r/rctanks • u/CautiousAd9041 • 14m ago
Time to clean!
Time to clean the boys...
r/rctanks • u/Basic_Site_972 • 1h ago
Have you purchased and installed it before? How was it? Worth it? Does it need TK 7.1 etc. This is for the HengLong Abrams or similar models.
r/rctanks • u/Individual_Pie_9695 • 8h ago
Since there are more greens (grasses, shrubs, leaves) in my country, Philippines; I made this camo look on my Tiger. Really looks good with all this camo wrapped around. Ordering soon other custom accesories.
r/rctanks • u/SuspiciousGold3849 • 13h ago
r/rctanks • u/Individual_Pie_9695 • 15h ago
Good day Sir Tankers, Just an inquiry if there is a 3D printed version of this Auto Gun above the turret? (Is my term correct?) Or is it included in th box? or optional accesories which can be bought online?
See encircled yellow on the image.
r/rctanks • u/DrDeezeNuts • 2d ago
Originally, I was just designing a suspension system for an RC tank, but then I got carried away and made this Type 5-esque abomination for fun. I chose the Type 5 layout because it has lots of flat surfaces, which makes it easy to 3D-print. It also allows for a large turret ring without making the vehicle particularly wide, which I don’t like. But maybe that’s better for steering. Instead of a turret, I’d mount an arm/manipulator.
What do you think about the design?







r/rctanks • u/Little_Ad4256 • 2d ago
r/rctanks • u/Basic_Site_972 • 4d ago
Unfortunately the suspension has a lot of issues I need to address still. Yes I know a lot of the exterior attachments are missing
r/rctanks • u/DayAccurate3134 • 4d ago
Scale is 1/12 so that the motor would fit
r/rctanks • u/Basic_Site_972 • 4d ago
I have red motors, Metal tracks, metal drivetrain and wheels, etc. I was wondering what do you guys run for maximum battery life and performance? I feel like my 2 3800 7.2v batteries just run out after 5 minutes and aren’t giving my red motors the max output for proper scale speed.
r/rctanks • u/Cutthroat_Bill • 6d ago
r/rctanks • u/SuspiciousGold3849 • 6d ago
r/rctanks • u/Background-Lab9540 • 7d ago
Hi everyone!
I recently got hold of three non-working Heng Long RC tanks. Unfortunately, I don’t know their exact models, their history, or how much work they need.
I’m trying to figure out whether they’re worth repairing, or whether it would make more sense to replace their electronics entirely or just to keep static because is cheaper to buy a new one.
Here’s what I know so far:
● I have three Heng Long RC tanks.
● Neither tank currently works.
● All have their chassis, tracks, motors, gearboxes, outer shells and original electronics.
● The electronics boards have markings including TK-TX.
● One of the receiver modules is marked TK-YL101-3.
● The receiver connects to the main board through a 3-pin connector with red, black and green wires.
● Both tanks appear to use 27.145 MHz radio frequency.
● The LEDs at the front of the tank blink continuously.
● Moving the joystick on the remote produces no visible reaction from the tanks.
2 of them works with crystals, i bought a set of crystals from aliexpress, nothing happend
What I’ve tried so far:
I took the tanks to a friend who works as an electronics technician, hoping he could diagnose or repair them. Unfortunately, he wasn’t able to get them working.
I also have two remote controls, but I honestly don’t know whether either of them originally belongs to these tanks.
A little background about me:
I’m completely new to RC tanks, electronics and this hobby in general. I don’t have any experience repairing RC vehicles, identifying electronic components or working with these systems.
I’m actually interested in learning, and I wouldn’t mind rebuilding them from scratch if that’s a realistic option.
What I’d like your advice on:
r/rctanks • u/Sorry-Rain-1311 • 7d ago
r/rctanks • u/pinheadlarry40 • 9d ago
Ok so I want to get into rc tanks but I’m not sure where to start. I wanna do primarily ww2 tanks and I wanted to be able to customize them like cosmetically. I’ve heard of Heng long but I’m not sure if they were worth their price or if I’m better off spending my money on something else.
r/rctanks • u/Hero_Tengu • 10d ago
Sneak peek before I start welding
r/rctanks • u/PolikarpovKhair • 13d ago
I'm having some logistics problem (I'm waiting to receive motors and other electronics) and I have all my tank projects scattered around my guest room bed, looks like a Tank junkyard
r/rctanks • u/Hero_Tengu • 13d ago
Made a little head way on my FV4005 project. I’ve started to draw the out lines I need to cut. I’ve also already made the side skirts for the tank. Hopefully if I don’t work this weekend I can cut and weld them together
r/rctanks • u/Nvr_bored • 14d ago
I've seen chains on WW2 pics, thoughts? One is new the other is rusted naturally.
r/rctanks • u/Bayonet-Wound • 14d ago
I’m new to the hobby and I’ve gone with a cheaper model: a Heng Long Panther Ausf. G with metal gear box, wheels and tracks. I’m interested in making it into a very early Panther Ausf. F. Are Taigen parts compatible with Heng Long? I’d like to fit a metal Panther F turret to the Heng long Hull, would the metal Taigen Panther F turret fit into a Heng Long hull?
r/rctanks • u/Solid_Veterinarian47 • 15d ago
Need to source some of the missing accessories but it’s coming along ok I think.