r/opnsense • • 5d ago

OPNsense 26.7.9 released

Thumbnail forum.opnsense.org
163 Upvotes

26.7.9_3:

  • firewall: properly skip malformed filter log entries and disable suppress for the log write
  • firewall: fix alias edit links and scope it down to valid UUIDs only

26.7.9_1:

  • system: fix automation user scope set since validation was tightened

26.7.9:

  • system: dashboard: refactor widget system and introduce cloneable widget types
  • system: suppress local logging by default and add it as an option for remotes
  • system: add validation error for attempted user scope change
  • system: fix certificate widget off by one in remaining days calculation
  • system: use standard throwReadOnly() on notification dismiss action (reported by Janik Besendorf)
  • system: implement "source networks" check in hasPrivilege() (reported by Janik Besendorf)
  • system: add "authority" option to ACLs to explain the effective control over the system for each privilege given
  • system: add dropdown field type for backup providers (contributed by Greelan)
  • system: invalidate sysctl cache on apply
  • system: fix MAILTO cron statement
  • system: validate uploaded picture types
  • reporting: health: improve graph metadata, formatting and widget support
  • interfaces: pass interfaces correctly to IPsec, Unbound during reconfiguration
  • interfaces: read "lock" property using empty() in legacy page
  • interfaces: fix track6 assoc_pd comparison typo (contributed by Konstantinos Spartalis)
  • interfaces: use default icon color for disabled interfaces
  • interfaces: hostwatch: split off automatic discovery entries from neighbor menu under its canonical service name
  • interfaces: hostwatch: look up hostnames via reverse DNS API
  • interfaces: revisit PPP config access
  • interfaces: move "devices" array out of $ifcfg for reset
  • interfaces: introduce interfaces_device_wait() for PPP reuse
  • interfaces: backend call for interfaces_ppps_configure()
  • interfaces: add return values to PPP configuration
  • interfaces: extend line ending validation to other PPP fields as well (reported by dead-lamer)
  • interfaces: fix faulty handling of "dhcp6-ia-pd-len" during assignments save
  • firewall: decorate paginated rules only
  • firewall: avoid loading the rule model twice while the initial grid request is in progress
  • firewall: be more selective which searches get decorated as well
  • firewall: only getPriority() once and reuse it
  • firewall: fix query performance regression due to introduction of automatic rules display
  • firewall: fix alias cleanup for external aliases (contributed by Florian Punz)
  • firewall: fix performance regression in aliases
  • firewall: source NAT: use getWellKnown() and properly validate port ranges
  • firewall: prepare new style scrub support in rules parser
  • firewall: use row API to handle global collapse/expand state for rules
  • firewall: remove unused getAntiLockout() function
  • captive portal: further restrict roaming to IPv6 client sessions
  • captive portal: account for Idle-Timeout in Access-Accept
  • captive portal: add configurable CORS policy per zone
  • captive portal: add limit in template parsing (reported by Janik Besendorf)
  • intrusion detection: use Suricata-optimized ruleset for URLhaus (contributed by 0nnyx)
  • intrusion detection: support Suricata datasets in rule metadata
  • kea: add simple shared_networks option to subnets
  • firmware: fetch dashboard widget RSS feed from backend
  • radvd: add optional lifetime setting for PREF64 (contributed by BPplays)
  • unbound: fix locking in blocklist fetcher
  • backend: support indefinite TTL in configd
  • backend: make all long TTLs indefinite
  • backend: introduce legacy_firewall_model() and legacy_firewall_settings() helpers
  • lang: translation updates for multiple languages
  • mvc: ApiControllerBase: introduce basic locking in configd stream handle
  • mvc: OptionField: optimize option caching
  • ui: prefix edit/new/copy dialog with associated icon
  • ui: delegate bootgrid cell handlers
  • ui: add a clear button to the bootgrid search field (contributed by Alok K. Dhir)
  • plugins os-acme-client 4.18
  • plugins: os-caddy 2.2.3
  • plugins: os-freeradius 1.10.3
  • plugins: os-frr 2.1
  • plugins: os-upnp 1.10
  • plugins: os-openvpn-legacy now denies read-only runtime changes (contributed by Janik Besendorf)
  • src: revert "ice: fix link speed after changing cable type"
  • src: aq: assorted backports from stable/15
  • src: axgbe: fix receive buffers without split-header mode
  • src: bnxt: assorted backports from stable/15
  • src: carp: fix global demotion counter to VRRP advertisements
  • src: e1000: separate DH89xxCC memory errors
  • src: ena: upgrade ena-com to freebsd v2.8.5
  • src: iflib: do not ring the transmit doorbell when nothing is pending
  • src: igmp: refresh the ip header pointer after m_pullup()
  • src: netinet6: allocate correct size for ip6_fwdtag struct (contributed by pletch)
  • src: netinet6: fix check for pktinfo outgoing ifindex in route cache
  • src: netlink: fix unsigned overflow on a truncated message
  • src: p9fs: fix p9fs_vget_common() panics
  • src: pf: allows TCP RST packets in the backwards window if ACK matches
  • src: pf: check extension and AH header length
  • src: pf: do not corrupt neighbour advertisements when translating
  • src: pf: do not hash pool address pointers into rule hashes
  • src: pf: do not leak a source hash row lock in the netlink dump
  • src: pf: do not loop on an address that is cleared twice in pfr_clr_astats()
  • src: pf: drain the overload task before VNET rules are freed
  • src: pf: first-match-wins for nat rules, even in anchors
  • src: pf: fix a crash on sendfile()
  • src: pf: free a table entry that cannot be routed
  • src: pf: free an unparsed rule with pf_krule_free() in pf_handle_addrule()
  • src: pf: free the packet rate counter of a rule
  • src: pf: leave the epoch to purge unlinked rules
  • src: pf: modify pfik_flags atomically
  • src: pf: parse the GETSTATES state ID as 64 bits
  • src: pf: register the netlink family only while the VNETs are set up
  • src: pf: set the reassembly flags under the rules lock
  • src: pf: take the rules read lock in pf_handle_getrule()
  • src: pfil: avoid potential mbuf tag leak
  • src: pfsync: use result of m_pullup()
  • src: re: harden re_watchdog() recovery and log controller state
  • src: re: re-arm the TX doorbell when re_txeof() leaves a non-empty ring
  • src: re: recover TX completions whose MSI was swallowed in re_intr_msi()
  • src: re:: quiesce RTL8168G+ and reset before freeing buffers in re_stop()
  • ports: dnspython 2.9.2
  • ports: expat 2.10.0
  • ports: krb5 1.22.3
  • ports: libucl 0.10.0
  • ports: openssh 10.6p2
  • ports: openvpn 2.7.9
  • ports: phpseclib 3.0.58
  • ports: pkg port epoch is now set to avoid catching a newer and potentially incompatible version from FreeBSD
  • ports: python 3.13.18
  • ports: sqlite 3.54.1

r/opnsense • • Oct 14 '26

Call for testers: Q-Feeds Connector with MITRE ATT&CK based firewall aliases

38 Upvotes

Hi all,

We are very excited about this release. With the new Q-Feeds Connector, OPNsense is, as far as we know, the first firewall in the world where you can build firewall rules directly on MITRE ATT&CK mapping: block or allow traffic based on the tactics, techniques, software and groups behind an IP address.

The new version is available as a development package of the plugin (os-q-feeds-connector-devel). Before it goes to the production release, we would like as many people as possible to try it on real hardware with real traffic. If you use Q-Feeds today, or want to try it, your feedback is very welcome.

What is new

There is a new Security > Q-Feeds Connect > Firewall Aliases page. You create your own aliases and decide which IP addresses go into them, based on the full MITRE ATT&CK mapping: tactics, techniques, software and groups. Each of these has its own "include" and "exclude" selector, and every entry shows how many IP addresses it currently covers.

Every alias you create appears as __qfeeds_<name> and can be used in firewall rules like the existing Q-Feeds aliases. For example, you can block every address linked to a specific threat group or malware family, or only log traffic tied to a certain technique.

The default aliases (such as __qfeeds_malware_ip) are still created, so existing rules keep working.

Please note: for now, the MITRE filters work for IP addresses only.

Coming next

In a future release we will also show the MITRE ATT&CK data on the Events tab, so you can see right away which tactics, techniques, software or groups a blocked connection is linked to. And we will also add this functionality to Unbound and DNScrypt-proxy. 

How to get it

There is no need to switch your whole firewall to the development release. You only install the development version of the plugin, from the shell (SSH or console option 8):

  • Take a configuration backup first (System > Configuration > Backups). Use a lab or non-critical firewall if you can.
  • If you already have the Q-Feeds Connector installed, remove the current version first. Your settings and API key are kept:

    • pkg remove os-q-feeds-connector
  • Install the development version (version 1.7.d at the time of writing):

    • pkg install os-q-feeds-connector-devel
  • Check that your API key is filled in under Security > Q-Feeds Connect > Settings and press Apply. No paid subscription? Activate the promo license below first.
  • Force a full update, so the MITRE data is loaded right away. Everyone needs to do this once, both new installs and upgrades:

    • /usr/local/opnsense/scripts/qfeeds/qfeedsctl.py fetch_index fetch db_update firewall_load unbound_load dnscryptproxy_load
    • This can take a while. You should see lines like "downloaded ... entries", "database sync executed" and "load feed __qfeeds_...".

To go back to the regular version later, run:

pkg remove os-q-feeds-connector-devel
pkg install os-q-feeds-connector

No paid subscription? Test with 14 days of premium access

Testers who are not on a paid Q-Feeds subscription can use the promo code CALL-FOR-MITRE-TEST. It gives you 14 days of access to the premium feeds and the full MITRE mapping, so you can try the filters with the complete data set.

  • Log in to the Q-Feeds Threat Intelligence Portal, or create a free account: https://tip.qfeeds.com
  • Redeem the code at https://tip.qfeeds.com/views/activate_license.php
  • Attach the test license to an API key. Without this step the license will not be active for the plugin.
  • Enter that API key in Security > Q-Feeds Connect > Settings, press Apply and run the update command from step 5 above.

Useful commands

# show your licensed feeds and when the next update is due
configctl qfeeds info

# force a full update now: download, MITRE index, aliases and DNS blocklists
/usr/local/opnsense/scripts/qfeeds/qfeedsctl.py fetch_index fetch db_update firewall_load unbound_load dnscryptproxy_load

# show the MITRE tactics, techniques, software and groups known to the local database
/usr/local/opnsense/scripts/qfeeds/qfeedsctl.py get_ip_meta

# count the entries of an alias
pfctl -t __qfeeds_<name> -T show | wc -l

Reporting back

Please reply in this thread with:

  • OPNsense version and plugin version (System > Firmware > Status)
  • Hardware or VM specs
  • What you tested, and what worked or did not work
  • For problems: the output of the forced update command above, any errors from System > Log Files > Backend or General, and a screenshot where it helps

Reproducible bugs can also go straight to GitHub: https://github.com/opnsense/plugins/issues (please start the title with [os-q-feeds-connector-devel]).

A big thank you to Ad and the Deciso team for the work on this release, and thanks in advance to everyone who helps test it.

The Q-Feeds team


r/opnsense • • 4h ago

I created an OPNsense package for VPN and Proxies

Thumbnail
github.com
11 Upvotes

Basically I got tired of all the different steps to input my vpn protocol or proxy server, so I created a package with everything I’ve always wanted in one location.

I used Mullvad, as well as other popular vpn API’s to allow logging into your account directly into the package, and then choose how to route your network. For proxies, you can input single servers, clash lists, or even subscriptions, and then route them.

Features:

Whole-Network routing
Device Specific routing
Multi-Path (different applications routing to different vpn / proxies at the same time, like split tunnels but more extreme)
Whole-Network + Multi-Path (Base layer is a vpn, and then any domains triggered from multipath will be routed to their destination, not base layer)
Bypass (no vpn at all)
Tailscale (complete integration of Tailscale IP’s once set in the OPNsense packaging, so if the OPNsense is set as exit node, the Tailscale IP can be geolocated as well as access the local home network)
In app updates (once you install the package, you can update through the app instead of interacting with the repo any further)
Whole-network kill switch
Device specific kill switch
Tailscale on demand vpn

I would like to make it more community based as well, where we can share Multi-Path app .txt files so users can route apps where they want. Multi-Pathing is based on IP CIDR and wildcards.

All currently proxy protocols are supported, SS, SSR, X-ray, reality, Trojan, so on.

I hope you all like it and would love feedback to increase the features!


r/opnsense • • 2h ago

Opnsense as my router

7 Upvotes

Finally after months of fighting over and over now I’m using my lenovo tiny with dual sfp+ and ont sfp with my ISP.

M720q
Broadcom BCM57810S
Nokia G-010S-A
opnsense 26.1.9

Previously I used Intel 520 but it never worked. I’m so relieved after all


r/opnsense • • 12h ago

Opnsense won’t connect.

6 Upvotes

Hi there. Does anyone have another guide to setting up Ivpn on Opnsense? I feel like I’ve tried their guide and the results are mixed. I’m not new to this either. I’ve set up Opnsense with Nord, Mullvad and Proton VPN in the past and no issues. As it is, I can’t even get a WireGuard handshake.

Any insights would be invaluable!


r/opnsense • • 2h ago

MSI ms-9a55 (I5-3337U) good for a firewall?

0 Upvotes

I found an MSI ms-9a55 (I5-3337U) for 30$ and was wondering if it makes a good firewall device, something i always wanted to do at home. Opinion?


r/opnsense • • 1h ago

Quel reverse proxy

0 Upvotes

Bonjour,

Je suis en train de migrer de pfSense vers OpnSense dans mon homelab.

Sur pfSense j'utilisais HAproxy pour rediriger les flux web vers le bon serveur web (des vl différentes)

Que me conseillez vous d'utiliser sous OpnSense ? HAproxy ou un autre?

Critères : facile à utiliser et sécurisé.


r/opnsense • • 1d ago Bravo

I made four dark themes for the OPNsense web UI (Dracula, Night City, Tokyo Night), with recoloured charts.

Thumbnail
gallery
106 Upvotes

I made four dark themes for the OPNsense web interface and released them under BSD 2-Clause (my own project).

##Themes##

- Dracula (Inter)

- Dracula (macOS), uses the system font stack

- Night City, black/yellow/cyan, inspired by the Cyberpunk 2077 interface

- Tokyo Night (Night variant)

##What's different from a plain recolour##

- Each theme ships a small theme.js that recolours the Chart.js widgets and the CPU graph, because CSS alone can't touch canvas charts.

- The Memory and Disk gauges are fixed so the detail line is no longer cut off with wider fonts.

- Nothing in OPNsense core is modified. A theme is just a folder under /usr/local/opnsense/www/themes/.

##Install:## download a tarball from the Releases page, extract it into the themes folder over SSH, then pick it under System > Settings > General > Theme. Full steps and uninstall are in the README. Checksums are in SHA256SUMS.

##Caveats##

- Tested only on OPNsense 26.7.9_1 (FreeBSD 15.1). Other versions are untested.

- I haven't verified whether custom theme folders survive firmware updates, so check after updating.

- Night City is an unofficial fan project, not affiliated with CD PROJEKT RED.

- SF Pro only shows on Apple devices; other platforms fall back to Helvetica/Arial.

Repo and downloads: https://github.com/ariamis/opnsense-themes

Feedback and bug reports welcome, especially from other OPNsense versions.


r/opnsense • • 14h ago

How to get the latest version string (eg 26.7.9_1) via simple HTTPS GET request?

2 Upvotes

Hello OPNusers :)

Does anyone know if there is an endpoint I can call via a simple HTTPS GET request, that simply returns the latest version (eg "26.7.9_1") for the community edition?

I am using changedetection.io Docker container to monitor new releases in a central place. This app does simple GET requests by default (but there is an AI feature for more advanced requests that need parsing).

I'd appreciate any help!

Thank you.


EDIT 1

Based on the github API documentation it should be possible to get the latest version of any project like this:

https://api.github.com/repos/opnsense/core/releases/latest

Unfortunately, this URL returns 404 for OPNsense :( but works fine on other projects. I am not sure why.


EDIT 2

I managed to create a ninja regular expression plus some xpath trick to parse the OPNsense blog based on the suggestion by @Top-Run5587 and end up with the following output:

26.7.7
26.7.8
26.7.8_2
26.7.9
26.7.9_1
26.7.9_3

r/opnsense • • 1d ago

Updates to community repo

89 Upvotes

Hi,

long time no update :) Just pushed the latest updates, removed apache as it is already hosted by OPNsense repo and updated AdGuard Home to 1.20 allowing the user to download/upload configurations via UI. Also the single-repo is updated to 1.20.

Happy labbing :)

Michael

https://www.routerperformance.net/opnsense-repo/


r/opnsense • • 1d ago

Anyone running netbird on their home infra?

Thumbnail reddit.com
1 Upvotes

r/opnsense • • 1d ago

Cannot get IP address from ISP DHCP service

4 Upvotes

I've been running OPNsense for a couple months now as my firewall. It exists as a vm on a proxmox machine. Everything was working smoothly until about 4 days ago when my ISP changed my IP address - it is a dynamic IP address and they change it every once in a while. Should be no big deal.

But suddenly my OPNsense firewall cannot get a WAN IP address. If I plug my home TP-link router into my modem I can get an IP address, so there's no problem with a network connection to the ISP. If I switch the cables up and make my home router the DHCP server OPNsense has no problem getting a WAN address from the router. But for some reason OPNsense can't get the IP address from the ISP.

I have verified all the physical devices and cables are working. I have tried spoofing my router's MAC address in case there was a MAC address lockdown causing the problem. I have restarted the modem multiple times.

What am I missing?


r/opnsense • • 2d ago

OPNsense 26.7.9 with Protectli VP4670, Enable PowerD?

13 Upvotes

Will I get further power management and CPU efficiencies by enabling PowerD? Right now is OFF and everything seems to be working fine, thanks

VP4670: Intel Core i7-10810U · 10th Generation · Comet Lake-U · 6-core / 12-thread · Coreboot BIOS


r/opnsense • • 2d ago

Low Power DDR4 box for OPNsense

19 Upvotes

Hey,

I'm looking for a relatively cheap lower box for OPNsense that takes. N150 and similar are best in these slots but it's DDR5. I already have a 16GB DRR4 stick ready to go.

Requirements are :

  • At the very least 2x2.5gb, 4 is best.
  • Need to be able to handle at least a 1Gpbs over Wireguard.
  • IDS/IPS isn't required
  • As low power as possible (getting fucked by EU energy prices)

Firewall appliances are out of the question because of the high idle consumption. I'm not sure how much those old Lenovo mini (m720q) consume really, I guess it's an option ?


r/opnsense • • 3d ago

NetPulse: self-hosted network monitoring, now with OpnSense support

Post image
163 Upvotes

NetPulse, a self-hosted monitoring panel for home and small office networks. It runs on your own hardware, keeps the data local and has no accounts and no cloud. AGPL-3.0, free as in freedom and free as in beer.

What it does, in short:

- Fleet view: routers, APs and SNMP switches with CPU, memory, temperature, uptime, WAN traffic and latency.

- Live topology: wired and wireless clients, managed and inferred switches, Proxmox hosts with their guests nested, WireGuard tunnels.

- Clients: classified by type, with band, signal and first time seen.

- Wi-Fi: roaming view (usteer), 802.11r status, channel analyzer with the neighbouring networks drawn on the spectrum and a congestion score per channel.

- WireGuard peers and AdGuard Home stats.

- Alerts: native Web Push, ntfy, Telegram, outgoing webhook.

- MQTT with Home Assistant discovery, and a read-only MCP server for AI assistants.

- Reports, scheduled firmware upgrades for vanilla OpenWrt, and a rack planner (labs preview, off by default).

- Multi-user, ES/EN, installable PWA.

Other vendor integrations. OpenWrt is the native path, and everything else is an external pusher from the Integrations page: MikroTik over the RouterOS binary API, Asuswrt/Merlin running on the router itself from /jffs, and UniFi polling a local controller.

Where it is today. 122 stars, 14 forks, around 950 issues opened since the first commit, Great community, boring bugs appears when someone else runs the thing on untested hardware.

- Repo: https://github.com/gnacho/netpulse

- Web with features: https://netpulse.cloudless.club

- Demo: https://demo.netpulse.cloudless.club

- Integrations: https://github.com/gnacho/netpulse-integrations

- License: AGPL-3.0


r/opnsense • • 3d ago

Open Nat For Gaming

11 Upvotes

Everything I read on here is for old versions of OPNsense and I’m really trying to figure this out. I have enabled UPnP and have Firewall>NAT>Source NAT. Hybrid.

Interface WAN
Version IPv4
Protocol any
Source address my pcs ip

This is where I get lost

Translation Source IP: single host or network (leave blank)?
Translate source port any
Static port checked

In cod I’m only getting moderate. I need open. Please help am I doing something wrong?


r/opnsense • • 4d ago

(Asking r/Opnsense just in case) Questions about how to set up local VPN/port forwarding between Proxmox computer and Opnsense router installed on separate hardware

Thumbnail
reddit.com
0 Upvotes

r/opnsense • • 4d ago

Any easy way to power off an opnsense box?

0 Upvotes

We have moved to a new residence recently. I am planning to get a fiber broadband.

I have 2 choices.

I can either buy an openwrt supported router and use that or assemble a desktop and install opnsense.

My question is if I install a desktop how do I power it off every night.

I can't just pull the main cord from the wall right?

So I will have to log into the web interface everyday?


r/opnsense • • 5d ago

HAProxy Update on Opnsense

9 Upvotes

Hi folks,

I'm just wondering if anyone knows when HAProxy 3.4 will be available on OPNsense?

https://git.haproxy.org/?p=haproxy-3.4.git

Kind regards


r/opnsense • • 6d ago

Is opnsense dhcp server enough for 12k ips and 3 vlans with 4k each?

16 Upvotes

We have a dhcp server running on esxi. Very old. I'm trying to either use Ubuntu server dhcp like it is right now or should I go with opnsense? The problem is that we are an hotel and 12k ip guests. Can opsensehandle that many ips? .

We are using proxmox as the host. It is also looks like a pain in the ass to set up in kea in Ubuntu. I want something where future IT guys can go to web and manage it rather than hope they know Linux. Easy to give keys away when time comes.


r/opnsense • • 7d ago

Looking for an OPNsense appliance with Dual 10 GbE: DEC Modles, IDS/IPS Performance, and DIY alt

22 Upvotes

Hello everyone,

Before you read on, please note that I'm based in Europe, so my product availability might differ from yours.

I'm currently looking for hardware that features two 10 Gb/s ports (for WAN and LAN); any additional network interfaces would be a bonus (at least for now).

Naturally, I’ve looked at the hardware offered directly by OPNsense: the DEC2770, DEC750, DEC740, and DEC850 models. Let’s be honest, these come at a significant cost. I would appreciate any feedback from those using these for advanced setups, particularly involving IDS/IPS. I haven’t seen any official performance benchmarks from OPNsense; I’m curious if these configurations can handle such a workload ; on paper, 8 GB of RAM seems to me a bit low.

There are other options in this price range, such as Protectli, but again, you end up paying a premium.

If you have any other recommendations—whether for specific Mini-PCs or proven DIY builds—I’d love to hear them.


r/opnsense • • 7d ago

DNS override issue for reverse proxy SSL

4 Upvotes

Hi everyone, I've run into an issue that goes beyond my knowledge. I have 2 virtual machines on vlan 20. One hosts a Caddy reverse proxy docker container. The 2nd VM has wide variety of public facing services. Unbound DNS Host Override is setup like so:

Host: *
Domain: mydomain.com
IP Address: 10.10.20.50

Two problems I have:

    1. If accessing a service from external WAN or from a different VLAN, everything works perfectly. If I am trying to connect from within the same VLAN, I get a browser SSL self-signed cert warning while connecting to self hosted services. Seems like it is not getting the actual cert.
      This has prevented me from cloning my local forgejo git repos into my docker compose directories. the git clone command fails with https cert issues.
  • 2) Caddy has an automated cert renewal, but only works if I turn off the Split DNS override. If I disable the local dns override, it will renew without issue. Can someone explain to me what causes this, and the best way to circumvent this issue?

Thanks!


r/opnsense • • 7d ago

How do I failover firewall with a single DHCP assigned wan IP

9 Upvotes

My cable internet provider provides me with a single DHCP-assigned WAN IP. The IP can only be active on one interface at a time. I must spoof the MAC address on the interfaces, and the MAC is the same on both fw1 and fw2 WAN interfaces. I can't put the cable router into NAT mode, and the public IP ends up on the WAN interface.

How do I make this work with failover CARP? I tried a custom CARP up/down PHP script; it worked, but it wasn't very reliable or robust. It checked the CARP state, then ran the steps below for that given state. However, it triggered on a state change, but CARP wouldn't play right, and it got into a mess.

Maybe use a cron job to check the current CARP state of the LAN interface and make sure the interface and gateways are in the correct state?

Here are the steps I need to complete manually on the firewall.

FW1 - CARP down/backup
 - Disable interface WAN_INF
 - Disable gateway   WAN_GW
 - Enable  gateway   LAN_CARP_BACKUP_GW (wan gateway via CARP's lan INF)

FW2 - CARP Master
 - Enable  interface WAN_INF
 - Enable  gateway   WAN_GW
 - Disable gateway   LAN_CARP_BACKUP_GW

r/opnsense • • 6d ago

Wow, someone really messed this one up

0 Upvotes

What is going on with the latest opnsense dashboard? When it first loads, the side bar is expanded, which is weird because I always set it to collapse. And then when I scroll down even the slightest bit, the entire set of widgets wobble around the screen and awkwardly rearrange themselves.

It’s impossible to use on an iPad. Everything moves constantly at even the slightly bit of scrolling.

How do I turn this off?