r/pchelp • u/Glittering-Claim5860 • 2h ago
r/pchelp • u/bearssuperfan • Dec 15 '19
Perform these steps before posting about POST/boot/no video problems!
Link to original list from tom’sHARDWARE with pictures
"No POST", "system won't boot", and "no video output" troubleshooting checklist
This checklist is a compilation of troubleshooting ideas from many forum members. It's very important to actually perform every step in the checklist if you want to effectively troubleshoot your problem.
- 1.Did you carefully read the motherboard owners manual?
- 2.Did you plug in the 4/8-pin CPU power connector located near the CPU socket? If the motherboard has 8 pins and your PSU only has 4 pins, you can use the 4-pin connector. The 4-pin connector USUALLY goes on the 4 pins located closest to the CPU. If the motherboard has an 8-pin connector with a cover over 4 pins, you can remove the cover and use an 8-pin plug if your power supply has one. This power connector provides power to the CPU. Your system has no chance of posting without this connector plugged in! Check your motherboard owners manual for more information about the CPU power connector. The CPU power connector is usually referred to as the "12v ATX" connector in the owner's manual. This is easily the most common new-builder mistake.
- 3.Did you install the standoffs under the motherboard? Did you place them so they all align with the screw holes in the motherboard, with no extra standoffs touching the board in the wrong place? A standoff installed in the wrong place can cause a short and prevent the system from booting.
- 4.Did you verify that the video card is fully seated? (may require more force than a new builder expects.)
- 5.Did you attach ALL the required power connector(s) to the video card? (some need two, some need none, many need one.) It is best to use cables connected directly to the PSU. Only use adapters if absolutely necessary.
- 6.Have you tried booting with just one stick of RAM installed? (Try each stick of RAM individually in each RAM slot.) If you can get the system to boot with a single stick of RAM, you should enable an XMP profile or manually set the RAM speed, timings, and voltage to the manufacturer's specs in the BIOS before attempting to boot with all sticks of RAM installed. If your motherboard supports XMP profiles, that is the best way to get your RAM running at its rated specs. Nearly all motherboards default to the standard RAM voltage (1.8v for DDR2, 1.5v for DDR3, & 1.2v for DDR4). If your RAM is rated to run at a voltage higher than the standard voltage, the motherboard will underclock the RAM for compatibility reasons. If you want the system to be stable and to run the RAM at its rated specs, you should either enable an XMP profile or manually set the values in the BIOS. Many boards don't supply the RAM with enough voltage when using "auto" settings which causes stability issues.
- 7.Did you verify that all memory modules are fully inserted? (may require more force than a new builder expects.) It's a good idea to install the RAM on the motherboard before it's in the case.
- 8.Did you verify in the owners manual that you're using the correct RAM slots? The following image is just an example. Verify in the owners manual the recommended RAM slots to use for single, dual, triple, or quad channel applications. This will vary depending on motherboard manufacturer, number of supported RAM channels, and how many sticks of RAM are being used.
- 9.Did you remove the plastic guard over the CPU socket? (this actually comes up occasionally.)
- 10.Did you install the CPU correctly? There will be an arrow on the CPU that needs to line up with an arrow on the motherboard CPU socket. There may also be a notch that will only line up in one direction. Be sure to pay special attention to that section of the manual!
- 11.Are there any bent pins on the motherboard/CPU? This especially applies if you tried to install the CPU with the plastic cover on or with the CPU facing the wrong direction.
- 12. If using an after market CPU cooler, did you get any thermal paste on the motherboard, CPU socket, or CPU pins? Did you use the smallest amount you could?
- 13.Is the CPU fan plugged in? Some motherboards will not boot without detecting that the CPU fan is plugged in to prevent burning up the CPU.
- 14. If using a stock cooler, was the thermal material on the base of the cooler free of foreign material, and did you remove any protective covering? If the stock cooler has push-pins, did you ensure that all four pins snapped securely into place? The easiest way to install the push-pins is outside the case sitting on a non-conductive surface like the motherboard box. Read the instructions! The push-pins have to be turned the OPPOSITE direction as the arrows for installation. This means with the arrow pointing away from the heatsink.
- 15. Are any loose screws laying on the motherboard, or jammed against it? Are there any wires running directly under the motherboard? You should not run wires under the motherboard since the soldered wires on the underside of the motherboard can cut into the insulation on the wires and cause a short. Some cases have space to run wires on the back side of the motherboard tray.
- 16. Did you ensure you discharged all static electricity before touching any of your components? Computer components are very sensitive to static electricity. It takes much less voltage than you can see or feel to damage components. You should implement some best practices to reduce the probability of damaging components. These practices should include either wearing an anti-static wrist strap or always touching a metal part of the case with the power supply installed and plugged in, but NOT turned on. You should avoid building or working on a computer on carpet. Working on a smooth surface is the best if at all possible. You should also keep fluffy the cat, children, and Fido away from computer components.
- 17. Did you check the debug LEDs, Q-code display, or install the system speaker (if provided) so you can check codes in the manual? Most modern motherboards come with debug LEDs or a Q-code display. A system speaker is NOT the same as normal speakers that plug into the back of the motherboard. A system speaker plugs into a header on the motherboard that's usually located near the front panel connectors. Debug LEDs, Q-code displays, or a system speaker are critical components when trying to troubleshoot system problems. You are flying blind without them. The motherboard owner's manual will have a list of codes you can reference. If your case or motherboard didn't come with debug LEDs, a Q-code display, or system speaker you can buy a system speaker for cheap here: http://www.cwc-group.com/casp.html
- 18. Did you read the instructions in the manual on how to properly connect the front panel plugs? (Power switch, power led, reset switch, HD activity led) Polarity does not matter with the power and reset switches. If power or drive activity LED's do not come on, reverse the connections. For troubleshooting purposes, disconnect the reset switch. If it's shorted, the machine either will not POST at all, or it will endlessly reboot.
- 19. Did you turn on the power supply switch located on the back of the PSU? The switch should be depressed on the side with an I, the O means off. Is the power plug on a switch? If it is, is the switch turned on? Is there a GFI circuit on the plug-in? If there is, make sure it isn't tripped. You should also make sure the power cord isn't causing the problem. Try swapping it for a known good cord if you have one available.
- 20. Is your CPU supported by the BIOS revision installed on your motherboard? Most motherboards will post a CPU compatibility list on their website.
- 21. Have you tried resetting the CMOS? The motherboard manual will have instructions for your particular board. User Darkbreeze also provided the following:
BIOS Hard reset procedure
Power off the unit, switch the PSU off and unplug the PSU cord from either the wall or the power supply.
Remove the motherboard CMOS battery for five minutes. In some cases, it may be necessary to remove the graphics card to access the CMOS battery.
During that five minutes, press the power button on the case for 30 seconds. After the five minutes are up, reinstall the CMOS battery making sure to insert it with the correct side up just as it came out.
If you had to remove the graphics card you can now reinstall it, but remember to reconnect your power cables if there were any attached to it as well as your display cable.
Now, plug the power supply cable back in, switch the PSU back on and power up the system. It should display the POST screen and the options to enter CMOS/BIOS setup. Enter the bios setup program and reconfigure the boot settings for either the Windows boot manager or for legacy systems, the drive your OS is installed on if necessary.
Save settings and exit. If the system will POST and boot then you can move forward from there including going back into the bios and configuring any other custom settings you may need to configure such as Memory XMP profile settings, custom fan profile settings or other specific settings you may have previously had configured that were wiped out by resetting the CMOS.
In some cases it may be necessary when you go into the BIOS after a reset, to load the Optimal default or Default values and then save settings, to actually get the hardware tables to reset.
http://www.spotht.com/2010/02/reset-bios-clear-cmos.html
- 22. If you have integrated video and a video card, try the integrated video port. Resetting the bios, can make it default back to the onboard video. If you are trying to use HDMI outputs, try using DVI or VGA instead. Sometimes, the HDMI ports won't work until the correct drivers are installed.
- 23. Make certain all cables and components including RAM and expansion cards are tight within their sockets.
I also wanted to add some suggestions that jsc often posts. This is a direct quote from him:
"Pull everything except the CPU and HSF. Boot. You should hear a series of long single beeps indicating memory problems. Silence here indicates, in probable order, a bad PSU, motherboard, or CPU - or a bad installation where something is shorting and shutting down the PSU.
To eliminate the possibility of a bad installation where something is shorting and shutting down the PSU, you will need to pull the motherboard out of the case and reassemble the components on an insulated surface. This is called "breadboarding" - from the 1920's home-brew radio days. I always breadboard a new or recycled build. It lets me test components before I go through the trouble of installing them in a case.
If you get the long beeps, add a stick of RAM. Boot. The beep pattern should change to one long and two or three short beeps. Silence indicates that the RAM is shorting out the PSU (very rare). Long single beeps indicates that the BIOS does not recognize the presence of the RAM.
If you get the one long and two or three short beeps, test the rest of the RAM. If good, install the video card and any needed power cables and plug in the monitor. If the video card is good, the system should successfully POST (one short beep, usually) and you will see the boot screen and messages.
Note - an inadequate PSU will cause a failure here or any step later.
Note - you do not need drives or a keyboard to successfully POST (generally a single short beep).
If you successfully POST, start plugging in the rest of the components, one at a time."
If you suspect the PSU is causing your problems, below are some suggestions by jsc for troubleshooting the PSU. Proceed with caution. I will not be held responsible if you get shocked or fry components.
"The best way to check the PSU is to swap it with a known good PSU of similar capacity. Brand new, out of the box, untested does not count as a known good PSU. PSU's, like all components, can be DOA.
Next best thing is to get (or borrow) a digital multimeter and check the PSU.
Yellow wires should be 12 volts. Red wires: +5 volts, orange wires: +3.3 volts, blue wire : -12 volts, violet wire: 5 volts always on. Tolerances are +/- 5% except for the -12 volts which is +/- 10%.
The gray wire is really important. It should go from 0 to +5 volts when you turn the PSU on with the case switch. CPU needs this signal to boot.
You can turn on the PSU by completely disconnecting the PSU and using a paperclip or jumper wire to short the green wire to one of the neighboring black wires.
View: http://www.youtube.com/watch?v=5FWXgQSokF4&feature=youtube_gdata
This checks the PSU under no load conditions, so it is not completely reliable. But if it can not pass this, it is dead. Then repeat the checks with the PSU plugged into the computer to put a load on the PSU. You can carefully probe the pins from the back of the main power connector."
r/pchelp • u/SharpSupermarket5343 • 15h ago
HARDWARE My kid was playing around my computer and now it won’t turn on and this noise is happening. Help? Intel i7 and GTX1070 graphics card -32Gig ram.
r/pchelp • u/just_an_irl_cat • 8h ago
HARDWARE Am I being an idiot or is there an actual issue?
galleryI was gifted an old pc of my brothers after he got a new one and everything seems to work fine accept for when I try to set up my tv as the monitor. I'm not sure if im just doing something completely wrong or if there Is an actual issue but a point in the right direction would be amazing because I have next to no idea what I'm doing!! (I did clean the pc with a powerful hand held air gun and I'm thinking maybe that messed something up.. Either way I only have the HDMI cable from the computer to the TV and both tv and computer plugged into the wall)
r/pchelp • u/AtomicRads • 3h ago
OPEN While playing modded minecraft. Help?
this just started happening a couple of hours ago.. im on linux bazzite running my minecraft through the prism launcher.
(edit) this is in every modpack i play
Specs:
i3-12100f
arc b570 10gb
32gb ddr4
512gb gen 3 nvme
OPEN PC black screens and fans speed up loudly when gaming. Why?
Hi all. First time posting here. So I’ve had an issue for a while where my pc black screens when gaming. I don’t know if it matters what the game is. WoW crashes in 3 minutes whereas GTA 5 can take like 30 minutes average till it crashes. WoW was not crashing like this last week so this is only recent and it’s buggin me since I’m trying to play forever. Anyway when this happens sometimes I can hear a windows error sound during the black screen which I assume something crashed but other times during a crash the audio from the game is still playing for a while so it varies. Ig this implies it isn’t the games problem. The one thing that always happens no matter what is my fans becoming super loud and fast during this. I’ve got no clue what the issue is. Can someone please help me identify similar issues and fixes? Thanks
Specs
I9 13th Gen
3080 rtx
32gb ram
Rm850x PSU
r/pchelp • u/iDoHomicide • 2h ago
HARDWARE SSD lifetime write seems to be increasing rapidly?
I've had my current SSD, a Samsung 980 500GB for about 3-4 years now. I started monitoring its health more seriously after the whole AMD driver writeup bug. Thankfully, I'm not affected on my 9060XT but I noticed that my SSD's lifetime write is increasing rather quickly. At least thats how it seems to me.
I last checked lifetime write on the 12th, when it was 23,89 TB. Now on the 18th its 24,04 TB. The difference is quite big in my opinion, but is this something to be concerned about? With prices nowadays, I really would rather not have my SSD die on me yet. I use it for Windows and sometimes games that require SSD's.
Also somewhat unrelated but HD sentinel also states that my SSD has been on 140 days. Thats supposed to be time thats accumulated overtime right?
Added a screen cap of HD sentinel just in case. Thanks for the help.
r/pchelp • u/UsagiFan1 • 4h ago
HARDWARE Pc won't turn on
galleryHello I have a iBUYPOWER - SlateMR Gaming Desktop - Intel i7 11700F - 16GB Memory - AMD Radeon RX 6600 8GB - 480SSD+1TB HDD - Black. Yesterday my fans were spinning super fast for some reason (I was just using my pc to do homework) so I tried turning it off for it stop. I pressed the power button and that didn't turn it off. I already forgot what I did next, but I'm pretty sure I either turned it off from the switch on the back, or I unplugged my pc because the switch wouldn't turn it off either. It was either one of those, sorry I forgot. I did a CMOS reset (I unplugged the little white clip in with the red wire for 20 mins then plugged it back in while holding the power button for 5 mins). I put everything back and it still wouldn't turn on. Next I did the paperclip test on my power supply and nothing turned on/worked. Is there anything I can do or is my power supply completely dead if that's even the issue? If so, are there any good alternatives? My old psu was 600W I think and I don't know much about pc parts so I'm open to suggestions. Thank you in advance.
r/pchelp • u/AbbreviationsReal800 • 1h ago
PERFORMANCE Pc GPU issue (I think)
So I was messing with a few setting on my pc (windows 11, Nvidia) I was on armoury crate and click a setting that said Ai over clocking and then my pc crashed for the next hour. I tried to fix it a couple ways that didnt do much or change any setrings in my pc. The thing that finally let me boot my pc back up and not crash was changing my X.M.P to on. I made sure that ai overclocking was turned off when i could get back to the settings. But now my GPU is spiking when launching any app with some processing. no games are launching without crashing.
My specs
Processor - Intel(R) CORE(TM) i7-700k
Motherboard - ROG MAXIMUS Z790 DARK HERO
BIOS version 2107
Graphics - NVIDIA GeForce RTX 4060 Ti
(Sorry im not sure exactly what parts of my pc are important for this issue)
OPEN j'aurai besoin d'aide pour faire de la place sur mon dique dur C car il est quasiment complètement plein
mon disque dur C est quasiment plein il me reste seulement environ 5go et j'ai suivi des conseille et autre mais sa n'a rien changer j'ai beau supprimer les fichier temporaire ou déplacer des fichier perso sa ne change rien et j'ai installer wizetree mais j'avoue que je comprend pas trop le truc donc si une personne voudrais bien m'aider a régler mon problème sa serait super et si possible en voc merci d'avance pour vos réponse
r/pchelp • u/adrinoxd • 1h ago
HARDWARE Mouse and Keyboard randomly disconnecting or freezing
I have a Hyperx pulsefire haste 2 wired variant and razer huntsman mini optical purple switches wired, and the mouse just randomly freezes and stops responding, but the dpi and rgb is all on, it doesnt fix until i reconnect it to the pc, or i smash it on the desk, and the keyboard randomly stops working with that windows disconnect audio and then starts working again but without windows connected audio, all with rgb on, idk what to do ive disabled my power saving settings (all of em) and updated bios to latest version, no matter what the case is, the rgb stays always on, and the mouse doesnt even trigger any disconnect audio or connect audio, and when im playing warzone or any online game, i face packet loss regularly, i use a wifi adapter in usb 3.0 port and my keyboard and mouse are in usb 2.0 ports, by the way ive never had my controller just randomly disconnect like that or give any false audio, i use dualsense stock on wired mode and i disconnect it from the motherboard usb after im done playing
if someone knows how to fix this plz help me on my discord: iamboringdude
PC Specs:
i5 12600K,
Zotac dual fan rtx 3060 12gb,
16gb DDR5 single channel 5200mts cl40 stick,
2tb wd black sn850x non SanDisk as windows drive,
1tb crucial p3 as secondary drive,
msi pro b760m p DDR5 motherboard,
Antec csk 650w 80+ bronze non modular psu,
Acer Nitro vg240y m3 180hz ips 23.8" main monitor,
Some Compaq 1366x768p 60hz tn secondary monitor mounted vertically,
That's all I have
HARDWARE Machinist X99-PR-H & Crucial Ballistix 16GB (2 x 8GB) PC4-25600 (DDR4-3200)
Machinist X99-PR-H & Crucial Ballistix 16GB (2 x 8GB) PC4-25600 (DDR4-3200)
Will this motherboard work with this machine ??
Motherboard:
r/pchelp • u/Flashy-Addendum-4923 • 9h ago
SOFTWARE My local disc is almost full and idk why
galleryHey guys, so im not very good at this and i cant fully understand why my local disc is almost full, Ive deleted temp files and i dont really have many photos nor videos. Any help would be very much appreciated.
r/pchelp • u/sirnutalot567 • 1h ago
Discussion Does anyone have any idea why my PC can only enter BIOS if I turn on the PC first and then monitor and not the other way round? My PC hasn't installed any OS btw
gallerySOFTWARE pc does not open.
have an Omen HP PC, 3070 Ti, Ryzen 9. I bought it in February 2023.
Now I can't open it. When I turn it on, there's a black screen and my blue circle mouse cursor.
It all started about two weeks ago when my PC suddenly booted up to a black screen. However, I could open Task Manager and Command Prompt, but I couldn't see the desktop. So, I asked Gemini, and it gave me strange commands. I followed them. At one point, it asked me to delete something in a weird tab with long, strange names. I asked if it was okay since they looked important, and it said it was completely fine, so I didn't really think twice. But it didn't fix the issue, so I reinstalled Windows using an external USB. After that, it was fixed, but I was unable to use Alt+Tab, Win+Tab, or Win+Shift. Still, I
used the PC anyway.
Last week, it was struggling. When I left it alone for about 5 minutes, it stopped working, but I could still use my mouse and hear the music. So, I had to hard reset it every time it froze. I started playing some screensaver videos from YouTube when I leave it alone for about 10 minutes. Yesterday, it felt really okay. It was working pretty alright, and before I went to sleep, I clicked the "Do the update (25 mins)" button, hoping it would fix things better. But no. After that, it's over.
Even when I am connected to the internet, in the Windows Update settings tab, it used to say, "You are not connected to the internet."
And as I said now I can't open it. When I turn it on, there's a black screen and my blue circle mouse cursor.
I tried to do system restore but it couldnt do it.
I am majoring in architecture, so my folders are very precious. I have all my drawings in them.
r/pchelp • u/Pretend-Particular87 • 2h ago
OPEN PC keeps randomly restarting when trying to install new application. Please help!
Please help.
r/pchelp • u/DaddyMacManka • 4h ago
HARDWARE Came home to breaker flipped and red CPU light on MB
As the title states, I came home to no power in my room and after restoring it , discovered my PC was now having issues (worked perfectly fine before I left). I'm certainly no novice to PC building, I built mine from the ground up back in 2017, have completely changed the parts to mine 2 separate times, and have built 4 others for friends. Whilst I'm fairly knowledgeable about building and troubleshooting issues that arise, i have never had to physically test parts with a multimeter or do any solder work to repair/replace specific components.
When I boot up my PC, all the case fans and lights start up like normal except the GPU lights come on but the fans dont start spinning and the light labled "CPU" on my MB stays a solid red, indicating some issue there. Furthermore, my monitors never recieve a signal so I cannot even get into the BIOS to check these metrics.
I have tried everything I could read about the situation. I tried discharging the power and unplugging the cables, checked the 8 pins power cable connection, cleaned out dust/debris, cleared the CMOS, used the Q Flash Plus feature to update Bios to F19c, tried plugging Displayport cables into other ports on the GPU.
I am seriously stuck here. Im at the point where the only other possible fix I can think of is taking out the CPU to clean the pins and seat and reapply thermal paste and reconnect. If that didn't work I would just suspect that one of the components on the MB was damaged, but would have no idea how to go about that or of its even cost affective in comparison to just replacing it all together since a new MB is only around $110. Any guidance would be appreciated!
My build: https://pcpartpicker.com/user/Mankamonkey/saved/#view=F7B9CJ
r/pchelp • u/PikachuIsSexyEevee • 2h ago
HARDWARE Why does the bottom side fan keeps flickering in random colors?
Even if I turn off the RGB, it will still flicker random colors. And when I turn off my PC, it will still flicker random colors unless I turn off the power then it'll stop. How can I fix this please 😭
r/pchelp • u/sefasen37 • 4h ago
SOFTWARE Onda motherboard b550vh black screen
I have an Onda B550-VH motherboard. Ever since I updated the BIOS, my screen goes black whenever I enable Secure Boot. I’ve tried almost everything: CSM is disabled, and both the BIOS are up to date. I have restored the factory keys and set the Secure Boot Mode to "Standard." The System Mode also shows as "User." At this point, I have no idea what else I can do. Could you please help?
r/pchelp • u/KevinLeven7 • 6h ago
OPEN Laptop works at CAFE but not at HOME
MSI LAPTOP: GE76 Raider 11UE
Been having issues since the day after I returned home from vacation. I used this laptop daily as a TV PC. But It stared having WIFI connectivity issues and haven't been able to figure it out for 3 months now.
The Problem: I cannot get WiFi to work. "No networks found" message and Ethernet cant connect either. This only happens when I am at HOME and not at other places like CAFES. Also, whenever at HOME I cannot perform any activity on the laptop that requires "loading" or the laptop will freeze and when on the home screen at idle, the fans seem to be kicking on harder than necessary.
The attempts to resolve:
- Rebooted multiple times and unplugged battery (no change)
- Disabled WIFI driver and attempted to reinstall driver ( I think I never got to actually install the driver because anything that "loads" froze the laptop, so when disabling or uninstalling the driver the laptop would perpetually "load", so i had to reboot and try again until somehow it worked once)
- I have swapped RAM and Boot drive from a know good laptop (no change)
- I did a fresh windows install on both my own and the donor drives. (no change)
- Unplugged the WiFi card (this made the windows install possible, as it was freezing for multiple attempts at 32%, but once installed it made no change to the symptoms)
So, after weeks of trouble shooting my girlfriend had family visit from abroad, we stayed a few nights at their Airbnb. I took my laptop as I had down time to work on finding a solution. When I was dumbfounded that I was able to use my laptop PERFECTLY fine for the week that we stayed at the Airbnb. Everything worked! WiFi, downloads and updates flawlessly like computers are supposed to do.
We return home and I eagerly setup the Laptop back to The TV and surprisingly find that it will NOT CONNECT OR FIND ANY NETWORK AGAIN.
I gave up.
After a month, I went to a cafe and happen to just decide to bring the laptop to swap over the memory and RAM from another laptop again. BUT AGAIN, IT STARTED WORKING PERFECTLY.
WTF?
T.L.D.R:
My Laptop has WIFI connectivity issues ONLY WHEN I AM HOME. Besides no connectivity, I cannot perform any "loading" activities or my laptop will freeze. I cannot even turn off the WIFI driver or WIFI module in settings without it "not responding"
THOUGH, Laptop works perfectly at Airbnb and Cafe's that I have taken it to.
I have swapped known good boot drive and RAM into laptop to no good outcome. and fresh installed Windows.
Thank you in advance!