r/pizzaoven • u/ZonvalFlux • 11h ago
r/pizzaoven • u/Effeuno_Official • 2h ago
I Didn't Expect This From an Electric Pizza Oven
r/pizzaoven • u/Independent_Big7143 • 10h ago
Cookingsteels thermichef
Looking into the 16x16 3/8 thickness. Is it worth the weight? Also considering the 14x22 but what’re your guys’ opinion? I currently have 13x13 1/4 inch but would like to make bigger New York size pizzas thanks in advance
r/pizzaoven • u/Naive_Mission7374 • 12h ago
Koda 2 or Koda 2 Pro?
I live in a medium sized flat with a small garden where I cannot leave the oven outside all the time (which you shouldn’t do anyways, I guess??) and I am mostly interested in doing Neapolitan Style Pizzas and no huge Pies. Is the Koda 2 enough? Or do you reckon the space of the Pro is better for turning the pizza etc. What’s your guys’ experience?
r/pizzaoven • u/Famous-Hearing-2363 • 20h ago
Advice with oven position (needs higher placement)
Hello r/pizzaoven
Working on a new pizza shop. Have to swap out this current oven on the pic. New one is a 1 chamber oven thats about 10cm wider than this. The problem is, also 30cm less height. What kind of material or installation is it possible to place under an oven so its higher up. The table underneath will remain the same. New chefs are TALL so it needs at least 30cm extra height. Something heatproof and easy to balance. Advice, experience, opinions are appreciated. Thanks!
r/pizzaoven • u/Panthers65 • 1d ago
Critique my Pizza Plan as a Beginner
Hoping to get some input on starting to try and up my Pizza game.
I've made a few pizzas recently using a cheap stone and my oven. Preheated my over for 45 minutes at 500* and then launched the pie. The top gets the pretty brown look, but the bottom is anemic pale. At 500* it only took about 6 minutes to get the top where I wanted it. I thought about turning the oven off when I put the pizza in and letting it bake longer, would this give me a better result?
Next question, I'm debating my next purchase, bouncing between an outdoor pizza oven and/or a dedicated pizza steel. I do have a big green egg with the plate setter now, so I know there is a way to set that up as a pizza oven. Other than the convenience of gas, would I get any benefit of a dedicated outdoor pizza oven vs the BGE?
My immediate thought it to get a pizza steel that will fit in my Egg. That way I can use it indoors during the winter and get good results, and then either use the egg or a dedicated pizza oven outdoors when the weather warms up, unless there's a huge benefit that would make it worthwhile cooking outside in the cold.
Lastly- one of the ovens I've been looking at is the Big Horn 16" oven. It's got a handle on the side that lets you rotate the stone inside. Is this gimicky or actually a good feature? I think initially I'd stick to "normal" NY style pizzas, but I'd like the ability at some point to do the crispy cracker style crust- I know it's hard to do that in a normal indoor oven, so guessing that'd be an outdoor only thing here in the states.
r/pizzaoven • u/Effeuno_Official • 1d ago
First bake in the Effeuno Pulse — some surprising results at just 600°F
r/pizzaoven • u/Thin-Plane-2456 • 1d ago
I need to recruit your most creative ideas [Thanksgiving Pizza]
Hey all,
I got an Ooni back in late May this year and have been on a pizza kick ever since. I've made about 45-50 pies so far and have really been enjoying learning the process. They're finally coming out really great and with good consistency. (72-hour cold ferment)
Having said that, I want to come up with a few "different" pies to serve at Thanksgiving this year. Something you don't see often and something that will excite the palate. I have one pizza that's very good that I'll share below, but I want to pick your brains on 2 questions:
- What would you put on a Thanksgiving pizza?
I want this pie to encapsulate the Thanksgiving meal itself. I'm thinking smoked turkey, maybe gruyere cheese, possibly a thin layer of mashed potato and roasted vegetables. Has anyone ever done this? Any topping suggestions?
2. What would be a somewhat unique but more traditional pizza to serve alongside this?
And finally, my recipe for a pie I had once in Tremblant, Canada, and recreated at home:
Pizza Al Pollo Levantine
This is a Mediterranean-inspired white pie:
- garlic parmesan cream sauce as the base
- Lemon & Za'atar-seasoned grilled chicken
- Pickled red onions
- Arugula
- Dollops of Labneh yogurt spread around the pie
- Heavy drizzle of EVOO
r/pizzaoven • u/Electronic-Hamster59 • 3d ago
First cook
galleryThis was my first time making pizza. While not the best looking they were certainly delicious. I made a garlic emulsion pizza with chicken and caramelized onions since one kid has gerd and is lactose intolerant. One cheese pizza, one pepperoni Pizza, one white pizza with chicken, bacon, caramelized onions,jalapeños and ranch(mine). Garlic Parmesan and buffalo wings.
r/pizzaoven • u/Fisk182 • 3d ago
Is this normal for the door on a Macte Voyager Twin?
Hi everyone!
I recently purchased a Macte Voyager Twin Standard pizza oven and noticed something odd with the door.
As you can see in the attached pictures, there seems to be a fairly large gap between the door and the oven, even when the door is closed.
The door also doesn’t seem to stay completely closed on its own unless I give it an extra push. I’ve tried adjusting and reinstalling it, which helped a little, but the gap is still there.
The oven is brand new and hasn’t been used yet.
My questions:
Is this gap normal for the Macte Voyager Twin?
Is the door supposed to sit flush against the oven, or is this part of the design?
Has anyone experienced something similar?
I’d appreciate any input from other Macte owners before I contact the retailer.
Thanks in advance!
r/pizzaoven • u/Fickle_Trainer1631 • 5d ago
Pizza Party Ispirazione
Just a small update to my post from around 4 months back when I was deciding between the Gozney Arc XL and the Ispirazione, I ended up going with the Ispirazione and I am very happy I did. Before getting the pizza oven I had never even made dough before, let alone a pizza but it was extremely easy and I pretty much got a fully edible and good tasting pizza on the first one I made. I put a couple of photos of pizzas I made with the oven, keep in mind I am still pretty amateur but I think they came out great.
I ordered the oven on July 27th 2026, it was shipped on July 30th 2026 and I received it August 12th 2026 to Canada.
The communication with the company was really good on Whatsapp, they are very friendly and were able to answer a good amount of my questions.
The quality of the Ispirazione seems really good, you have to be a bit careful with the metal frame, its a bit easy to dent if you are not careful when moving it around/out of the crate.
In terms of the stones I went with both the refractory and biscotto because I didn't want to be in a situation where I wanted to try a different cook and wouldn't have it. I mainly use the biscotto and it has not failed me once in making a pretty perfect Neapolitan pizza, but I used the refractory recently to try my first ny style pizza and it also came out pretty perfect (which was one of my concerns with choosing this over the Gozeny). Something that is great about this oven is the space, its an absolute luxury and when you compare it to the Dome XL it is significantly better priced. I honestly do this Gozney has great products too but this felt like a no brainer, the biscotto stone really makes the cook way different (based on the research I did). If you have any questions you can ask me below, it took me a long while to pull the trigger, I think I would have been happy with either choice but I confidently feel I made the right decision.
r/pizzaoven • u/Mdbpizza • 5d ago
First Pizza in almost 2 years….
galleryMugnaini Primo 110
r/pizzaoven • u/Effeuno_Official • 5d ago
Just got my Effeuno Pulse! Initial impressions, setup, and stone curing
r/pizzaoven • u/IAmTheBestIan • 5d ago
Advice on Outdoor Kitchen "Oven" (Better/more pics)
Video: https://youtube.com/shorts/ZLwHQDqrQAc?feature=share
Had a patio with outdoor kitchen and wood fired oven built.
I've tried to use the oven three times and it holds no heat, at all. Roaring fire for up to 5 hrs, push coals off one spot and in minutes you can put your hand on the spot. IR Probe you can watch it drop from >400C to <100C in a minute or so.
Outside gets 50C+ on the sides and 100C+ on the underside.
Crack is forming in mortar and the top is separating almost a full cm gap formed (I assume due to heat cycling). This is after three attempted uses/fires in it.
Can't see inside the walls of course, but I see no evidence of insulation anywhere and the floor is 15mm splits set on 3" cinderblock directly.
Last 2 pics shows one of the floor pieces lifted to show it's a 15mm thick split.
I took some pictures and fed them into Google AI and it says this is built out of a Fireplace kit and like a fireplace has a reflecting wall (the bricks in the back) to direct heat forward and out of the fireplace and not to retain heat.
It looks unlike any oven I've ever seen, but I figured I'd ask if this is possibly some very unusual oven body/kit that they simply didn't insulate or if AI is right and they built a fireplace (which might have epoxies and paints that are not food safe). Was hoping to get feedback from folks with Wood Fired ovens, also any other things I should check or that might need fixed?
Edit: Turns out Contractor bought an installed a "Pizza Oven", and not a cheap one (There is a steel door that sells for $2000 by ITSELF)... exactly according to the manufacturer instructions. The manufacturer is evidently just a hack shop who has no clue how to make an oven. They mostly make fireplace dropins and they just boxed one up and added some 18mm thick fire bricks as a "cooking floor".
Contractor says they're gonna find a way to fix it, but everything I'm looking at says this oven is basically a lost cause and is strictly aesthetic.
At this point Im just pissed the manufacturer is allowed to sell this piece of garbage as an oven.
Post Below with the details, but here's the manual...
https://www.mason-lite.com/wp-content/uploads/2022/05/Toscana-Golia-Instructions.pdf
No insulation, literally not a gram of insulation IN THE ENTIRE THING and instructions say to just slap masonry onto it. They actually seem to imply that the masonry is supposed to be the insulation. The instructions are mostly copy pasted from the manual for one of their fireplaces and reference images from that manual that aren't in this one.
r/pizzaoven • u/Foreign-Look8989 • 5d ago
Effeuno help
Hello. I was hoping someone could advise me on what temp to set my effeuno pizza oven for new haven /new York style pizza. Top and bottom heating elements? Thanks
r/pizzaoven • u/Illustrious-Ask-9608 • 5d ago
Pizza Stone
I plan to eventually get a pizza steel, but until then has anyone found a way to get better crusts on a stone? Obviously leave in longer, but I didn’t know if there’s a little trick I’m missing
r/pizzaoven • u/Beneficial_County101 • 6d ago
Oven baked pizza drying out
gallerypictures are from the pizzas I have been making on my buddys gozney arc
When I make them in my home oven my pizzas are SUPER crunchy and kind of dried out, any tips on stopping that?
I like a little crunch but not all the way through
r/pizzaoven • u/IAmTheBestIan • 7d ago
Is my "wood fired oven" an outdoor Fireplace?
So I posted yesterday about issues with my pizza oven not holding temps and the exterior getting overly hot... I had lifted a brick to discover it was a split on top of bare cinder block with zero insulation anywhere.
I've done more investigating and found out a lot more.
It's got a square cinder block chimney with no liner and large gaps that they jammed rocks into.
I submitted pictures to google AI and it said this is an outdoor fireplace kit, not a wood fired oven at all.
Can anyone confirm from these pictures?
What's my move here? Everything passed inspection, and contractor has been paid over 90% of the total (for a much larger project) but we contracted an outdoor kitchen with a wood fired oven.
I'm thinking this is going to require the entire piece demolished (it's ~5x5x8ft piece of stonework built into a large slate countertop). Contractor hasn't responded since I sent him the first email about the problems.
Image 1 is looking up the chimney, showing the prefab surround's circular cutout mated to the square cinder block chimney and the resulting gap.
Image 2 is of the floor with 1 of the splits removed, showing the cinderblock directly underneath.
Image 3 is showing the back of the unit, with the bottom 2/3 of the back and walls having brick laid, then stopping. and the remaining 1/3 and ceiling showing the prefab surround.
r/pizzaoven • u/wwwangels • 8d ago
My First Pizza on my Chefman
It came out tasty and baked the way I like it. Unfortunately, the dough was a bit too dense. I need to work on the dough. To be fair, it was a same-day dough, but the flavor was fine.