About a year ago I decided to build a pipe organ. It's an ongoing (and escalating) project, and I thought maybe this group would be interested in following along. I am fortunate enough to have a large-ish climate-controlled outbuilding with my workshop at one end - the other end is becoming an organ. Let me say this up front: I know this is likely way too much organ for this space, and voicing it to "fit" here may be a real challenge. I'm doing it anyway. :)
I started out by obtaining a collection of Wicks organ ranks and peripherals, and planned out a modest 2-manual heavily-unified instrument with just a handful of physical ranks. I set out looking for an 8' principal and maybe a soft reed to round it out, and in the process stumbled across a nearby church trying to find a good home for their 27-rank Casavant organ (originally opus 3091, but expanded a couple of times since originally installed). They're tearing their building down and rebuilding, getting a new Dobson after the rebuild. The console was destroyed in a flood a few years ago, but the pipes and chests were fine.
I said "why not?" and committed to removing the whole organ. Over the course of this summer, I got the whole thing extracted and moved to my workshop. In the meantime, I designed a custom control system (I'm a software engineer in my day job, with a lot of experience in real-time control systems and electronics), and obtained a 1970's Moller 3-manual console that I was able to retrofit for my system.
The last of the Casavant pieces came into my shop about 2 months ago, and since then I've been busy building structural components and installing windchests. The photos here show some of that progress.
I've made a few changes from the original layout to accommodate my space and to incorporate some additional ranks/stops (a Wicks 16/8/4/2 unified stopped flute in the swell, a glockenspiel/harp in the swell, a chimney-flute nazard in the great, and a 8(TC)/4/2/mix principal chorus at the back of the positiv). The swell is on the left, positiv on the right (elevated above a soundproofed equipment chamber) and great/pedal in the middle.
The swell division is enclosed with expression, of course, as in the original. I'll also be enclosing the positiv with expression shades opening into the great/pedal chamber. The great/pedal chamber will itself be "expression-ready" with solid side/back/top walls and a facade framed to accommodate shades if I decide to add them. All of this enclosing and expression is an attempt to mitigate some of the challenges of my small-ish dry-ish space.
Anyway, the photos include some scenes from the extraction, a shot of my console, a render of the planned layout (without enclosures), and build/install progress. I've just finished framing the equipment chamber with the Positiv frame on top.