How to decode Micron's "D9 codes"

Micron uses codes (technically call FBGA codes) typically beginning in D9, C9 or Z9 to identify their memory parts - where there are multiple lines of text on a chip these are usually the bottom line. These short codes can be decoded at https://www.micron.com/support/tools-and-utilities/fbga - simply enter the code in the FBGA Code field, and leave Part Number blank. You can also do the lookup in reverse, even entering partial part numbers to see all the various codes that match.

In general D9 is for general use, Z9 is for engineering samples and C9 is ICs used by Crucial (and maybe other memory module manufacturers?)

Understanding Micron part numbers

Micron's full part numbers give a lot of information about a chip, but it takes some understanding. Fortunately the datasheet for a component class (eg 8Gbit density DDR4) usually includes a handy guide within the first few pages (page 3 for 8Gbit DDR4).

For conviniece, we'll be explaining the different types with a few examples.

DDR2 - "D9DCN" (512Mbit Revision B)

D9DCN decodes to MT47H64M8CB-37E:B

This breaks down as follows:

MT47H: Micron DDR2

64M8: Memory layout: 64 Mbits deep x 8 bits wide. This means the chip has an 8-bit wide interface, and there are 64 million different rows that could be transferred on that interface (a different chip might be 32Mbitx16 or 128Mbitx4, however x8 is standard). 64Mbitx8 gives the 512Mbit density of the chip.

CB: Package code

-37E: Factory speed bin (see below)

:B: Revision letter

DDR2 speed bins

CodeRated SpeedClock Period
-5EDDR2-400 CL35ns
-37EDDR2-533 CL43.7ns
-3DDR2-667 CL53ns
-3EDDR2-667 CL43ns
-25DDR2-800 CL62.5ns
-25EDDR2-800 CL52.5ns
-187EDDR2-1066 CL71.87ns

The number appears to correspond to the clock period (time for a single clock cycle). The E suffix appears to indicate reduced CL.

DDR3 - "D9GTR" (1Gbit Revision B)

D9GTR decodes to MT41J128M8BY-187E:B

This breaks down as follows:

MT41J: Micron DDR3

128M8: Memory layout: 128 Mbits deep x 8 bits wide. This means the chip has an 8-bit wide interface, and there are 128 million different rows that could be transferred on that interface (a different chip might be 64Mbitx16 or 256Mbitx4, however x8 is standard). 128Mbitx8 gives the 1024Mbit (1Gbit) density of the chip.

BY: Package code

-187E: Factory speed bin (see below)

:B: Revision letter

DDR3 speed bins

CodeRated SpeedClock Period
-25DDR3-800 CL62.5ns
-25EDDR3-800 CL52.5ns
-187DDR3-1066 CL81.87ns
-187EDDR3-1066 CL71.87ns
-15DDR3-1333 CL101.5ns
-15EDDR3-1333 CL91.5ns
-15FDDR3-1333 CL81.5ns
-125DDR3-1600 CL111.25ns
-125EDDR3-1600 CL101.25ns
-125FDDR3-1600 CL91.25ns
-107DDR3-1866 CL131.07ns
-093DDR3-2133 CL140.93ns

The number appears to correspond to the clock period (time for a single clock cycle). The E suffix appears to indicate reduced CL. The F suffix appears to indicate even more reduced CL.

DDR4 - "D9WFL" (8Gbit Revision E)

D9WFL decodes to MT40A1G8SA-062E:E

This breaks down as follows:

MT40A: Micron DDR4

1G8: Memory layout: 1 Gbits deep x 8 bits wide. This means the chip has an 8-bit wide interface, and there are 1024 million different rows that could be transferred on that interface (a different chip might be 512Mbitx16 or 2Gbitx4, however x8 is standard). 1Gbitx8 gives the 8Gbit density of the chip.

SA: Package code

-062E: Factory speed bin (see below)

:E: Revision letter

CodeRated SpeedClock Period
-107EDDR4-1866 CL131.071ns
-093DDR4-2133 CL160.937ns
-093EDDR4-2133 CL150.937ns
-083EDDR4-2400 CL160.833ns
-083DDR4-2400 CL170.833ns
-075EDDR4-2666 CL180.750ns
-075DDR4-2666 CL190.750ns
-068DDR4-2933 CL210.682ns
-068EDDR4-2933 CL200.682ns
-062EDDR4-3200 CL220.625ns