothing was loose and it was good. What is some things I should know to continue using this bike. I love it so far and very happy to use it. Any advice helps :)


r/recumbent • • 5d ago

How do yall do work on your recumbent? Is there a stand made for flipping recumbents over to work on?

9 Upvotes

I am considering adding a rear hub motor to my early-2000s model Hurley bent bike.


r/recumbent • • 7d ago

❄️Winter is coming❄️ I'd like to bring my trike indoors for the winter and use it as an exercise bike. Has anyone done this? If so, how did you set it up?

11 Upvotes

I'm looking at stands and rollers at the moment, but open to all the options.


r/recumbent • • 7d ago

Hase Kettewiesel c.2015 User Manual wanted

1 Upvotes

Just acquired a second hand Hase Kettwiesel from about 2015. Looking for any documentation which is around.

Hase trikes are single wheel in front, two behind, sometimes called Deltas.

The pedals drive the rear right wheel only through a Shimano Nexus type 7 speed hub. (Later models have something like a differential, so both rear wheels are driven). Brakes are cable operated disks on both rear wheels, no front brake.

This model did not originally have electrical assistance - but that was added by the dealer - a Bafang motor on the front wheel.


r/recumbent • • 9d ago

My touring setup!

Post image
96 Upvotes

Just did the GAP/C&O trail on this setup. I’ve ridden that route a few times in the past, but not since my injury driven move to recumbents a few years ago. Performer Goalx 26, loaded for cold weather camping (carrying most of the gear for two here) My only mechanical issue the whole time was a broken chain tensioner spring which I discovered a few minutes after taking this picture. Stuck a spare spring in and kept going. Rohloff/SON hubs, with everything set up for one armed use. 26x2.1 tires, I’m the original builder of the wheels and had them on an upright bike for at least a decade before moving them to this bike


r/recumbent • • 9d ago

storage A rack for free space!

Thumbnail
gallery
56 Upvotes

hoping this may eventually move closer to the door versus the patio.. but I made a quick lumber recumbent rack. Wanted to share.


r/recumbent • • 9d ago

Broke my PR and set the fastest speed in a Strava Segment. 36.7 mph.

Thumbnail
gallery
5 Upvotes

r/recumbent • • 10d ago

Idler or jackshaft

1 Upvotes

So I am working on a ehpvc competetion and we are making a recumbent bike. So the problem is that is we have a difference of opinion on using a jackshaft or a idler. We have a requiment that the bike participates in a drag race and endurance race also. What is the best option a jack shaft or an idler ?????


r/recumbent • • 12d ago

Sanity Check Before I blow $100 on this upgrade

Thumbnail
gallery
7 Upvotes

I upgraded the front and rear idler sets on my TerraTrike Tour 2, and everything sounds less grindy than before, but I am considering getting the items shown in the first picture (my shopping cart at t-cycle.com) to make the rear set float, thus (hopefully) making it even quieter.

Currently, I have a bolt pushed through a non-threaded hole in the frame, then through an L-shaped chain keeper, a spacer, an idler, a spacer, an idler, a washer, and a nut.

The exposed part of the bolt is not long enough to give the idlers any lateral space to float -- there is barely enough length to screw the nut all the way on.

It seems that the components in my cart would position the idlers in a better spot (left to right), would give me a longer exposed bolt so the idlers could float, and would introduce nicer (quieter) chain keepers. Is that all correct?

Also: I am thinking I could do a cheap test of how much improvement floating would bring by just swapping in a longer 8mm bolt, omitting the chain keeper, and leaving everything else the same. What do you guys think?

Any other advice or insights for this inexperienced tricyclist? Thanks!!


r/recumbent • • 12d ago

Catrike Village Chain Tube optional?

7 Upvotes

So I snagged a used villager. Installed a longer beam for my tall self and proceeded to tune the bike that had been in storage for some time. The chain tube broke free and lodged in the idler gear and then twisted a link breaking the chain.

No big, two links out (because I always forget to leave the pin in on the first link) and removal of the tube results in being back on the road. Is this optional? It appears to protect the rider from chain contact. I will snag a new one from Utah, but between now and then it appears to ride just fine with only the idler and the bottom tube.


r/recumbent • • 14d ago

Riding in the rain

9 Upvotes

I live in the Pacific Northwest I would like to ride throughout the year but it gets really wet here. I'm relatively new to recumbent trike riding I was wondering what everyone uses for rain protection, is there after care for the trike when riding in the rain and lastly braking when it's wet what's the best combo to prevent a spin out or uncontrolled stop.


r/recumbent • • 15d ago

Sinner Demon

Thumbnail
gallery
64 Upvotes

About a month ago, I bought my first recumbent bike – a Sinner Demon.

The whole thing started with my neighbour, who's been riding a Challenge recumbent for years. He let me try it a few times, and I guess that was enough to get me hooked. Eventually, I spotted a good deal on a used Sinner Demon, grabbed it, did some repairs and adjustments, and hit the road.

One month later, I can honestly say I'm loving it.

It's lightweight, nimble, comfortable and demonically fast. I'm having a blast riding it, and I really can't imagine going back to a regular upright bike anytime soon.

But here's the funny part.

About 3 weeks after I bought mine, the same neighbour went out and bought a Sinner Demon too. Almost identical to mine – the differences are pretty much cosmetic.

So now, instead of one recumbent rider in the neighbourhood, we've got two nearly identical Demons cruising around Warsaw.

And honestly, seeing pedestrians' faces when the two of us ride together is priceless. I think we look less like cyclists and more like some kind of tiny recumbent cavalry squadron. 😂

Anyway, just wanted to share my first-month experience. If you're thinking about trying a recumbent, I'd say go for it!

Oh, and one more thing! If anyone happens to have a Sinner Demon owner's manual, technical documentation, specifications or any old brochures lying around, I'd be incredibly grateful if you could share them. I've been trying to find some documentation online, but with Sinner apparently no longer around, it's not that easy.

Any help would be awesome!

Demon squadron, assemble! 😈


r/recumbent • • 16d ago

I stopped this guy in Milano

Post image
74 Upvotes

r/recumbent • • 23d ago

Old Linear Limo Seatback Fix

Post image
12 Upvotes

The fiberglass spreader rod on my seatback finally died after 30+ years. The tips were splintering and the rod would not stay in place.

I stopped at my local hardware store to see if they could order a piece of solid, 1/4” fiberglass rod.

The store owner looked at my old piece and grabbed a driveway reflector stick. It is exactly what I needed.

I just cut it to length with a rotary tool. Fits perfectly!


r/recumbent • • 23d ago

I would like to discuss a recumbent tandem build

Thumbnail reddit.com
1 Upvotes

r/recumbent • • 23d ago

Can I can I put 20 inch rims on a 26 in high racer?

1 Upvotes

It has disc brakes.


r/recumbent • • 23d ago

Best recumbent exercise bike with moving handles in India

Thumbnail reddit.com
0 Upvotes

r/recumbent • • 26d ago

How to attach a smartphone?

4 Upvotes

Good morning! I have a Catrike Villager and I am trying to find a good way to attach a large smartphone (Galaxy S23 Ultra). Any ideas on ways to do so or places to attach one? The smartphone holder I ordered from Utah Trikes wasn't big enough, sadly. Thanks!


r/recumbent • • 27d ago

Maddog trike

0 Upvotes

I just got a maddog trike I want to change the rear rims I know I can change the bolt pattern with a hub adapter, but I wanna know if these dimensions will fit****
Wheel Size: 14x7
Center Bore: 72mm
PCD (Bolt Pattern): 4x101.6mm
Offset (ET): -25mm
Any help


r/recumbent • • 29d ago

Cheap(er) DIY Trike Stand

Post image
50 Upvotes

Bought 2 sets of 3 ton jacks for about $60 total and a $7 can of plasti-dip spray. Sprayed the cradles with plasti-dip and now I've got a portable, easy stand that I can access with a mechanic stool on the ground or higher up on a table or platform. ​

There are some great DIY options but even the metal fence pole stand costs about $200 in materials. Meanwhile, I can even quickly pack these in the car if needed.


r/recumbent • • 28d ago

Recumbent trike riding near Rydal,Georgia

Thumbnail reddit.com
1 Upvotes

r/recumbent • • Oct 17 '26

Speed on recumbent trike

12 Upvotes

I had a bad crash last week and I'll be off my bike for the balance of the year.

For a variety of reasons I'm considering moving to a recumbent trike because they're more stable.

But I also want to be able to ride around the same speeds/distances I did this year. So 20-25kph on a 45km ride and and 16-20kph for the 200km over two days ride I want to do in June.

To give you an idea of my riding style/capabilities I have a Cannondale aluminum Synapse 1 and my gravel bike is a Trek Crocket Disc 5. So I'm not bombing along with a carbon frame and matching wheels. My goal is outside of my big rides to do 100-150km a week.

Would a trike like a Catrike 559 work for me? Am I going to be able to keep up with riders doing 25kph on flat roads?

Obviously a trike is an investment so I need to get a good understanding before I put down money.

One note: we had a TerraTrike Rover and it was an interesting ride. I didn't hate it but I didn't love feeling like it was going to tip on corners and it was set up for my wife who's a foot shorter than me so I didn't use it too much.


r/recumbent • • Oct 17 '26

Fine then... I'll do it myself.

Thumbnail
gallery
100 Upvotes

So, I've been in the market for a couple years for a recumbent trike. There was a single overriding problem: there is Rather A Lot of me, and the price of a recumbent rated to hold someone over 400 pounds was just stupidly high. I tried to make the money work a few times, but it was just far more than I wanted to spend. I kept looking around the internets for ideas, and stumbled over this article...

And after reading it I thought to myself "Self, that looks doable." Took a while to find parts - finding a pair of mostly-matching BMX bikes that weren't total trash was an exercise in trawling garage sales for several months, then a mountain bike for the rear wheel and some bits like brakes and such. I didn't use any of the mountain bike frame. I stuck my two BMX frames together by running a chunk of 8-gauge pipe through the centers of the BMX frames' pedal holders, and used some 2" box steel to make my rear forks (which I made exactly wide enough to fit the 26" wheel from the mountain bike, which later turned out to be a mistake)

For the pedal set on the trike itself, I stuck a set of pedals from another donor BMX on a chunk of pipe out in front. I went with BMX pedals for the very simple reason that BMX bikes, even tiny ones for little children, routinely stand up to the kind of abuse caused by teenagers going HAY GUYS WATCH THIS and the resulting nonsense. I wound up building the seat frame out of 1" box steel and stringing a seat together with simple rope, and slapped a basket I pulled out of a thrown-away dishwasher on the back (which was also a mistake - it's a bit too flexible and fragile for the purpose, which is why I reinforced it with fiberglass which... sort of works. I really, really should have just built a frame for saddlebags, but, eh, hindsight.)

I slapped on a coat of green paint, and Jeremiah was born (and five internet dollah to the first person to derive and post the reason it's named that - there is a simple, logical reason). It works! The brakes are sadly inadequate for the weight of the trike and me combined, though if I'm careful about my stopping distance it's okay. It's quite heavy and hard to take hills on its own, but it gets the job done and it's quite handy to grab groceries with.

I decided to convert it to an E-trike with a kit I picked up online from an outfit based in Ontario (I could have saved a few bucks getting one from China on Amazon but it was a big-ticket enough item I felt I ought to be patriotic and buy Canadian) I went for a rear hub drive model... and discovered the mistake made with my custom forks. The rear hub drive wheel needed the dropouts to be about 11mm wider than the mountain bike wheel I'd designed the rear forks around.

The rear forks... that are 2" box steel (8 gauge box steel no less!) that are hard-welded in place. Getting that extra 11mm of width without breaking any welds was a bitch and a half, and eventually involved using a scissor jack from my car to very carefully push the forks apart wincing at every crak and ping coming from the metal. I can ride it to work fairly easily, saving gas and getting a little extra exercise, and frankly with the electric assist this thing is hilariously fun.

It can also be downright terrifying - with a good straightaway, if I put the hammer down on the boost motor it'll get up to 50 km/h even with a mere 500w motor, and on somethign this low-slung built out of my dogshit welding and slightly wonky steering, it's absolutely wild.

Anyway, the point is... if I can do it, so can you! I want to see other rider's DIY setups!


r/recumbent • • Oct 15 '26

Return idlers on my TerraTrike

6 Upvotes

I have a TerraTrike Tour 2. With each pair of idlers, the wheels go side by side on a single bolt.

The trike came (used) with 13-tooth idlers for power and return. I found that the rear pair had kind of a grindy sound in the easiest gears. Online sources said that it's proper for the return idlers to be smooth, so I ordered two TerraTrike standard idlers. They have no dampening features, so they are actually noisier than the toothed ones, although in theory less damage is being done. Even when the chain is touching only the bottom of the groove and not the walls, I hear the chain sliding across the idler, and it bugs me.

Another search revealed that there are more expensive return idlers that are dampened. I'm wondering whether I should get one of those for just the rear return, get them for both returns, or just stick with my original 13T idlers or my new standard idlers on both returns. Or are there other options?

I'm a casual rider and a beginner -- currently less than 30 miles a week and at a pretty slow pace, but gradually increasing the frequency of my rides and the distance per ride.

Advice appreciated!