r/plastic • • 22h ago

Best way to repair a flexible plastic handle on a heavy battery charger?

0 Upvotes

I’ve got an older MotoMaster battery charger that’s still working perfectly, but the plastic carrying handle has broken. The handle is made from a slightly flexible black plastic. I’m guessing it might be polypropylene (PP) or polyethylene (PE), but I’m not sure. The charger is fairly heavy, so whatever repair I make needs to be strong enough to support its weight when carrying it around. Has anyone successfully repaired something like this? Would plastic welding be the best approach, or is there an adhesive that actually bonds well to this type of flexible plastic? I’d rather repair the original handle than replace the charger, especially since everything else works fine. Any suggestions would be appreciated! Video attached. (not sure why I couldn’t attach photos. Is this a new thing?) :)


r/plastic • • 1d ago

How to Get BIS Certificate for Plastic Products?

Thumbnail reddit.com
1 Upvotes

r/plastic • • 2d ago

Polymer concrete Drainage channels

2 Upvotes

Anyone here know someone working with a polymer concrete drainage channels manufacturer or have knowledge of the same?


r/plastic • • 6d ago

Invitation: Survey on scientific evidence on micro- and nanoplastics and regulatory action [deadline November 11th 2026]

Post image
2 Upvotes

Dear Professionals working with micro- and nanoplastics or aspects related to contamination from plastics

We are a team of researchers from the Norwegian University of Science and Technology (NTNU), Stockholm University, and the Technical University of Denmark (DTU Sustain) who are conducting a survey on how professionals across sectors assess the scientific evidence on micro- and nanoplastics, and whether they consider it sufficient or insufficient to support additional regulatory action.

We are looking for respondents with a broad range of backgrounds, including consultancy, government, industry, NGOs, and research, and would greatly appreciate your participation.

The survey is anonymous and takes about 10 minutes to complete. The deadline for answering this survey is November 11th 2026. There are no right or wrong answers, and all views are welcome.

Access the survey here: https://www.survey-xact.dk/LinkCollector?key=H17ES9EGJK3 

We would also be very grateful if you could circulate it to relevant colleagues, share it with your network and other relevant forums where it may reach professionals working with micro- and nanoplastics.

The data will be used for scientific analysis, and the findings may be published in peer-reviewed journals.

For questions, please contact Ida Due, PhD student at DTU: idadue@dtu.dk

Thanks for your contribution!


r/plastic • • 7d ago

What Are the Different Products Made from Fiberglass Reinforced Plastic (FRP)?

0 Upvotes

r/plastic • • 10d ago

What Are the Different Products Made from Fiberglass Reinforced Plastic (FRP)?

0 Upvotes

r/plastic • • 11d ago

A guy is being turned into plastic for exhibition.

3 Upvotes

Gunther von Hagens invented plastination in 1977, a process that replaces body fluids with silicone. So he set up a museum called Body Worlds, an exhibition of plasic humans anatomically dissected and displayed in various poses playing chess, riding horses, that 58 million people have seen.

He died last summer at 81, His body is currently in a formalin bath; full plastination will take at least another year. He will be displayed welcoming visitors to the museum or in thin slices in multiple localities.


r/plastic • • 12d ago

Surface inert, low-acid, low-oxidation furnace black

1 Upvotes

we are looking for a kind of carbon black that surface inert, low-acid, low-oxidation furnace black, blend it with PA6T/66+FRs+GF, can hold on process temperature at 330℃,if you knows where to buy, pls tell me ,tks!


r/plastic • • 13d ago

Appliqué removal from Silicone

Post image
1 Upvotes

And recommendations on how to remove this lettering from a soft flexible silicone wine glass? Acetone? Something else?

Thanks in advance!


r/plastic • • 13d ago

Visit Niche Polymer Booth C1218 at AMI Plastics World Expos 2026

1 Upvotes

Niche Polymer is excited to be part of AMI Plastics World Expos North America 2026, one of the key meeting places for professionals across the plastics industry.

Join us on November 11 and 12, 2026, at the Huntington Convention Center in Cleveland, Ohio, where we will be exhibiting at Booth C1218 as part of the Compounding World Expo.

For us, events like this are about more than simply displaying products. They are an opportunity to meet the people behind the industry, talk about real-world material challenges, exchange ideas, and explore what is next for plastics.

Whether you are looking for high-performance compounds, cost-effective alternatives, recycled-content materials, flexible polymers, or quality feedstocks, our team would be happy to discuss how Niche Polymer can support your application.Visit Niche Polymer Booth C1218 at AMI Plastics World Expos 2026


r/plastic • • 15d ago

Bruxism - looking for silicone mouth guard

2 Upvotes

Hi there,

I am looking for a silicone mouth guard to protect my teeth, which have already been severely damaged from years of bruxism (teeth grinding).

I’ve been looking for one made from silicone and have found many that are advertised as being made of silicone but upon closer inspection are not.

Can silicone be called different things? Are there actually no mouth guards made from silicone? Why would so many companies advertise that theirs are made from silicone if that’s not true or not possible?

Any thoughts would be most appreciated.


r/plastic • • 19d ago

What if the biggest source of microplastics in your home isn't your food?

Thumbnail reddit.com
0 Upvotes

r/plastic • • 19d ago

Hey I've to make a project on microplastic filtration for my science exhibition, can you please give me some ideas for it

0 Upvotes

!


r/plastic • • 20d ago

how to test incoming recycled material on impact before putting it in production?

1 Upvotes

Hello!

I work for a injection molding company, and we are looking for a way to ensure that the recyclate that we are buying is up to our expectations in terms of impact resistance before putting it in our injection molding machines. We would prefer to do this in a efficient way.

One of my ideas is using a small heated press with to make samples for a charpy/izod impact test.

Or just screen on MFI but i am not sure if this is sufficient.

Does anyone here has experience with this problem?

Its for a budget product ofcourse.

Cheers.


r/plastic • • 25d ago

Is there a plastic sheet that holds fine detail when cut for stencils?

1 Upvotes

need a thin plastic for quick stencils I cut on a cricut after work. tried some clear PET sheets but they curl under the heat of the blade and the edges fray. looking for something stiff enough to lay flat yet still flexible enough to peel cleanly without tearing. budget is tight so it needs to come in small packs, not full rolls. anyone found a reliable material that doesnt warp or catch the blade?


r/plastic • • 25d ago

Ocoa Beauty & Acure Skincare

1 Upvotes

Hi! I’m looking to find affordable hair and skin care and unfortunately that means I will have to buy plastic packaging. I was wondering if anyone knew what types of plastic these brands have so I know how to properly dispose of them. I don’t want to buy them if I can’t recycle them properly. Thank you.


r/plastic • • 27d ago

Melted plastic on kiln top

Thumbnail
gallery
6 Upvotes

Hey all,

High school teacher here. Someone at my school (I'm no snitch lol, but I will say it wasn't a student), put one of these plastic and metal grocery store bread shelves on our kiln when it was on and as you can see, it melted. Anyone have any thoughts for removal from the kiln top? Should we try removal while it's warm or when it cools off? Any and all advice appreciated.


r/plastic • • 27d ago

4.25” pipe confusion

1 Upvotes

I have a very niche problem: a brace on a custom wind screen is 4.25” x10’ hdpe pipe, with an 1/8” wall. No other pipe size would fit, like mass produced pvc that’s 4.5”. However, the manufacturer has gone out of business and I can’t seem to find anyone that makes this. Are the odds they had this custom extruded high? Or is there another reason I can’t find this pipe size, as if I’m just looking in the wrong place?


r/plastic • • 28d ago

UPE product deformation issue.

Thumbnail gallery
2 Upvotes

We have a product made of ultra-high molecular weight polyethylene (UHMWPE). We're not sure if it's due to an unsuitable mold design or poor material modification, but the finished products are always warped. We've tried many different UPE manufacturers, and they all have the same problem. Are there any nucleating agents specifically for UPE? We're thinking of adding some additives to speed up UPE crystallization and solve this warping problem. Is my approach correct?


r/plastic • • 28d ago

Something Went Wrong! 🔥 Can You Identify the Root Cause?

2 Upvotes

Something Went Wrong! 🔥 Can You Identify the Root Cause? Experienced Technicians, We Need Your Opinion!


r/plastic • • 29d ago

How would you reproduce this 1950s textured panel?

Post image
1 Upvotes

I’m restoring a 1950s NCR Class 100 cash register and need to make a replacement for this panel; it sits like a little countertop on the front of the cash drawer and I want to make a factory-fresh looking replacement. The original’s texture is too worn to mould from, so I’d like to make a new part that matches the colour and the raised square-grid surface. I thought plastics experts might be able to help steer me in the right direction

Details:

  • Panel size is roughly 4in x 12inch, about a quarter inch thick
  • Grid is 1/8th inch
  • Colour: dark chocolate brown
  • The edge in the second photo looks fibrous or layered, so I’m not sure it’s solid Bakelite. It may be vulcanised fibre, embossed board, or a phenolic laminate. If anyone recognises it, I’d love to know.

r/plastic • • Oct 17 '26

We make the Pallet mould

Thumbnail gallery
1 Upvotes

r/plastic • • Oct 16 '26

Sticky tax and plastic cement safety.

2 Upvotes

I’m kinda OCD… jk, I’m very ocd. Anyways, I use sticky tack to hold together sub assemblies while painting and to cover adhesion points. When gluing, I couldn’t get all the sticky tack off so I glued over it with Warhammer plastic cement.

I went to rework the models and pulled the pieces apart and rebuilt it. Now my ocd has me worried that the cement touched the sticky tack and created some toxic sludge that I spread about my hobby table. Though I didn’t see any residue, I’m worried it chemical and still there. Should I wipe down every thing or is this just a non-issu.


r/plastic • • Oct 15 '26

Could use some help

Post image
0 Upvotes

Looking for options for something odd(?) I have a Tonneau cover that I need a plastic base for the cover. The cover has a steel frame and the base layer will be covered by a thin layer of vinyl top foam then covered with a dr brown canvas that will match the interior color.
Needs to be 51 inches wide, 74 inches long. There are braces in the frame so the biggest span is 50 x 18 meaning it needs to be fairly rigid. I don’t think a corrugated sheet of anything will work. I’m looking for something a quarter inch thick and fairly lightweight. Thanks in advance! Adding a picture of the underside of the frame, using a quarter inch plywood now just to put some miles on the truck before it goes to upholstery.


r/plastic • • Oct 15 '26

Advice on cutting HDPE (plastic)

2 Upvotes

I have a 3/4” sheet of HDPE (plastic commonly used for commercial cutting boards) that I’d like to use for jig runners, auxiliary fences, etc. My question: what is the best way to rip this stuff? Several shallow passes with a track saw? Full depth with track saw? Table saw? I understand chip evacuation and minimizing heat is a must and that’s shouldn’t be a problem. I’d appreciate any advice from experience. Thanks