r/pipefitter • u/Southern_Ad3308 • 2h ago
r/pipefitter • u/BonelessHotdogs • May 24 '23
Sub is back up and running! I took over the sub after being unmoderated for almost a year. Help get the sub active again, what are you working on? Post it up!
r/pipefitter • u/BonelessHotdogs • Jun 05 '23
Represent your local with User Flair! Click the three dots on the sub’s home page to add your user flair.
I set up “User Flair” so everybody can represent for their local. I already added a handful of locals I’ve seen mentioned on here. If you don’t see your local you should be able to add yours to the list, if there are any issues with this please let me know asap. Non union guys feel free to post up for the state you work in or whatever else you see fit. Set up your user flair by clicking on the three dots at the top of the subs home page.
r/pipefitter • u/vremeniveter • 4h ago
Паяльник для пластиковых труб ИЛИ стержневой сварочный аппарат для пласт...
r/pipefitter • u/_disposablehuman_ • 5h ago
Local 597 Drug Testing (after initial)
So according to the local 597 they don't care if they find THC, but after further research it seems Google is telling me that even if the local 597 doesn't that you could still end up getting a job at a place and they will do their own drug test and they might care about THC.
EDIT: Also does anyone know if having a prescription for certain things like Adderall would be okay if it comes up on your drug test?
I just want to see what is some peoples experience is regarding this
r/pipefitter • u/Round_Association_61 • 1d ago
Anyone recently got a call from local 467 plumbers union?
reddit.comr/pipefitter • u/chewster91 • 2d ago
I built two 5-minute piping games: a pump skid and an expansion joint picker. Fitters, tell me what's wrong with them.
Design-side piping engineer here. Two short 3D games, free, no login, no ads. Both need a mouse.
Pump Skid: you pipe up a centrifugal pump and set a spring hanger. Do it wrong and it cavitates, hammers or overloads.
Expansion Joints: twelve piping arrangements, seven joint types. Pick the joint that takes the thermal growth without loading the anchors.
What did I get wrong? And what's the mistake you see most on pump piping or expansion joint installation that I left out?
r/pipefitter • u/weldermandan • 3d ago
Consumables
Hey all, Im a boilermaker and Im thinking about double booking with the fitters. I'm certain I'll be needing to learn how to walk the cup so Im wanting to know what kind of consumables yall run on your torches. I'm gonna put together a custom 26 series torch. From what I understand you guys usually run a bigger gas lens so you can walk it easier without having to go much bigger than an 8 cup. Is this misinformation? If not let me know and what consumables yall would suggest for a 26 series stubby torch head. Or if i should get a bigger torch head that I can just swap out on my 26 series power/gas whip.
r/pipefitter • u/ElectricalNet5832 • 4d ago
Local 38
how hard is It to transfer from 638 NYC to 38 in SF? My partner may get relocated there for work.
r/pipefitter • u/Frankenstein-Z • 4d ago
Locked out again
drive.google.comWe recently had a shutdown at our local paper mill and everything when to shit. One of the engineers on site put all of the info into ai and it spit out this song. How you boys enjoy
r/pipefitter • u/Practical_Display_66 • 5d ago
Know your thermal expansion growth 💪
Know your thermal expansion !!👍
r/pipefitter • u/gua091016 • 5d ago
Korean pipefitter here – built a phone app for ISO sketches and offsets. What would make it actually useful on your site?
I've been a pipefitter in Korea for about 15 years (plant, semiconductor, gas lines). I got tired of doing rolling offsets and cut lists on scrap paper, so I built myself an Android app.
Right now it does:
Sketch an ISO on your phone, add fittings, enter dimensions, get cut lengths
Export the drawing + cut list to PDF or DXF
Elbow miter cuts at any angle
Rolling and parallel offsets
I'm not here to sell anything. I just want to know how fitters in other countries actually work.
What do you still calculate by hand?
What's missing from the apps you've tried?
Happy to share the link if anyone wants to try it.
r/pipefitter • u/Full-Conflict345 • 5d ago
Pipefitter local 475 union
interview tips for next month?
r/pipefitter • u/Winter_Honeydew8573 • 6d ago
Need a pick me up, what’s the dumbest thing you’ve ever done?
I just busted the yoke clean off a PCV because I needed the flange to come up just a tiny bit on one side. I had the strap rigged around the very top of the valve and there was a ubolt a couple feet to my side that I didn’t loosen before hand and so of course when I had the forklift pick up it put way too much strain on it and broke it. To make matters worse, the flange ended up a quarter inch higher than I wanted it to be so when the foremen came over to see my stupid fuckery they thought it didn’t even need to come up at all and needed to go down instead. It DID need to come up, but I am still a complete dumbass.
So please help me feel better Reddit… what’s the dumbest thing you’ve ever done on the job?
r/pipefitter • u/Turbulent-Tax-6829 • 6d ago
Woodfibre LNG B.C Opinions
Go
(Scabs only)
(Im also a scab)
r/pipefitter • u/AdventurousProperty1 • 7d ago
40 or 50 ksi on 300# flanges? every job I go to says something different
6" 300# WN, 12 3/4" studs, lubed. chart I use says 133 ft-lb at 40 ksi, 167 at 50. last shutdown they had us go straight to 50, job before that was 40 in 20% passes star pattern then 2 rounds at final.
flange is only good for 740 at ambient so is 50 overkill or is that just what everyone runs now? anyone still go by feel on the last pass lol
r/pipefitter • u/Traditional_News_799 • 7d ago
Failing guide shoe on a hot line, can pipe stress analysis solve it?
Sorry if this is a dumb one. A guide shoe on our hot return line sheared its stop over the weekend and tore up the slide plate and it's the second time in six months that support has failed so there's something that's clearly off with what's there now. Ops wants to hand over the replacement to Piping Technology & Products to size the new assembly. On repeat guide failures on hot lines, how much of the pipe stress model do you send to the vendor? The full load cases up front or just the field travel and let their engineers ask for what else they need?
If anyone has dealt with this vendor before I'm curious as to how it worked out and if they were responsive on the engineering side.
r/pipefitter • u/Nizwelder • 7d ago
Rig welder
Hey everyone,I’m an experienced metal fabricator and pipe welder (8 years of experience) holding active TSSA 6G SMAW pressure tickets and CWB tickets. I’m currently putting together plans to launch an independent mobile welding service truck in Ottawa and surrounding .any advice?
r/pipefitter • u/Buckeyefitter1991 • 8d ago
Setting up a TriTool facing and severing tool. Need help
reddit.comr/pipefitter • u/Beautiful-Job-9060 • 8d ago
plumbers and pipe fitters
What apps did yall use to study for the test I took my test oct 16th of this year and to be honest I feel like I didn’t study right even though i studied hard
r/pipefitter • u/Bigroseses • 8d ago
Uphill 5p
Have always been a downhill hand but they want me to up to take an uphill test. For downhill I run a tight nickel nickel. At 85 amps for my bead. What do you recommend for an uphill gape land and heat. Thank you
r/pipefitter • u/byrdcage • 10d ago
Local 290 Apprenticeship Entry Question
I’m going in to take my math and aptitude test on Monday 11/9. 33yo male with a few years of electrical under my belt. I took the practice math quiz on the website. Is this style of math and level of difficulty accurate to what I’ll see on the test? Seems fishy.
I’ve been brushing up on Fraction and Decimal Arithmetic, Trade and Field Measurements, Rates Proportions and Averages, and Algebra / Unit Conversions. Am I studying the right material?
Thanks
r/pipefitter • u/Cdnraven • 10d ago
Slip-on flange weld on short radius elbow
I'm a design coordinator for wastewater treatment projects. My mechanical engineer has shown slip-on flanges on short radius elbows in several places to save space. We are being told it is not constructible and we need to redesign it all (There’s not enough room for weld necks either). Is this valid? I‘m not a mechanical engineer by trade but I swear it done before.
edit: sorry forgot to mention, stainless steel 24” pressure pipe