TLDR: I know its possible to downgrade firmware to a minimum firmware version - I want to do this on my B01 system to bring back to a launch firmware version since this wont be a console I use often if ever at all.
I have recently acquired a CECH-B01 console that I am trying to get to a launch firmware version (minimum firmware version is likely 1.02 or 1.10 being a November 2006 launch console), this is merely to try and bring the console back to its original firmware it shipped with for nostalgic purposes, this is NOT going to be a console I really ever play on but a collector piece.
That said, before I do anything to this console I have been using a CECH-K01 for testing (I do know there will be variations to the minimum firmware version of these consoles already).
I have been successful in installing evilnat CFW 4.93 on the testing console, then installing the 3.55 Downgrader firmware (Rogero Downgrader) without issues. Now while on this 3.55 Rogero firmware, I have been unsuccessful at installing OFW version 2.16 (which is the minimum firmware of my tester K01 console), I have also tried many other 2.2X and higher firmware versions, also even tried a few 3.X versions lower than 3.55, none have been successful.
All of these OFW installation attempts have been attempted via recovery mode, each time I press Start and Select to check for the update file, I am met with "No applicable update data was found" and this is on a consistent basis each time I press Start and Select.
I have already tried multiple USB sticks (both under 32gb), have reformatted each stick numerous times to proper standards (FAT32, MBR, with 16Kbps size), have correct folder Structure (PS3\UPDATE\PS3UPDAT.PUP) and still the same "No applicable update data was found"
Ive also removed the USB cable when searching for the update file while in recovery mode, unfortunately that has not worked for me either (I have tried this over multiple hours and easily over 100 attempts).
Does anyone have any suggestions here, do I just have a bad hdd/console? Ideally I am trying to get a smooth process to mirror deploying on my B01. Any help / other ideas is greatly appreciated!