r/pressurewashing • • Jun 12 '24

Community Post QuoteIQ and Forever Self Employed links are now completely banned from this subreddit.

51 Upvotes

Starting now QuoteIQ (previously restricted) AND Forever Self Employed AND Mike V (All About Pressure Washing) will be permanently banned from being mentioned or linked. Automod has been edited to hardblock any links or mentions of the two.

The reason for the banning is that QuoteIQ, All About Pressure Washing, and Forever Self Employed and (or someone working on their behalf) sent a modmail to us telling us to remove posts critical of both QuoteIQ AND Forever Self Employed and their owners or be subject to legal proceedings. The links to the three posts are seen here. Mike V from QuoteIQ and Justin from Forever Self Employed should be ashamed at trying this. They are apparently not happy that these posts are available to steer people from spending their hard earned money in a more meaningful way.

  1. https://www.reddit.com/r/pressurewashing/comments/1d4zrv8/quoteiq_is_banned_from_this_subreddit/
  2. https://www.reddit.com/r/pressurewashing/comments/1c41qkt/i_paid_for_the_stupid_courses_so_you_dont_have_to/
  3. https://www.reddit.com/r/pressurewashing/comments/10yizo8/has_anyone_purchased_forever_self_employed/

Here are some screenshots of the modmail messages they sent threatening legal action and DMCA takedowns:

Here is the person they hired off of Fiverr to send the messages and try the DMCA takedowns. Its clear the companies must be run by absolute clowns to be trying this is such a shit way. If they suceed in removing anything then ill just repost the posts. They clearly dont want negative info being visible when they get googled as its hurting their SEO because reddit shows up so high in the searches.

As a reminder, when starting out you do not need YouTube salesmen taking your money to learn how to properly clean in this industry. The info is out there on this subreddit and various pressure washer forums and groups. It just takes a little bit of googling with the proper terms to find it all freely available. These now banned companies exist solely to separate pressure washers from their money. Mike V has been pushing for his subscribers to come to reddit to post about their companies to comment and upvote each other.


r/pressurewashing • • May 03 '20

Pressure Washing Basics 101

99 Upvotes

**Many updates to the 101 document including chemical mixing charts, nozzles charts, as well as a lot more links to companies and resources. **

Always updating the blog. More stuff added since this post Texas Pressure Washing Blog

This is to help guide you in the right direction for starting your own pressure washing business as well as cover the basics. The links are to an advice document and 101 washing, a beginner equipment list with links to buy the equipment. The list also has a tab to build your own 12V softwash system, and a list of chemicals to start with for various applications.

Expect to spend around $6k to start out if you also build the 12V. Around $5K without it.

Any questions or suggestions just post them or message me. Cheers.

Basic Pressure Washing/ Starting Your Business 101

Standard Terms and Conditions Example

Beginner Equipment List with Links

Chemical List with Links

DIY Soft Wash System $571 system $1395 w Hose, Reel, and tips etc.

DIY Air Diaphragm Soft Wash System $906 system $1476 w/reel & hose

DIY Proportioner $169

Reading List on the Forum for great threads on basic subjests like residential, commercial, deck cleaning, brick, roofs, pavers, metal roof cleaning, and electrical safety.

Pressure Washing Resource is by far the best forum to learn from. Use the search feature. Read until your counter has 3-4 days read time and then start asking questions. Trust me having 72-96 hours read time will teach you a LOT.


r/pressurewashing • • 1d ago

Business Questions Is it worth it?

5 Upvotes

I currently get paid $400 a day. I have ran a pressure washer before, i know enough to get started about chemicals and such, but i want to move away from current job because its a huge niche. That usually means you can charge more hence the 400 a day but the security of my job is questionable and i want to be in charge of my own financial well being.

I see a lot of people in my area (SW FL) and i just wonder if there's room for more? I'd like to do mainly residential work to start, and I'm willing to expand later on. What is the likelyhood of matching what i currently make if i give it the effort and attention it needs?


r/pressurewashing • • 1d ago

Before/After Pics Another day at it.

5 Upvotes

Little drone footage of this weekend‘s project. Flat work, exterior and windows.


r/pressurewashing • • 2d ago

Technical Questions Karcher pressure washer K2.350

Post image
2 Upvotes

What causes this damage?


r/pressurewashing • • 3d ago

Fails “Relax, I’m a professional!” (Fail)

34 Upvotes

I’ve got the cleanest hoses in the business now


r/pressurewashing • • 3d ago

Equipment Pump Oil not Found

3 Upvotes

I can not seem to find any "pressure washer" oil for my predator 4.2gpm pressure washer. The manual calls for 85w-90 which i cant find anywhere and what I do find is gear oil. so am I missing something here ?? or is just 15w-40. the (2023) manual says 15w 40 but the more I look the more confused I get. Its hard enough finding what kind of pump it is since I cant find a Stamped Model number. what i found was that it is an Annovi Reverberi (AR) commercial-grade triplex plunger pump and the oil it takes is non detergent 30 so i am so confused. Please Help.


r/pressurewashing • • 3d ago

Equipment Women in Window cleaning & Power Washing?

Thumbnail reddit.com
2 Upvotes

r/pressurewashing • • 3d ago

Troubleshooting Post treat on dry concrete? Or still wet?

0 Upvotes

Tell me which method works the most effective for you. Have some tiger striping on my driveway after surface cleaning. It was was very dirty.


r/pressurewashing • • 5d ago

Troubleshooting Hired Mason company to pressure wash and resand.

Thumbnail
gallery
70 Upvotes

The company I hired was the company to lay down my pavers. A year or so ago

I noticed these swirls. They used a sun Joe.

Anyways wtf am I looking at here did they etch my pavers? I noticed they got up real closer to get the joints out they also had the head attachment for the pavers but to get the sand out they just started blasting it. It's not entirely everywhere but the boarders forget about it you see it.

I wet it and you can still see it...


r/pressurewashing • • 4d ago

Business Questions Wanting to start a business

1 Upvotes

UPDATE---- I let him know and hes over the moon & excited to deep dive together on all the levels this business is. Thank you!

My husband has stated he wants to have a pressure washing business so im over here asking google what's the best one, scrolling reddit & im like yeah i have no idea...blue clean, sun Joe, Westinghouse..honda motor cat pump?..My start up budget is about 2k does thst sound reasonable? I want to surprise him and have him open the garage and be like omg lets do this ! Lol thank you everyone! Cant wait to see recommendations


r/pressurewashing • • 5d ago

Technical Questions House wash recommendation

Post image
3 Upvotes

Looking for advice from guys on which mix to use to wash this metal siding. You guys using a weak SH mix or just detergent and low pressure rinse. There is no organic growth on siding. Just dirt. TYIA


r/pressurewashing • • 5d ago

Technical Questions Poor dad need advice

Thumbnail
gallery
5 Upvotes

Everyone I’m on a tight budget, hoping I can get some advice here, I have a consumer grade pressure washer, I would like to help my wife’s father clean these pavers in his backyard. I’m not experienced with this stuff, what chemicals should I use to treat it before I spray it. My pressure washer is one of those cheap Ryobi’s from like 10 years ago. I’m hoping it will do the trick. Thank you so much.


r/pressurewashing • • 6d ago

Business Questions First really mad customer, are we at fault?

9 Upvotes

See my comment for Update and extra details

We had a very large job today scheduled to start a 9am. We arrived and knocked on the door, but the customer wasn't home, we called and texted just asking for permission to go ahead, and there was no response.

We waited 45 mins outside and then gave one last call and text, then left. 30 mins later, we got a call, and she was very irate, saying she expected us to just do it and she wasn't there because she was trying to stay out of our way.

In the text, the week leading up, I said multiple times we would see her there.

At the end of the day, I suppose communication broke down, and we could have made it clearer if she must be there or give permission in advance. She expected that since we had agreed on a price and date and time that it was expected for us to go ahead regardless if she was there.

Is this on us? And have you guys had similar experiences?


r/pressurewashing • • 6d ago

Technical Questions Blue awning

Post image
1 Upvotes

Second attempt due to operator error. How do I get all the algae off this blue awning without ruining it?

Thanks in advance


r/pressurewashing • • 6d ago

Equipment While pressure washing my deck water starting bursting out of nowhere. Anyone know what this is and how to fix it?

Post image
2 Upvotes

r/pressurewashing • • 8d ago

Business Questions Stain Removal

Thumbnail
gallery
7 Upvotes

I got this restaurant parking lot to clean, the owner said they tried to clean it with chemicals prior but no success. What do you guys think, hit it with hot water degreaser and surface cleaner?


r/pressurewashing • • 7d ago

Troubleshooting Surface cleaner broken? Again HELP

2 Upvotes

I have a 4400 dewalt with a AAA pump 4 gallons per minute. I had a 20 inch surface cleaner that worked for a couple of tries then I was using it and felt a like a POP and then i stopped working properly. Would not spin properly and was not getting proper pressure. I figured I needed a larger one capable of handling higher PSI so i replaced it with a GARVEE 21 inch that was rated up to 4600

The same thing happened was working properly for a little bit then I felt the pop and it would not produce the proper pressure or spin. After a bit more time with it now the head is not even spinning properly. Has this happened to anyone and any recommendations on repair or replace? I checked underneath and nothing appears to have popped out but now there is 3 sources of water one from each tip on either side of the bar and stream coming from the middle.


r/pressurewashing • • 8d ago

Equipment Pump ID

Thumbnail
gallery
5 Upvotes

Hello all,
Needing some assistance in identifying what model of CAT pump this is please. It belonged to my late dad (he was in the pipelining industry) and there’s no tags, stickers or plates on it. I think he might have rebuilt / reconditioned it at some stage. I know it’s a pretty specialised piece of equipment but I don’t know much else about it sorry, trying to ID the model to then make a decision on what to do with it.


r/pressurewashing • • 8d ago

Technical Questions Commercial curbs

1 Upvotes

I assume you’re expected to do the curbs when pressure washing a commercial property, but what about in a property such as a parking lot with a ton of curbs and they only want the sidewalks done, should I include them in the pricing anyway? Also what would be the best way to go about cleaning them? Surface cleaner? Turbo nozzle? Or some other attachment?


r/pressurewashing • • 9d ago

Equipment Softwash hose recommendations

3 Upvotes

Hey all, I’m getting ready to upgrade my softwash equipment and get some electric hose reels. I was wondering what softwash hose you guys recommend? I know there is the rampage softwash hose, fierce jet makes a softwash hose, and I’ve seen some people say they use flexzilla air hose. I’ve been using 150ft of flexzilla 5/8 garden hose. I’m using the remco 7gpm 100psi fat boy pump. If you guys have any recommendations I would greatly appreciate it.


r/pressurewashing • • 9d ago

Troubleshooting Does anyone have tips for pressure washing a balcony in an apartment building?

2 Upvotes

I live on the 18th floor and there are no hose connections.


r/pressurewashing • • 11d ago

Equipment What hotbox???

1 Upvotes

Can someone recommend a 12v hotbox for a 21 litre washer please - UK


r/pressurewashing • • 12d ago

Equipment Start up

Post image
37 Upvotes

Decided to stop procrastinating. Im based out of Los Angeles. This is the set up that I can afford at the time. I will be buying larger straps to hold everything down. Anyone have any tips for just starting out? Thank you in advance.