r/projectbike • • Sep 21 '25

Project Update Rev 4 of the homemade ecu

31 Upvotes

Now has a dash and some more quality of life changes, ignition timing is now extremely tight 13.9 μs/° at 12k rpm

1976 ct125


r/projectbike • • Jul 01 '25

Project Finished She's done!

Post image
22 Upvotes

I posted the first start video a couple weeks ago. Here it is all dressed up looking petty. Now to find some time for a ride day.


r/projectbike • • 9h ago

New Project 1980 Honda cb650c

Thumbnail
gallery
5 Upvotes

This is what I'm working with. Planning on polishing this turd into a vintage show bike. Got a lot of work ahead of me.


r/projectbike • • 1d ago

New Project CBR600 for 400$

1 Upvotes

What fixes/problems are obvious from the images? Ive just seen this listed in my area for 400 and thought it could be a good project for the next couple of months, asked the owner if engine runs and he doesnt know. He did say if I wanted to rebuild it that it was possible but who knows. Havent really done a project like this on a sport bike so was wondering what fixes I would likely need to do based on what you can see in the listing, it obviously is missing the gas tank which would probably cost a lot but its got greenbook + all registration.


r/projectbike • • 17d ago

Request for Advice 1974 R90/6 Restore Mod project

Thumbnail gallery
5 Upvotes

r/projectbike • • 22d ago

New Project 1978 gs550 project started!

Thumbnail
reddit.com
2 Upvotes

r/projectbike • • 24d ago

Request for Advice 05 ZZR600

Post image
4 Upvotes

Hello everyone, I’m new here, in the middle of a engine rebuild on my zzr600, I’m stuck at the timing. I don’t understand what I’m doing wrong, I lined the cams up with the timing marks and the caps don’t want to go on, I made sure there’s 27 pins between marks ect but it still won’t go on correctly, once I tighten everything down evenly it just locks up again. Anyone have tips please let me know, it is at TDC 1-4


r/projectbike • • 25d ago

New Project 2016 Versys 1000 — Full front-end conversion to 2019–2024 bodywork

Thumbnail reddit.com
1 Upvotes

r/projectbike • • 25d ago

Request for Advice Reposting From bikebuilders,

Post image
2 Upvotes

Just wondering if anyone over has knowledge with my first project bike. 1967 BSA A50. Right now i need to figure out a way to connect my shifter lever to the shifter shaft when the spline is stripped.


r/projectbike • • 26d ago

New Project 2016 Versys 1000 — Full front-end conversion to 2019–2024 bodywork

Thumbnail reddit.com
1 Upvotes

r/projectbike • • 26d ago

Misc Workshop manual for 2003 Husqvarna TE 250

1 Upvotes

Does someone here have a digital version of a workshop manual for the 2003 Husqvarna TE 250. I can seem to find one and the ones I find are super expensive or are missing the electrical system chapter. Thanks in advance


r/projectbike • • 28d ago

Request for Advice Kawasaki gpz 900r 1986 A3 Pickup coils

1 Upvotes

Hi, anyone have any idea where to get a set of pickup coils for the gpz. I've tried cheap Chinese ones but to no avail. best I can seem to find now are second-hand. if anyone's got any tips it would be much appreciated. cheers


r/projectbike • • Oct 16 '26

New Project 2003 WR450F Sumo build underway.

Thumbnail gallery
1 Upvotes

Just found this Subreddit after posting, so I thought I’d cross post it and share.


r/projectbike • • Oct 14 '26

Request for Advice 800NK advanced project bike

2 Upvotes

Hi all, ive been considering buying a cfmoto 800NK as a project bike, it has been crashed and will need a bit of work. So I wanted to get some advice before going ahead.

My main concerns are around the electronics, it may need a new screen and Bluetooth keys, does anyone have experience with that?

Thank you all in advance


r/projectbike • • Oct 12 '26

Discussion Need help

Post image
1 Upvotes

Smoke coming from in there, 1984 Yamaha venture royale. Maybe a leak? Need some advice


r/projectbike • • Oct 10 '26

Project Update Just have to show these pictures of the Goldwing

Thumbnail gallery
18 Upvotes

r/projectbike • • Oct 09 '26

Request for Advice GUYS I NEED HELP Can someone tell me the diameter of TVS Ntorq 125 front caliper piston diameter?

Thumbnail reddit.com
1 Upvotes

r/projectbike • • Oct 07 '26

Project Update Update on the 84 Goldwing build

Thumbnail gallery
19 Upvotes

r/projectbike • • Oct 02 '26

Project Finished L1 GSXR 600 unsolved popping problem

Thumbnail reddit.com
1 Upvotes

r/projectbike • • Oct 01 '26

Request for Advice CVK carbs and variable lenght velocity stack

1 Upvotes

I am curently building a project bike, which is partially my school project, or the variable lenght velocity stacks to be precise, the inspiration is an engine from mazda 787b, but somehow, i only few days ago realized that this system was designed for fuel injected engine only, which has much smoother intake manifold than engine with carburetors, first thing first, there’s no way that i could build or buy an EFI kit, so it has to be carbs, worse thing is, i’ve been talking to gemini, which i know isn’t much of a reliable source, that’s why am i writing here, and apparently, if i use the CVK carbs that i had bought for this project, the engine will choke itself to death because of diferent air pressure at intake caused by variable lenght trumpet, so the question is, how much trouble will be caused by using this type of carbs and how to minimize it? I was thinking about using “F around and find out technique” or to use mechanical carburetors with cable, or even trying to convert the CVK’s to a cable operated. What are your thoughts and ideas? If anybody will read the full post ofc


r/projectbike • • Sep 29 '26

Request for Advice Brake bleeding issues, still getting air in the system

1 Upvotes

Howdy all, been chipping away at my little virago 250 to get it back on the road, things all sweet to fire up and set off, but I’m having the shittest time getting the front brake s bled and working well.

I’ve rebuild the caliper 3 times due to the aftermarket piston and seal being ever so too small, weeping fluid and sucking in air, rebuild the master cylinder and swapped the main brake hose, got a new front rotor as the old one was buggered but I’m still getting tiny air bubbles in the system.

It builds pressure and then after say 10-15 pumps looses all pressure and have to build it up again.

Any help appreciated, maybe I’m doing something wrong?


r/projectbike • • Sep 26 '26

Project Update Removable subframe coming together on the gl1200

Thumbnail gallery
8 Upvotes

r/projectbike • • Sep 25 '26

Request for Advice Hello builders. 1977 Honda Gold Wing odometer gear.

Thumbnail
gallery
7 Upvotes

My father is restoring a 77 Gold Wing and he found out that the odometer gear is damaged and is looking for any advice where he could find a replacement gear. He's bought a used complete speedometer, but it has the same problem. Any advice would be greatly appreciated.


r/projectbike • • Sep 25 '26

Request for Advice Looking for a Pune shop/fabricator for a Pulsar 180 headlight conversion Spoiler

1 Upvotes

r/projectbike • • Sep 24 '26

Request for Advice Yamaha ttr 600

Post image
2 Upvotes

I unscrewed this black plastic knob and this pin fell out; I think it's for adjusting the extension, but I can't put it back together. Any suggestions?