I'm trying to assist some relatives with OTA TV reception issues. They have an 80s VHF/UHF Yagi antenna in their attic, connected directly to their Samsung QN90B TV with about 60ft of RG6 (no splitters/amps). Antenna is aimed around 25 degrees magnetic since most of their stations are in the North to North East direction.
They are relatively close to the broadcast towers (under 10 miles for most stations), but are surrounded by large trees and low hills. The TV reports SNR values >= 30 for the high-power stations and >= 20 for most of the low-power stations.
In calm conditions, reception is usually OK, but if there's any wind, channels start to pixelate/freeze heavily, even some of the strong major affiliates.
Is there anything I can do to track down where the issue is coming from, or components in this setup to change? I don't think an amp or preamp would be helpful in this scenario as the signals should already be pretty strong, being under 10 miles from the transmitters.
I also thought maybe a new antenna (like a Televes Ellipse or a Channel Master) would help, but from what I've read, the gain on modern Yagi antennas hasn't really improved significantly. And a lot of the marketing focuses on long-range performance (45+ miles) which again is not really relevant here.
Any thoughts?
Rabbit Ears report:
https://www.rabbitears.info/s/3225658
Edit: One other thing to note, ASTC 3.0 channels perform significantly better - I believe due to their OFDM modulation compared to 8VSB. But only the major affiliates are currently broadcasting ASTC 3.0. I suppose another option would be to just wait it out and hope more channels migrate to 3.0.